[PATCH 2/4] ARM: dts: STiH407-pinctrl: Update gpio-cells to 2
patrice.chotard at st.com
patrice.chotard at st.com
Wed Aug 10 06:12:59 PDT 2016
From: Patrice Chotard <patrice.chotard at st.com>
This patch allows to use second parameter to the gpio
specifier, which is used to specify whether the gpio is
active high or low.
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 52 +++++++++++++++++-----------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index a538ae5..5653840 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -58,7 +58,7 @@
pio0: gpio at 09610000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x100>;
@@ -66,7 +66,7 @@
};
pio1: gpio at 09611000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
@@ -74,7 +74,7 @@
};
pio2: gpio at 09612000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
@@ -82,7 +82,7 @@
};
pio3: gpio at 09613000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
@@ -90,7 +90,7 @@
};
pio4: gpio at 09614000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
@@ -99,7 +99,7 @@
pio5: gpio at 09615000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
@@ -373,7 +373,7 @@
pio10: pio at 09200000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x100>;
@@ -381,7 +381,7 @@
};
pio11: pio at 09201000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
@@ -389,7 +389,7 @@
};
pio12: pio at 09202000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
@@ -397,7 +397,7 @@
};
pio13: pio at 09203000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
@@ -405,7 +405,7 @@
};
pio14: pio at 09204000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
@@ -413,7 +413,7 @@
};
pio15: pio at 09205000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
@@ -421,7 +421,7 @@
};
pio16: pio at 09206000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x6000 0x100>;
@@ -429,7 +429,7 @@
};
pio17: pio at 09207000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x7000 0x100>;
@@ -437,7 +437,7 @@
};
pio18: pio at 09208000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x8000 0x100>;
@@ -445,7 +445,7 @@
};
pio19: pio at 09209000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x9000 0x100>;
@@ -930,7 +930,7 @@
pio20: pio at 09210000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x100>;
@@ -951,7 +951,7 @@
pio30: gpio at 09220000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x100>;
@@ -959,7 +959,7 @@
};
pio31: gpio at 09221000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
@@ -967,7 +967,7 @@
};
pio32: gpio at 09222000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
@@ -975,7 +975,7 @@
};
pio33: gpio at 09223000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
@@ -983,7 +983,7 @@
};
pio34: gpio at 09224000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
@@ -991,7 +991,7 @@
};
pio35: gpio at 09225000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
@@ -1090,7 +1090,7 @@
pio40: gpio at 09230000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
@@ -1098,7 +1098,7 @@
};
pio41: gpio at 09231000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
@@ -1106,7 +1106,7 @@
};
pio42: gpio at 09232000 {
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
--
1.9.1
More information about the linux-arm-kernel
mailing list