[PATCH v4] arm64: mm: convert __dma_* routines to use start, size
Kwangwoo Lee
kwangwoo.lee at sk.com
Tue Aug 9 19:32:46 PDT 2016
__dma_* routines have been converted to use start and size instread of
start and end addresses. The patch was origianlly for adding
__clean_dcache_area_poc() which will be used in pmem driver to clean
dcache to the PoC(Point of Coherency) in arch_wb_cache_pmem().
The functionality of __clean_dcache_area_poc() was equivalent to
__dma_clean_range(). The difference was __dma_clean_range() uses the end
address, but __clean_dcache_area_poc() uses the size to clean.
Thus, __clean_dcache_area_poc() has been revised with a fallthrough
function of __dma_clean_range() after the change that __dma_* routines
use start and size instead of using start and end.
As a consequence of using start and size, the name of __dma_* routines
has also been altered following the terminology below:
area: takes a start and size
range: takes a start and end
Cc: Russell King - ARM Linux <linux at armlinux.org.uk>
Cc: Will Deacon <will.deacon at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Reviewed-by: Robin Murphy <robin.murphy at arm.com>
Signed-off-by: Kwangwoo Lee <kwangwoo.lee at sk.com>
---
v4)
add Reviewed-by: and Cc: lines
v3)
clean up in __dma_clean_area() based on 823066d9edcd dcache_by_line_op fix
v2)
change the names of __dma_* rountines to use area instead of range
fix to use __dma_flush_area() in dma-mapping.c
v1)
change __dma_* routines to use start, size
add __clean_dcache_area_poc() as a fallthrough of __dma_clean_range()
arch/arm64/include/asm/cacheflush.h | 3 +-
arch/arm64/mm/cache.S | 82 ++++++++++++++++++-------------------
arch/arm64/mm/dma-mapping.c | 6 +--
3 files changed, 44 insertions(+), 47 deletions(-)
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index c64268d..2e5fb97 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -68,6 +68,7 @@
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
extern void flush_icache_range(unsigned long start, unsigned long end);
extern void __flush_dcache_area(void *addr, size_t len);
+extern void __clean_dcache_area_poc(void *addr, size_t len);
extern void __clean_dcache_area_pou(void *addr, size_t len);
extern long __flush_cache_user_range(unsigned long start, unsigned long end);
@@ -85,7 +86,7 @@ static inline void flush_cache_page(struct vm_area_struct *vma,
*/
extern void __dma_map_area(const void *, size_t, int);
extern void __dma_unmap_area(const void *, size_t, int);
-extern void __dma_flush_range(const void *, const void *);
+extern void __dma_flush_area(const void *, size_t);
/*
* Copy user data from/to a page which is mapped into a different
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
index 07d7352..58b5a90 100644
--- a/arch/arm64/mm/cache.S
+++ b/arch/arm64/mm/cache.S
@@ -105,19 +105,20 @@ ENTRY(__clean_dcache_area_pou)
ENDPROC(__clean_dcache_area_pou)
/*
- * __inval_cache_range(start, end)
- * - start - start address of region
- * - end - end address of region
+ * __dma_inv_area(start, size)
+ * - start - virtual start address of region
+ * - size - size in question
*/
-ENTRY(__inval_cache_range)
+__dma_inv_area:
+ add x1, x1, x0
/* FALLTHROUGH */
/*
- * __dma_inv_range(start, end)
- * - start - virtual start address of region
- * - end - virtual end address of region
+ * __inval_cache_range(start, end)
+ * - start - start address of region
+ * - end - end address of region
*/
-__dma_inv_range:
+ENTRY(__inval_cache_range)
dcache_line_size x2, x3
sub x3, x2, #1
tst x1, x3 // end cache line aligned?
@@ -136,46 +137,43 @@ __dma_inv_range:
dsb sy
ret
ENDPIPROC(__inval_cache_range)
-ENDPROC(__dma_inv_range)
+ENDPROC(__dma_inv_area)
+
+/*
+ * __clean_dcache_area_poc(kaddr, size)
+ *
+ * Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
+ * are cleaned to the PoC.
+ *
+ * - kaddr - kernel address
+ * - size - size in question
+ */
+ENTRY(__clean_dcache_area_poc)
+ /* FALLTHROUGH */
/*
- * __dma_clean_range(start, end)
+ * __dma_clean_area(start, size)
* - start - virtual start address of region
- * - end - virtual end address of region
+ * - size - size in question
*/
-__dma_clean_range:
- dcache_line_size x2, x3
- sub x3, x2, #1
- bic x0, x0, x3
-1:
-alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE
- dc cvac, x0
-alternative_else
- dc civac, x0
-alternative_endif
- add x0, x0, x2
- cmp x0, x1
- b.lo 1b
- dsb sy
+__dma_clean_area:
+ dcache_by_line_op cvac, sy, x0, x1, x2, x3
ret
-ENDPROC(__dma_clean_range)
+ENDPIPROC(__clean_dcache_area_poc)
+ENDPROC(__dma_clean_area)
/*
- * __dma_flush_range(start, end)
+ * __dma_flush_area(start, size)
+ *
+ * clean & invalidate D / U line
+ *
* - start - virtual start address of region
- * - end - virtual end address of region
+ * - size - size in question
*/
-ENTRY(__dma_flush_range)
- dcache_line_size x2, x3
- sub x3, x2, #1
- bic x0, x0, x3
-1: dc civac, x0 // clean & invalidate D / U line
- add x0, x0, x2
- cmp x0, x1
- b.lo 1b
- dsb sy
+ENTRY(__dma_flush_area)
+ dcache_by_line_op civac, sy, x0, x1, x2, x3
ret
-ENDPIPROC(__dma_flush_range)
+ENDPIPROC(__dma_flush_area)
/*
* __dma_map_area(start, size, dir)
@@ -184,10 +182,9 @@ ENDPIPROC(__dma_flush_range)
* - dir - DMA direction
*/
ENTRY(__dma_map_area)
- add x1, x1, x0
cmp w2, #DMA_FROM_DEVICE
- b.eq __dma_inv_range
- b __dma_clean_range
+ b.eq __dma_inv_area
+ b __dma_clean_area
ENDPIPROC(__dma_map_area)
/*
@@ -197,8 +194,7 @@ ENDPIPROC(__dma_map_area)
* - dir - DMA direction
*/
ENTRY(__dma_unmap_area)
- add x1, x1, x0
cmp w2, #DMA_TO_DEVICE
- b.ne __dma_inv_range
+ b.ne __dma_inv_area
ret
ENDPIPROC(__dma_unmap_area)
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index f6c55af..88922e8 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -168,7 +168,7 @@ static void *__dma_alloc(struct device *dev, size_t size,
return ptr;
/* remove any dirty cache lines on the kernel alias */
- __dma_flush_range(ptr, ptr + size);
+ __dma_flush_area(ptr, size);
/* create a coherent mapping */
page = virt_to_page(ptr);
@@ -387,7 +387,7 @@ static int __init atomic_pool_init(void)
void *page_addr = page_address(page);
memset(page_addr, 0, atomic_pool_size);
- __dma_flush_range(page_addr, page_addr + atomic_pool_size);
+ __dma_flush_area(page_addr, atomic_pool_size);
atomic_pool = gen_pool_create(PAGE_SHIFT, -1);
if (!atomic_pool)
@@ -548,7 +548,7 @@ fs_initcall(dma_debug_do_init);
/* Thankfully, all cache ops are by VA so we can ignore phys here */
static void flush_page(struct device *dev, const void *virt, phys_addr_t phys)
{
- __dma_flush_range(virt, virt + PAGE_SIZE);
+ __dma_flush_area(virt, PAGE_SIZE);
}
static void *__iommu_alloc_attrs(struct device *dev, size_t size,
--
2.5.0
More information about the linux-arm-kernel
mailing list