[PATCH 1/1] ARM: mach-imx: pm-imx6: add missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul

[Peter Chen]

>
>On Tue, Aug 9, 2016 at 5:24 AM, Peter Chen <peter.chen at nxp.com> wrote:
>> There is a missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul,
>> without it, the "standby" mode can't work well, the system can't be
>> resumed.
>>
>> With this commit, the "standby" mode works well.
>
>Have you tested 'echo mem > /sys/power/state' as well?
>
>On my tests it does a reboot rather than going to suspend.
>

It is another issue, current both 6sx and 6ul can't work for mem mode.
But I just can't wake up system, reboot is not observed.

Peter