[RFC PATCH v5 3/3] net: phy: Add gmiitorgmii converter support

Kedareswara rao Appana appana.durga.rao at xilinx.com
Tue Aug 9 02:34:43 PDT 2016


This patch adds support for gmiitorgmii converter.

The GMII to RGMII IP core provides the Reduced Gigabit Media
Independent Interface (RGMII) between Ethernet physical media
Devices and the Gigabit Ethernet controller. This core can
Switch dynamically between the three different speed modes of
Operation by configuring the converter register through mdio write.

MDIO interface is used to set operating speed of Ethernet MAC.

This converter sits between the MAC and the external phy
MAC <==> GMII2RGMII <==> RGMII_PHY

Signed-off-by: Kedareswara rao Appana <appanad at xilinx.com>
---
Thanks a lot Andrew for your inputs.
Changes for v5:
--> Fixed return values in the probe as suggested by punnaiah.
--> Added a mask for the converter speed as suggested by punnaiah.
Changes for v4:
--> Updated phydev speed for all 3 speeds as suggested by zhuyj.
Changes for v3:
--> Updated the driver as suggested by Andrew.
Changes for v2:
--> Passed struct xphy pointer directly to the fix_mac_speed
API as suggested by the Florian.
--> Added checks for the phy-node fail case as suggested
by the Florian

 drivers/net/phy/Kconfig             |   8 +++
 drivers/net/phy/Makefile            |   1 +
 drivers/net/phy/xilinx_gmii2rgmii.c | 121 ++++++++++++++++++++++++++++++++++++
 3 files changed, 130 insertions(+)
 create mode 100644 drivers/net/phy/xilinx_gmii2rgmii.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1b534ea..c79f347 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -312,6 +312,14 @@ config MICROSEMI_PHY
     ---help---
       Currently supports the VSC8531 and VSC8541 PHYs
 
+config XILINX_GMII2RGMII
+       tristate "Xilinx GMII2RGMII converter driver"
+       default y
+       ---help---
+         This driver support xilinx GMII to RGMII IP core it provides
+         the Reduced Gigabit Media Independent Interface(RGMII) between
+         Ethernet physical media devices and the Gigabit Ethernet controller.
+
 endif # PHYLIB
 
 config MICREL_KS8995MA
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index a713bd4..73d65ce 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -50,3 +50,4 @@ obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o
 obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o
 obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o
 obj-$(CONFIG_MDIO_XGENE)	+= mdio-xgene.o
+obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
new file mode 100644
index 0000000..1456e27
--- /dev/null
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -0,0 +1,121 @@
+/* Xilinx GMII2RGMII Converter driver
+ *
+ * Copyright (C) 2016 Xilinx, Inc.
+ *
+ * Author: Kedareswara rao Appana <appanad at xilinx.com>
+ *
+ * Description:
+ * This driver is developed for Xilinx GMII2RGMII Converter
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+#include <linux/of_mdio.h>
+
+#define XILINX_GMII2RGMII_REG		0x10
+#define XILINX_GMII2RGMII_SPEED_MASK	0x2040
+
+struct gmii2rgmii {
+	struct phy_device *phy_dev;
+	struct phy_driver *phy_drv;
+	struct phy_driver conv_phy_drv;
+	int addr;
+};
+
+static int xgmiitorgmii_read_status(struct phy_device *phydev)
+{
+	struct gmii2rgmii *priv = (struct gmii2rgmii *)phydev->priv;
+	u16 val = 0;
+
+	priv->phy_drv->read_status(phydev);
+
+	val = mdiobus_read(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG);
+	val &= XILINX_GMII2RGMII_SPEED_MASK;
+
+	switch (phydev->speed) {
+	case SPEED_1000:
+		val |= BMCR_SPEED1000;
+	case SPEED_100:
+		val |= BMCR_SPEED100;
+	case SPEED_10:
+		val |= BMCR_SPEED10;
+	}
+
+	mdiobus_write(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG, val);
+
+	return 0;
+}
+
+int xgmiitorgmii_probe(struct mdio_device *mdiodev)
+{
+	struct device *dev = &mdiodev->dev;
+	struct device_node *np = dev->of_node, *phy_node;
+	struct gmii2rgmii *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phy_node = of_parse_phandle(np, "phy-handle", 0);
+	if (IS_ERR(phy_node)) {
+		dev_err(dev, "Couldn't parse phy-handle\n");
+		return -ENODEV;
+	}
+
+	priv->phy_dev = of_phy_find_device(phy_node);
+	if (!priv->phy_dev) {
+		dev_info(dev, "Couldn't find phydev\n");
+		return -EPROBE_DEFER;
+	}
+
+	priv->addr = mdiodev->addr;
+	priv->phy_drv = priv->phy_dev->drv;
+	memcpy(&priv->conv_phy_drv, priv->phy_dev->drv,
+	       sizeof(struct phy_driver));
+	priv->conv_phy_drv.read_status = xgmiitorgmii_read_status;
+	priv->phy_dev->priv = priv;
+	priv->phy_dev->drv = &priv->conv_phy_drv;
+
+	return 0;
+}
+
+static const struct of_device_id xgmiitorgmii_of_match[] = {
+	{ .compatible = "xlnx,gmii-to-rgmii-1.0" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xgmiitorgmii_of_match);
+
+static struct mdio_driver xgmiitorgmii_driver = {
+	.probe	= xgmiitorgmii_probe,
+	.mdiodrv.driver = {
+		.name = "xgmiitorgmii",
+		.of_match_table = xgmiitorgmii_of_match,
+	},
+};
+
+static int __init xgmiitorgmii_init(void)
+{
+	return mdio_driver_register(&xgmiitorgmii_driver);
+}
+module_init(xgmiitorgmii_init);
+
+static void __exit xgmiitorgmii_cleanup(void)
+{
+	mdio_driver_unregister(&xgmiitorgmii_driver);
+}
+module_exit(xgmiitorgmii_cleanup);
+
+MODULE_DESCRIPTION("Xilinx GMII2RGMII converter driver");
+MODULE_LICENSE("GPL");
-- 
2.1.2




More information about the linux-arm-kernel mailing list