[PATCH V5, 0/5] Add MediaTek USB3 DRD Driver
Chunfeng Yun
chunfeng.yun at mediatek.com
Tue Aug 9 01:23:13 PDT 2016
These patches introduce the MediaTek USB3 dual-role controller
driver.
The driver can be configured as Dual-Role Device (DRD),
Peripheral Only and Host Only (xHCI) modes. It works well
with Mass Storage, RNDIS and g_zero on FS/HS and SS. And it is
tested on MT8173 platform which only contains USB2.0 device IP,
and on MT6290 platform which contains USB3.0 device IP.
Change in v5:
1. modify some comments
2. rename some unsuitable variables
3. add reg-names property for host node
4. add USB_MTU3_DEBUG to control debug messages
Change in v4:
1. fix build errors on non-mediatek platforms
2. provide manual dual-role switch via debugfs instead of sysfs
Change in v3:
1. fix some typo error
2. rename mtu3.txt to mt8173-mtu3.txt
Change in v2:
1. modify binding docs according to suggestions
2. modify some comments and remove some dummy blank lines
3. fix memory leakage
Chunfeng Yun (5):
dt-bindings: mt8173-xhci: support host side of dual-role mode
dt-bindings: mt8173-mtu3: add devicetree bindings
usb: xhci-mtk: make IPPC register optional
usb: Add MediaTek USB3 DRD Driver
arm64: dts: mediatek: add USB3 DRD driver
.../devicetree/bindings/usb/mt8173-mtu3.txt | 87 ++
.../devicetree/bindings/usb/mt8173-xhci.txt | 54 +-
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 46 +-
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 29 +-
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 1 +
drivers/usb/host/xhci-mtk.c | 36 +-
drivers/usb/mtu3/Kconfig | 54 ++
drivers/usb/mtu3/Makefile | 19 +
drivers/usb/mtu3/mtu3.h | 422 ++++++++++
drivers/usb/mtu3/mtu3_core.c | 874 +++++++++++++++++++
drivers/usb/mtu3/mtu3_dr.c | 375 +++++++++
drivers/usb/mtu3/mtu3_dr.h | 108 +++
drivers/usb/mtu3/mtu3_gadget.c | 731 ++++++++++++++++
drivers/usb/mtu3/mtu3_gadget_ep0.c | 879 ++++++++++++++++++++
drivers/usb/mtu3/mtu3_host.c | 294 +++++++
drivers/usb/mtu3/mtu3_hw_regs.h | 473 +++++++++++
drivers/usb/mtu3/mtu3_plat.c | 490 +++++++++++
drivers/usb/mtu3/mtu3_qmu.c | 599 +++++++++++++
drivers/usb/mtu3/mtu3_qmu.h | 43 +
20 files changed, 5598 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
create mode 100644 drivers/usb/mtu3/Kconfig
create mode 100644 drivers/usb/mtu3/Makefile
create mode 100644 drivers/usb/mtu3/mtu3.h
create mode 100644 drivers/usb/mtu3/mtu3_core.c
create mode 100644 drivers/usb/mtu3/mtu3_dr.c
create mode 100644 drivers/usb/mtu3/mtu3_dr.h
create mode 100644 drivers/usb/mtu3/mtu3_gadget.c
create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c
create mode 100644 drivers/usb/mtu3/mtu3_host.c
create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h
create mode 100644 drivers/usb/mtu3/mtu3_plat.c
create mode 100644 drivers/usb/mtu3/mtu3_qmu.c
create mode 100644 drivers/usb/mtu3/mtu3_qmu.h
--
1.7.9.5
More information about the linux-arm-kernel
mailing list