[PATCH 3/4] ARM: dts: add EBI2 to the Qualcomm MSM8660 DTSI

Linus Walleij linus.walleij at linaro.org
Mon Aug 8 14:24:04 PDT 2016


This adds the external bus interface EBI2 to the MSM8660 device
tree, albeit with status = "disabled" so that devices actually
using EBI2 can turn it on if needed.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/boot/dts/qcom-msm8660.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 8c65e0d82559..e1cbc9d2f3f3 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -141,6 +141,18 @@
 			};
 		};
 
+		ebi2 at 1a100000 {
+			compatible = "qcom,ebi2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+			reg-names = "ebi2", "xmem";
+			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+			clock-names = "ebi2x", "ebi2";
+			status = "disabled";
+		};
+
 		qcom,ssbi at 500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
-- 
2.7.4




More information about the linux-arm-kernel mailing list