[Patch v3 10/11] driver/edac/layerscape_edac: Add Layerscape EDAC support

[york sun]

On 08/08/2016 11:07 AM, Marc Zyngier wrote:
> On Thu, 4 Aug 2016 15:58:35 -0700
> York Sun <york.sun at nxp.com> wrote:
>
>> Add DDR EDAC for ARM-based compatible controllers. Both big-endian
>> and little-endian are supported.
>>
>> Signed-off-by: York Sun <york.sun at nxp.com>
>>
>> ---
>> Change log
>>   v3: no change
>>   v2: Create new driver using shared DDR object
>>
>>  arch/arm64/Kconfig.platforms           |  1 +
>>  arch/{arm => arm64}/include/asm/edac.h | 21 +++++------
>>  arch/arm64/include/asm/irq.h           |  4 ++
>>  drivers/edac/Kconfig                   |  7 ++++
>>  drivers/edac/Makefile                  |  3 ++
>>  drivers/edac/fsl_ddr_edac.c            |  1 +
>>  drivers/edac/layerscape_edac.c         | 67 ++++++++++++++++++++++++++++++++++
>>  7 files changed, 92 insertions(+), 12 deletions(-)
>>  copy arch/{arm => arm64}/include/asm/edac.h (79%)
>>  create mode 100644 drivers/edac/layerscape_edac.c
>>
>> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
>> index 7ef1d05..185a215 100644
>> --- a/arch/arm64/Kconfig.platforms
>> +++ b/arch/arm64/Kconfig.platforms
>> @@ -41,6 +41,7 @@ config ARCH_EXYNOS
>>
>>  config ARCH_LAYERSCAPE
>>  	bool "ARMv8 based Freescale Layerscape SoC family"
>> +	select EDAC_SUPPORT
>>  	help
>>  	  This enables support for the Freescale Layerscape SoC family.
>>
>> diff --git a/arch/arm/include/asm/edac.h b/arch/arm64/include/asm/edac.h
>> similarity index 79%
>> copy from arch/arm/include/asm/edac.h
>> copy to arch/arm64/include/asm/edac.h
>> index 5189fa8..36a226c 100644
>> --- a/arch/arm/include/asm/edac.h
>> +++ b/arch/arm64/include/asm/edac.h
>> @@ -18,16 +18,15 @@
>>  #define ASM_EDAC_H
>>  /*
>>   * ECC atomic, DMA, SMP and interrupt safe scrub function.
>> - * Implements the per arch edac_atomic_scrub() that EDAC use for software
>> + * Implements the per arch atomic_scrub() that EDAC use for software
>>   * ECC scrubbing.  It reads memory and then writes back the original
>>   * value, allowing the hardware to detect and correct memory errors.
>>   */
>> -
>> -static inline void edac_atomic_scrub(void *va, u32 size)
>> +static inline void atomic_scrub(void *va, u32 size)
>>  {
>> -#if __LINUX_ARM_ARCH__ >= 6
>> -	unsigned int *virt_addr = va;
>> -	unsigned int temp, temp2;
>> +	unsigned long *virt_addr = va;
>> +	unsigned long temp;
>> +	unsigned int temp2;
>>  	unsigned int i;
>>
>>  	for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
>> @@ -35,15 +34,13 @@ static inline void edac_atomic_scrub(void *va, u32 size)
>>  		 * so we are interrupt, DMA and SMP safe.
>>  		 */
>>  		__asm__ __volatile__("\n"
>> -			"1:	ldrex	%0, [%2]\n"
>> -			"	strex	%1, %0, [%2]\n"
>> -			"	teq	%1, #0\n"
>> -			"	bne	1b\n"
>> +			"1:	ldxr	%0, [%2]\n"
>> +			"	stxr	%w1, %0, [%2]\n"
>> +			"	cbnz	%w1, 1b\n"
>
> Hiding architecture code in a driver, are we? Hmmm.

This adds atomic_scrub() for arm64. Arm already has this function. Are 
you suggesting to separate this part as an individual patch?
>
> Also, how can this be safe if you have non cache-coherent DMA going on?

I am clueless on this topic. What's your suggestion.

>
>>  			: "=&r"(temp), "=&r"(temp2)
>>  			: "r"(virt_addr)
>> -			: "cc");
>> +			: "memory");
>>  	}
>> -#endif
>>  }
>>
>>  #endif
>> diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
>> index b77197d..d09c008 100644
>> --- a/arch/arm64/include/asm/irq.h
>> +++ b/arch/arm64/include/asm/irq.h
>> @@ -11,6 +11,10 @@
>>  #include <asm-generic/irq.h>
>>  #include <asm/thread_info.h>
>>
>> +#ifndef NO_IRQ
>> +#define NO_IRQ	((unsigned int)(-1))
>> +#endif
>
> NAK.
>
> NO_IRQ shouldn't exist at all, and if it had to exist, it would have
> the value 0. This really is a leftover of a distant past that has no
> real relevance on recent architectures.
>

OK. I will drop the NO_IRQ in the driver.

York