[PATCH 0/2] arm64: marvell: add support for the slave CP in Armada 8K

Gregory CLEMENT gregory.clement at free-electrons.com
Mon Aug 8 08:30:07 PDT 2016


Hi Thomas,
 
 On Thu, Jul 28 2016, Thomas Petazzoni <thomas.petazzoni at free-electrons.com> wrote:

> Hello,
>
> The following set of two patches add support for the slave CP HW block
> found in the Armada 8K SoCs. As a reminder:
>
>  - Armada 7K is an SoC with one AP and one CP. The AP is the part that
>    contains the CPU, cache and a few basic I/Os. The CP is the part
>    that contains most interesting I/Os (PCIe, SATA, USB, Ethernet,
>    etc.)
>
>  - Armada 8K is an SoC with one AP and two CPs.
>
> This set of patches add support for the second CP found in Armada 8K,
> also called the "slave CP110".

Both patches applied on mvebu/dt64

Thanks,

Gregory

>
> Thanks,
>
> Thomas
>
> Thomas Petazzoni (2):
>   arm64: dts: marvell: add description for the slave CP110 in Armada 8K
>   arm64: dts: marvell: add description for the Armada 8040 dev board
>
>  arch/arm64/boot/dts/marvell/Makefile               |   1 +
>  arch/arm64/boot/dts/marvell/armada-8020.dtsi       |   1 +
>  .../{armada-8020.dtsi => armada-8040-db.dts}       | 109 ++++++++-
>  arch/arm64/boot/dts/marvell/armada-8040.dtsi       |   1 +
>  .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 246 +++++++++++++++++++++
>  5 files changed, 351 insertions(+), 7 deletions(-)
>  copy arch/arm64/boot/dts/marvell/{armada-8020.dtsi => armada-8040-db.dts} (55%)
>  create mode 100644 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
>
> -- 
> 2.7.4
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com



More information about the linux-arm-kernel mailing list