[PATCH v2 00/17] ARM: mvebu: misc Armada 38x/39x DT and v7 defconfig improvements
gregory.clement at free-electrons.com
Mon Aug 8 08:03:34 PDT 2016
On Thu, Aug 04 2016, Grzegorz Jaszczyk <jaz at semihalf.com> wrote:
> This is the second version of patch-set which enables some commonly used
> features in mvebu_v7_defconfig and updates old or introduces new dts/dtsi
> related to Armada 38x and Armada 39x SoC family. All comments from
> v1 are included, more details in a changelog below.
> Any comments or remarks would be welcome.
All the patches are applied on the mvbeu branches:
The first 2 on mvebu/defconfig and all the other on mvebu/dt
> Best regards,
> v1 -> v2
> - Add at least one line of commit log entry for those patches, which
> contained only commit title.
> Suggested by Andrew Lunn and Gregory Clement.
> - Drop patch "ARM: mvebu: enable E1000E in mvebu_v7_defconfig", since it
> enables PCIe card which is not a part of the SoC.
> Suggested by Russell King and Thomas Petazzoni.
> - Change dts prefixes in commit title from "ARM: mvebu: <board_name>" to
> "ARM: dts: mvebu: <board_name>"
> Suggested by Gregory Clement.
> - Add nodes describing the eeproms connected to I2C buses in
> armada-390-db.dts and armada-395-gp.dts. Also add information about
> connectors used and described in mentioned dts's.
> Suggested by Gregory Clement.
> - Improve devicetree bindings about required property for Marvell Armada 39x
> family: Armada 398 based boards should have only "marvell,armada398" and not
> Suggested by Rob Herring.
> Grzegorz Jaszczyk (17):
> ARM: mvebu: enable MTD command line partition table in
> ARM: mvebu: enable UBI and UBIFS in mvebu_v7_defconfig
> ARM: dts: mvebu: a385-db-ap: enable USB (orion-ehci) port
> ARM: dts: mvebu: a385-db-ap: add default partition description for
> ARM: dts: mvebu: armada-390: add missing compatibility string and
> ARM: dts: mvebu: armada-39x: update the SDHCI node on Armada 39x
> ARM: dts: mvebu: armada-39x: enable PMU, CA9 SoC Controller and
> Coherency fabric
> ARM: dts: mvebu: armada-39x: enable the thermal sensor in Armada-39x
> ARM: dts: mvebu: armada-39x: enable watchdog for all Armada-39x SoCs
> ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's
> ARM: dts: mvebu: armada-39x: add missing nodes describing USB2.0 and
> ARM: dts: mvebu: armada-39x: enable rtc for all Armada-39x SoCs
> ARM: dts: mvebu: armada-395: add support for the Armada 395 SoC family
> ARM: dts: mvebu: armada-398: update the dtsi about missing interfaces
> ARM: dts: mvebu: armada-398-db: enable supported usb interfaces
> ARM: dts: mvebu: armada-390-db: add support for the Armada 390 DB
> ARM: dts: mvebu: armada-395-gp: add support for the Armada 395 GP
> .../devicetree/bindings/arm/marvell/armada-39x.txt | 15 +-
> arch/arm/boot/dts/armada-385-db-ap.dts | 30 +++-
> arch/arm/boot/dts/armada-390-db.dts | 175 +++++++++++++++++++++
> arch/arm/boot/dts/armada-390.dtsi | 3 +
> arch/arm/boot/dts/armada-395-gp.dts | 163 +++++++++++++++++++
> arch/arm/boot/dts/armada-395.dtsi | 76 +++++++++
> arch/arm/boot/dts/armada-398-db.dts | 8 +
> arch/arm/boot/dts/armada-398.dtsi | 10 +-
> arch/arm/boot/dts/armada-39x.dtsi | 94 ++++++++++-
> arch/arm/configs/mvebu_v7_defconfig | 3 +
> 10 files changed, 570 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm/boot/dts/armada-390-db.dts
> create mode 100644 arch/arm/boot/dts/armada-395-gp.dts
> create mode 100644 arch/arm/boot/dts/armada-395.dtsi
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
More information about the linux-arm-kernel