[PATCH 2/3] EDAC, altera: Add Arria10 SD-MMC EDAC support

Thor Thayer tthayer at opensource.altera.com
Mon Aug 8 07:01:23 PDT 2016



On 08/08/2016 08:36 AM, Borislav Petkov wrote:
> On Tue, Aug 02, 2016 at 10:56:20AM -0500, tthayer at opensource.altera.com wrote:
>> From: Thor Thayer <tthayer at opensource.altera.com>
>>
>> Add Altera Arria10 SD-MMC FIFO memory EDAC support. The SD-MMC
>> is a dual port RAM implementation which is different than any
>> of the other peripherals and therefore requires additional code.
>>
>> Signed-off-by: Thor Thayer <tthayer at opensource.altera.com>
>> ---
>>  drivers/edac/Kconfig       |    7 ++
>>  drivers/edac/altera_edac.c |  188 +++++++++++++++++++++++++++++++++++++++++++-
>>  drivers/edac/altera_edac.h |    5 ++
>>  3 files changed, 199 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
>> index 72752f4..394cd16 100644
>> --- a/drivers/edac/Kconfig
>> +++ b/drivers/edac/Kconfig
>> @@ -426,6 +426,13 @@ config EDAC_ALTERA_QSPI
>>  	  Support for error detection and correction on the
>>  	  Altera QSPI FIFO Memory for Altera SoCs.
>>
>> +config EDAC_ALTERA_SDMMC
>> +	bool "Altera SDMMC FIFO ECC"
>> +	depends on EDAC_ALTERA=y && MMC_DW
>> +	help
>> +	  Support for error detection and correction on the
>> +	  Altera SDMMC FIFO Memory for Altera SoCs.
>> +
>>  config EDAC_SYNOPSYS
>>  	tristate "Synopsys DDR Memory Controller"
>>  	depends on EDAC_MM_EDAC && ARCH_ZYNQ
>> diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
>> index 28247f8..8b5177e 100644
>> --- a/drivers/edac/altera_edac.c
>> +++ b/drivers/edac/altera_edac.c
>> @@ -1393,6 +1393,188 @@ early_initcall(socfpga_init_qspi_ecc);
>>
>>  #endif	/* CONFIG_EDAC_ALTERA_QSPI */
>>
>> +/********************* SDMMC Device Functions **********************/
>> +
>> +#ifdef CONFIG_EDAC_ALTERA_SDMMC
>> +
>> +static const struct edac_device_prv_data a10_sdmmceccb_data;
>> +static int altr_portb_setup(struct altr_edac_device_dev *device)
>> +{
>> +	struct edac_device_ctl_info *dci;
>> +	struct altr_edac_device_dev *altdev;
>> +	char *ecc_name = "sdmmcb-ecc";
>> +	int edac_idx, rc;
>> +	struct device_node *np;
>> +	const struct edac_device_prv_data *prv = &a10_sdmmceccb_data;
>> +
>> +	rc = altr_check_ecc_deps(device);
>> +	if (rc)
>> +		return rc;
>> +
>> +	/* Create the PortB EDAC device */
>> +	edac_idx = edac_device_alloc_index();
>> +	dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name, 1,
>> +					 ecc_name, 1, 0, NULL, 0, edac_idx);
>> +	if (!dci) {
>> +		edac_printk(KERN_ERR, EDAC_DEVICE,
>> +			    "%s: Unable to allocate PortB EDAC device\n",
>> +			    ecc_name);
>> +		return -ENOMEM;
>> +	}
>> +
>> +	/* Initialize the PortB EDAC device structure from PortA structure */
>> +	altdev = dci->pvt_info;
>> +	*altdev = *device;
>> +
>> +	if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL))
>> +		return -ENOMEM;
>> +
>> +	/* Update PortB specific values */
>> +	altdev->edac_dev_name = ecc_name;
>> +	altdev->edac_idx = edac_idx;
>> +	altdev->edac_dev = dci;
>> +	altdev->data = prv;
>> +	dci->dev = &altdev->ddev;
>> +	dci->ctl_name = "Altera ECC Manager";
>> +	dci->mod_name = ecc_name;
>> +	dci->dev_name = ecc_name;
>> +
>> +	/* Find the SD/MMC device tree Node then update the IRQs for PortB */
>> +	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
>
> So why aren't you doing this thing first in the function so that...
>
>> +	if (!np) {
>> +		rc = -ENODEV;
>> +		goto err_release_group_1;
>
> ... you can save yourself the unwind work in err_release_group_1?
>
> In general, make sure you're doing all the work of poking at the
> hardware so that you make sure you have the right resources *before* you
> go and allocate and init stuff here.
>
> Should make the error paths simpler and the function body smaller.
>

Argh. Missed that. The rest of the IRQ queries require the DCI 
allocation so the functions below will need to unwind but yes, the 
of_find_compatible_node should move. Thanks!

>> +	}
>> +
>> +	altdev->sb_irq = irq_of_parse_and_map(np, 2);
>> +	if (!altdev->sb_irq) {
>> +		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
>> +		rc = -ENODEV;
>> +		goto err_release_group_1;
>> +	}
>> +	rc = devm_request_irq(&altdev->ddev, altdev->sb_irq,
>> +			      prv->ecc_irq_handler,
>> +			      IRQF_SHARED, ecc_name, altdev);
>> +	if (rc) {
>> +		edac_printk(KERN_ERR, EDAC_DEVICE, "PortB SBERR IRQ error\n");
>> +		goto err_release_group_1;
>> +	}
>> +
>> +	altdev->db_irq = irq_of_parse_and_map(np, 3);
>> +	if (!altdev->db_irq) {
>> +		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
>> +		rc = -ENODEV;
>> +		goto err_release_group_1;
>> +	}
>> +	rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
>> +			      prv->ecc_irq_handler,
>> +			      IRQF_SHARED, ecc_name, altdev);
>> +	if (rc) {
>> +		edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
>> +		goto err_release_group_1;
>> +	}
>> +
>> +	rc = edac_device_add_device(dci);
>> +	if (rc) {
>> +		edac_printk(KERN_ERR, EDAC_DEVICE,
>> +			    "edac_device_add_device portB failed\n");
>> +		rc = -ENOMEM;
>> +		goto err_release_group_1;
>> +	}
>> +	altr_create_edacdev_dbgfs(dci, prv);
>> +
>> +	list_add(&altdev->next, &altdev->edac->a10_ecc_devices);
>> +
>> +	devres_remove_group(&altdev->ddev, altr_portb_setup);
>> +
>> +	return 0;
>> +
>> +err_release_group_1:
>> +	edac_device_free_ctl_info(dci);
>> +	devres_release_group(&altdev->ddev, altr_portb_setup);
>> +	edac_printk(KERN_ERR, EDAC_DEVICE,
>> +		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
>> +	return rc;
>> +}
>> +
>> +static irqreturn_t  altr_edac_a10_ecc_irq_portb(int irq, void *dev_id)
>> +{
>> +	struct altr_edac_device_dev *ad = dev_id;
>> +	void __iomem  *base = ad->base;
>> +	const struct edac_device_prv_data *priv = ad->data;
>> +
>> +	if (irq == ad->sb_irq) {
>> +		writel(priv->ce_clear_mask,
>> +		       base + ALTR_A10_ECC_INTSTAT_OFST);
>> +		edac_device_handle_ce(ad->edac_dev, 0, 0, ad->edac_dev_name);
>> +		return IRQ_HANDLED;
>> +	} else if (irq == ad->db_irq) {
>> +		writel(priv->ue_clear_mask,
>> +		       base + ALTR_A10_ECC_INTSTAT_OFST);
>> +		edac_device_handle_ue(ad->edac_dev, 0, 0, ad->edac_dev_name);
>> +		return IRQ_HANDLED;
>> +	}
>> +
>> +	WARN_ON(1);
>
> WARN(1, "Strange IRQ%d on Port B...
>
> or something like that which is more informative.
>

Yes, Good point, I will fix this.

>> +
>> +	return IRQ_NONE;
>> +}
>> +
>> +static const struct edac_device_prv_data a10_sdmmcecca_data = {
>> +	.setup = altr_portb_setup,
>> +	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
>> +	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
>> +	.dbgfs_name = "altr_trigger",
>> +	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
>> +	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
>> +	.ce_set_mask = ALTR_A10_ECC_SERRPENA,
>> +	.ue_set_mask = ALTR_A10_ECC_DERRPENA,
>> +	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
>> +	.ecc_irq_handler = altr_edac_a10_ecc_irq,
>> +	.inject_fops = &altr_edac_a10_device_inject_fops,
>> +};
>> +
>> +static const struct edac_device_prv_data a10_sdmmceccb_data = {
>> +	.setup = altr_portb_setup,
>> +	.ce_clear_mask = ALTR_A10_ECC_SERRPENB,
>> +	.ue_clear_mask = ALTR_A10_ECC_DERRPENB,
>> +	.dbgfs_name = "altr_trigger",
>> +	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
>> +	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
>> +	.ce_set_mask = ALTR_A10_ECC_TSERRB,
>> +	.ue_set_mask = ALTR_A10_ECC_TDERRB,
>> +	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
>> +	.ecc_irq_handler = altr_edac_a10_ecc_irq_portb,
>> +	.inject_fops = &altr_edac_a10_device_inject_fops,
>> +};
>> +
>> +static int __init socfpga_init_sdmmc_ecc(void)
>> +{
>> +	int rc = -ENODEV;
>> +	struct device_node *child = of_find_compatible_node(NULL, NULL,
>> +						"altr,socfpga-sdmmc-ecc");
>> +	if (!child) {
>> +		edac_printk(KERN_ERR, EDAC_DEVICE, "SDMMC node not found\n");
>
> Are you sure you want to issue this error each time the driver loads? Is
> that even an error condition?
>
I see your point. I will change this to a KERN_WARNING so there is some 
indication why the SDMMC wasn't initialized if SDMMC is enabled in Kconfig.

I will make the changes and re-submit. Thanks for reviewing!

>> +		return -ENODEV;
>> +	}
>> +
>> +	if (!of_device_is_available(child))
>> +		goto exit;
>> +
>> +	if (validate_parent_available(child))
>> +		goto exit;
>> +
>> +	rc = altr_init_a10_ecc_block(child, ALTR_A10_SDMMC_IRQ_MASK,
>> +				     a10_sdmmcecca_data.ecc_enable_mask, 1);
>> +exit:
>> +	of_node_put(child);
>> +	return rc;
>> +}
>> +
>> +early_initcall(socfpga_init_sdmmc_ecc);
>> +
>> +#endif	/* CONFIG_EDAC_ALTERA_SDMMC */
>> +
>>  /********************* Arria10 EDAC Device Functions *************************/
>>  static const struct of_device_id altr_edac_a10_device_of_match[] = {
>>  #ifdef CONFIG_EDAC_ALTERA_L2C



More information about the linux-arm-kernel mailing list