[PATCH 0/6] Add support for Tegra GMI bus controller
Mirza Krak
mirza.krak at gmail.com
Sat Aug 6 12:40:46 PDT 2016
From: Mirza Krak <mirza.krak at gmail.com>
Hi.
This is a follow up to my previous RFC. Take a look at [1], [2] and [3] for
previous discussions.
I have tested this series on a Tegra30 using a Colibri T30 SOM on a custom
carrier board which has multiple CAN controllers (SJA1000) connected to the
GMI bus.
[1]. https://marc.info/?l=linux-clk&m=146893557629903&w=2
[2]. https://marc.info/?l=linux-tegra&m=146893541829801&w=2
[3]. https://marc.info/?l=linux-tegra&m=146893542429814&w=2
Mirza Krak (6):
clk: tegra: add TEGRA20_CLK_NOR to init table
clk: tegra: add TEGRA30_CLK_NOR to init table
dt/bindings: Add bindings for Tegra GMI controller
ARM: tegra: Add Tegra30 GMI support
ARM: tegra: Add Tegra20 GMI support
bus: Add support for Tegra Generic Memory Interface
.../devicetree/bindings/bus/nvidia,tegra20-gmi.txt | 99 +++++++++
arch/arm/boot/dts/tegra20.dtsi | 11 +
arch/arm/boot/dts/tegra30.dtsi | 10 +
drivers/bus/Kconfig | 7 +
drivers/bus/Makefile | 1 +
drivers/bus/tegra-gmi.c | 224 +++++++++++++++++++++
drivers/clk/tegra/clk-tegra20.c | 1 +
drivers/clk/tegra/clk-tegra30.c | 1 +
8 files changed, 354 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
create mode 100644 drivers/bus/tegra-gmi.c
--
2.1.4
More information about the linux-arm-kernel
mailing list