[PATCH v3] input: touchscreen: Remove duplicate ft6236 driver
Noralf Trønnes
noralf at tronnes.org
Sat Aug 6 05:43:21 PDT 2016
Den 06.08.2016 12:00, skrev Hans de Goede:
> Hi,
>
> On 06-08-16 04:22, Dmitry Torokhov wrote:
>> On Fri, Aug 05, 2016 at 05:07:20PM +0200, Stefan Wahren wrote:
>>> Hi Hans,
>>>
>>> Am 05.08.2016 um 09:24 schrieb Hans de Goede:
>>>> The new(ish) ft6236 simply re-implements the M09 protocol of the
>>>> (much) older edt-ft5x06.c driver.
>>>>
>>>> This commit removes this duplicate driver and adds the i2c ids and
>>>> dt compatible string to the edt-ft5x06.c driver to keep compatibility.
>>>
>>> i think only remove of the driver is incorrect here.
>>>
>>> Since there are two similar but still different DT bindings
>>>
>>> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
>>>
>>> Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
>>>
>>>
>>> the DT handling of edt-ft5x06.c needs to be extended and then
>>> finally driver and binding could be removed.
>>
>> I believe Hans made sure edt-ft5x06.c can handle focaltech-ft6236
>> bindings. Do you see a discrepancy?
>
> Correct I've double checked that both the i2c protocol and the
> reset gpio binding are compatible. Devices using the focaltech-ft6236.txt
> binding should work fine with the edt-ft5x06.c driver.
>
> Now if someone can test and confirm that on actual hardware that would be
> great...
>
> And we probably want to remove
> Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
> and instead add the compatible string that defines to
> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
>
> I can whip up a patch for that, but as said some testing on actual
> hw would be good, preferably before I write said patch.
>
I can confirm that this works with a ft6236.
[ 1.987092] input: EP0110M09 as
/devices/platform/soc/20804000.i2c/i2c-1/1-0038/input/input0
My display panel is broken, but the values reported by evtest looks correct.
Thanks for doing this, one less driver to care about.
Maybe you could add a reference to touchscreen.txt in edt-ft5x06.txt?
Noralf.
More information about the linux-arm-kernel
mailing list