[PATCH v3 13/15] dt/bindings: Add PSCI OS-Initiated PM Domains bindings

[Lina Iyer]

+devicetree

On Thu, Aug 04 2016 at 17:06 -0600, Lina Iyer wrote:
>Add bindings for defining a OS-Initiated based CPU PM domain.
>
>Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
>---
> Documentation/devicetree/bindings/arm/psci.txt | 64 ++++++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
>diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt
>index a2c4f1d..e1b2926 100644
>--- a/Documentation/devicetree/bindings/arm/psci.txt
>+++ b/Documentation/devicetree/bindings/arm/psci.txt
>@@ -105,7 +105,71 @@ Case 3: PSCI v0.2 and PSCI v0.1.
> 		...
> 	};
>
>+PSCI v1.0 onwards, supports OS-Initiated mode for powering off CPU domains
>+from the firmware. Such PM domains for which the PSCI firmware driver acts
>+as pseudo-controller, may also be specified in the DT along with the domain
>+idle states.
>+
>+The domain definitions must follow the domain idle state specifications per
>+[3].
>+
>+The domain idle states must be specified using the optional node -
>+
>+- domain-states
>+
>+The domain states themselves must be compatible with 'arm,idle-state' defined
>+in [1]  and need to specify the arm,psci-suspend-param property for each idle
>+state. More information on defining CPU PM domains is available in [4].
>+
>+Example: OS-Iniated PSCI based PM domains
>+
>+	cpus {
>+		#address-cells = <1>;
>+		#size-cells = <0>;
>+
>+		CPU0: cpu at 0 {
>+			device_type = "cpu";
>+			compatible = "arm,cortex-a53", "arm,armv8";
>+			reg = <0x0>;
>+			enable-method = "psci";
>+			power-domains = <&CPU_PD>;
>+		};
>+	};
>+
>+	psci {
>+		compatible = "arm,psci-1.0";
>+		method = "smc";
>+
>+		CPU_PD: cpu-pd at 0 {
>+			#power-domain-cells = <0>;
>+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWR_DWN>;
>+		};
>+
>+		domain-states {
>+			CLUSTER_RET: domain_ret {
>+				compatible = "arm,idle-state";
>+				arm,psci-suspend-param = <0x1000010>;
>+				entry-latency-us = <500>;
>+				exit-latency-us = <500>;
>+				min-residency-us = <2000>;
>+			};
>+
>+			CLUSTER_PWR_DWN: domain_gdhs {
>+				compatible = "arm,idle-state";
>+				arm,psci-suspend-param = <0x1000030>;
>+				entry-latency-us = <2000>;
>+				exit-latency-us = <2000>;
>+				min-residency-us = <6000>;
>+			};
>+		};
>+	};
>+
>+
> [1] Kernel documentation - ARM idle states bindings
>     Documentation/devicetree/bindings/arm/idle-states.txt
> [2] Power State Coordination Interface (PSCI) specification
>     http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf
>+[3]. PM Domains description
>+    Documentation/devicetree/bindings/power/power_domain.txt
>+[4]. CPU PM Domains description
>+    Documentation/power/cpu_domains.txt
>-- 
>2.7.4
>