[PATCH v2 09/10] mfd: Add STMPE1600 support

Lee Jones lee.jones at linaro.org
Thu Aug 4 08:10:10 PDT 2016


On Thu, 28 Apr 2016, patrice.chotard at st.com wrote:

> From: Patrice Chotard <patrice.chotard at st.com>
> 
> STMPE1600 is a 16-bit port expander.
> Datasheet is available here :
> http://www2.st.com/content/st_com/en/products/interfaces-and-transceivers/
> i-o-expanders-and-level-translators/i-o-expanders/stmpe1600.html
> 
> Signed-off-by: Amelie DELAUNAY <amelie.delaunay at st.com>
> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
> Acked-by: Linus Walleij <linus.walleij at linaro.org>
> ---
>  drivers/mfd/stmpe-i2c.c   |  2 ++
>  drivers/mfd/stmpe.c       | 65 +++++++++++++++++++++++++++++++++++++++++++----
>  drivers/mfd/stmpe.h       | 21 +++++++++++++++
>  include/linux/mfd/stmpe.h |  1 +
>  4 files changed, 84 insertions(+), 5 deletions(-)

If it's good enough for Linus ...

Acked-by: Lee Jones <lee.jones at linaro.org>

> diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
> index c3f4aab..863c39a 100644
> --- a/drivers/mfd/stmpe-i2c.c
> +++ b/drivers/mfd/stmpe-i2c.c
> @@ -57,6 +57,7 @@ static const struct of_device_id stmpe_of_match[] = {
>  	{ .compatible = "st,stmpe610", .data = (void *)STMPE610, },
>  	{ .compatible = "st,stmpe801", .data = (void *)STMPE801, },
>  	{ .compatible = "st,stmpe811", .data = (void *)STMPE811, },
> +	{ .compatible = "st,stmpe1600", .data = (void *)STMPE1600, },
>  	{ .compatible = "st,stmpe1601", .data = (void *)STMPE1601, },
>  	{ .compatible = "st,stmpe1801", .data = (void *)STMPE1801, },
>  	{ .compatible = "st,stmpe2401", .data = (void *)STMPE2401, },
> @@ -101,6 +102,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
>  	{ "stmpe610", STMPE610 },
>  	{ "stmpe801", STMPE801 },
>  	{ "stmpe811", STMPE811 },
> +	{ "stmpe1600", STMPE1600 },
>  	{ "stmpe1601", STMPE1601 },
>  	{ "stmpe1801", STMPE1801 },
>  	{ "stmpe2401", STMPE2401 },
> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index a060809..3a65331 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -532,6 +532,59 @@ static struct stmpe_variant_info stmpe610 = {
>  };
>  
>  /*
> + * STMPE1600
> + * Compared to all others STMPE variant, LSB and MSB regs are located in this
> + * order :	LSB   addr
> + *		MSB   addr + 1
> + * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
> + */
> +
> +static const u8 stmpe1600_regs[] = {
> +	[STMPE_IDX_CHIP_ID]	= STMPE1600_REG_CHIP_ID,
> +	[STMPE_IDX_SYS_CTRL]	= STMPE1600_REG_SYS_CTRL,
> +	[STMPE_IDX_ICR_LSB]	= STMPE1600_REG_SYS_CTRL,
> +	[STMPE_IDX_GPMR_LSB]	= STMPE1600_REG_GPMR_LSB,
> +	[STMPE_IDX_GPMR_CSB]	= STMPE1600_REG_GPMR_MSB,
> +	[STMPE_IDX_GPSR_LSB]	= STMPE1600_REG_GPSR_LSB,
> +	[STMPE_IDX_GPSR_CSB]	= STMPE1600_REG_GPSR_MSB,
> +	[STMPE_IDX_GPDR_LSB]	= STMPE1600_REG_GPDR_LSB,
> +	[STMPE_IDX_GPDR_CSB]	= STMPE1600_REG_GPDR_MSB,
> +	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1600_REG_IEGPIOR_LSB,
> +	[STMPE_IDX_IEGPIOR_CSB]	= STMPE1600_REG_IEGPIOR_MSB,
> +	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1600_REG_ISGPIOR_LSB,
> +};
> +
> +static struct stmpe_variant_block stmpe1600_blocks[] = {
> +	{
> +		.cell	= &stmpe_gpio_cell,
> +		.irq	= 0,
> +		.block	= STMPE_BLOCK_GPIO,
> +	},
> +};
> +
> +static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
> +			   bool enable)
> +{
> +	if (blocks & STMPE_BLOCK_GPIO)
> +		return 0;
> +	else
> +		return -EINVAL;
> +}
> +
> +static struct stmpe_variant_info stmpe1600 = {
> +	.name		= "stmpe1600",
> +	.id_val		= STMPE1600_ID,
> +	.id_mask	= 0xffff,
> +	.num_gpios	= 16,
> +	.af_bits	= 0,
> +	.regs		= stmpe1600_regs,
> +	.blocks		= stmpe1600_blocks,
> +	.num_blocks	= ARRAY_SIZE(stmpe1600_blocks),
> +	.num_irqs	= STMPE1600_NR_INTERNAL_IRQS,
> +	.enable		= stmpe1600_enable,
> +};
> +
> +/*
>   * STMPE1601
>   */
>  
> @@ -928,6 +981,7 @@ static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
>  	[STMPE610]	= &stmpe610,
>  	[STMPE801]	= &stmpe801,
>  	[STMPE811]	= &stmpe811,
> +	[STMPE1600]	= &stmpe1600,
>  	[STMPE1601]	= &stmpe1601,
>  	[STMPE1801]	= &stmpe1801,
>  	[STMPE2401]	= &stmpe2401,
> @@ -954,7 +1008,8 @@ static irqreturn_t stmpe_irq(int irq, void *data)
>  	int ret;
>  	int i;
>  
> -	if (variant->id_val == STMPE801_ID) {
> +	if (variant->id_val == STMPE801_ID ||
> +	    variant->id_val == STMPE1600_ID) {
>  		int base = irq_create_mapping(stmpe->domain, 0);
>  
>  		handle_nested_irq(base);
> @@ -1128,13 +1183,13 @@ static int stmpe_chip_init(struct stmpe *stmpe)
>  		return ret;
>  
>  	if (stmpe->irq >= 0) {
> -		if (id == STMPE801_ID)
> +		if (id == STMPE801_ID || id == STMPE1600_ID)
>  			icr = STMPE_SYS_CTRL_INT_EN;
>  		else
>  			icr = STMPE_ICR_LSB_GIM;
>  
> -		/* STMPE801 doesn't support Edge interrupts */
> -		if (id != STMPE801_ID) {
> +		/* STMPE801 and STMPE1600 don't support Edge interrupts */
> +		if (id != STMPE801_ID && id != STMPE1600_ID) {
>  			if (irq_trigger == IRQF_TRIGGER_FALLING ||
>  					irq_trigger == IRQF_TRIGGER_RISING)
>  				icr |= STMPE_ICR_LSB_EDGE;
> @@ -1142,7 +1197,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
>  
>  		if (irq_trigger == IRQF_TRIGGER_RISING ||
>  				irq_trigger == IRQF_TRIGGER_HIGH) {
> -			if (id == STMPE801_ID)
> +			if (id == STMPE801_ID || id == STMPE1600_ID)
>  				icr |= STMPE_SYS_CTRL_INT_HI;
>  			else
>  				icr |= STMPE_ICR_LSB_HIGH;
> diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
> index f127342..f7efdd8 100644
> --- a/drivers/mfd/stmpe.h
> +++ b/drivers/mfd/stmpe.h
> @@ -164,6 +164,27 @@ int stmpe_remove(struct stmpe *stmpe);
>  #define STMPE811_SYS_CTRL2_TS_OFF	(1 << 3)
>  
>  /*
> + * STMPE1600
> + */
> +#define STMPE1600_ID			0x0016
> +#define STMPE1600_NR_INTERNAL_IRQS	16
> +
> +#define STMPE1600_REG_CHIP_ID		0x00
> +#define STMPE1600_REG_SYS_CTRL		0x03
> +#define STMPE1600_REG_IEGPIOR_LSB	0x08
> +#define STMPE1600_REG_IEGPIOR_MSB	0x09
> +#define STMPE1600_REG_ISGPIOR_LSB	0x0A
> +#define STMPE1600_REG_ISGPIOR_MSB	0x0B
> +#define STMPE1600_REG_GPMR_LSB		0x10
> +#define STMPE1600_REG_GPMR_MSB		0x11
> +#define STMPE1600_REG_GPSR_LSB		0x12
> +#define STMPE1600_REG_GPSR_MSB		0x13
> +#define STMPE1600_REG_GPDR_LSB		0x14
> +#define STMPE1600_REG_GPDR_MSB		0x15
> +#define STMPE1600_REG_GPPIR_LSB		0x16
> +#define STMPE1600_REG_GPPIR_MSB		0x17
> +
> +/*
>   * STMPE1601
>   */
>  
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index 3dced4a..0170bd6 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -26,6 +26,7 @@ enum stmpe_partnum {
>  	STMPE610,
>  	STMPE801,
>  	STMPE811,
> +	STMPE1600,
>  	STMPE1601,
>  	STMPE1801,
>  	STMPE2401,

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list