[PATCH v3 3/3] drm/mediatek: fix the wrong pixel clock when resolution is 4K
Bibby Hsieh
bibby.hsieh at mediatek.com
Wed Aug 3 19:38:31 PDT 2016
From: Junzhi Zhao <junzhi.zhao at mediatek.com>
Pixel clock should be 297MHz when resolution is 4K.
Signed-off-by: Junzhi Zhao <junzhi.zhao at mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index d05ca79..a90af59 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -438,10 +438,14 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
}
pix_rate = 1000UL * mode->clock;
- if (mode->clock <= 74000)
+ if (mode->clock <= 27000)
+ factor = 16 * 3;
+ else if (mode->clock <= 74250)
factor = 8 * 3;
- else
+ else if (mode->clock <= 167000)
factor = 4 * 3;
+ else
+ factor = 2 * 3;
pll_rate = pix_rate * factor;
dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n",
--
1.7.9.5
More information about the linux-arm-kernel
mailing list