[PATCH v2 2/3] phy: sun4i: add support for A64 usb phy
Icenowy Zheng
icenowy at aosc.xyz
Mon Aug 1 09:34:47 PDT 2016
There's something unknown in the pmu part that shared with H3.
It's renamed as PMU_UNK1 from PMU_UNK_H3.
Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
---
Changes in v2:
- rename PMU_UNK_H3 to PMU_UNK1
- make the PMU_UNK1 a config item in cfg struct
drivers/phy/phy-sun4i-usb.c | 34 ++++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 0a45bc6..a4db658 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -49,7 +49,7 @@
#define REG_PHYCTL_A33 0x10
#define REG_PHY_UNK_H3 0x20
-#define REG_PMU_UNK_H3 0x10
+#define REG_PMU_UNK1 0x10
#define PHYCTL_DATA BIT(7)
@@ -97,6 +97,7 @@ enum sun4i_usb_phy_type {
sun6i_a31_phy,
sun8i_a33_phy,
sun8i_h3_phy,
+ sun50i_a64_phy,
};
struct sun4i_usb_phy_cfg {
@@ -105,6 +106,7 @@ struct sun4i_usb_phy_cfg {
u32 disc_thresh;
u8 phyctl_offset;
bool dedicated_clocks;
+ bool enable_pmu_unk1;
};
struct sun4i_usb_phy_data {
@@ -180,8 +182,9 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
mutex_lock(&phy_data->mutex);
- if (phy_data->cfg->type == sun8i_a33_phy) {
- /* A33 needs us to set phyctl to 0 explicitly */
+ if (phy_data->cfg->type == sun8i_a33_phy ||
+ phy_data->cfg->type == sun50i_a64_phy) {
+ /* A33 or A64 needs us to set phyctl to 0 explicitly */
writel(0, phyctl);
}
@@ -255,14 +258,16 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
+ if (data->cfg->enable_pmu_unk1) {
+ val = readl(phy->pmu + REG_PMU_UNK1);
+ writel(val & ~2, phy->pmu + REG_PMU_UNK1);
+ }
+
if (data->cfg->type == sun8i_h3_phy) {
if (phy->index == 0) {
val = readl(data->base + REG_PHY_UNK_H3);
writel(val & ~1, data->base + REG_PHY_UNK_H3);
}
-
- val = readl(phy->pmu + REG_PMU_UNK_H3);
- writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
} else {
/* Enable USB 45 Ohm resistor calibration */
if (phy->index == 0)
@@ -713,6 +718,7 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -721,6 +727,7 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -729,6 +736,7 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -737,6 +745,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -745,6 +754,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -753,6 +763,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
@@ -760,6 +771,16 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.type = sun8i_h3_phy,
.disc_thresh = 3,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
+ .num_phys = 2,
+ .type = sun50i_a64_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
};
static const struct of_device_id sun4i_usb_phy_of_match[] = {
@@ -770,6 +791,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
+ { .compatible = "allwinner,sun50i-a64-usb-phy", .data = &sun50i_a64_cfg},
{ },
};
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
--
2.9.0
More information about the linux-arm-kernel
mailing list