[PATCH 2/2] [media] ir-rx51: Fix build after multiarch changes broke it
Ivaylo Dimitrov
ivo.g.dimitrov.75 at gmail.com
Thu Apr 28 12:38:23 PDT 2016
Hi,
On 27.04.2016 02:51, Tony Lindgren wrote:
> The ir-rx51 driver for n900 has been disabled since the multiarch
> changes as plat include directory no longer is SoC specific.
>
> Let's fix it with minimal changes to pass the dmtimer calls in
> pdata. Then the following changes can be done while things can
> be tested to be working for each change:
>
> 1. Change the non-pwm dmtimer to use just hrtimer if possible
>
> 2. Change the pwm dmtimer to use Linux PWM API with the new
> drivers/pwm/pwm-omap-dmtimer.c and remove the direct calls
> to dmtimer functions
>
> 3. Parse configuration from device tree and drop the pdata
>
> Note compilation of this depends on the previous patch
> "ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51".
>
> Cc: Mauro Carvalho Chehab <mchehab at osg.samsung.com>
> Cc: Neil Armstrong <narmstrong at baylibre.com>
> Cc: linux-media at vger.kernel.org
> Signed-off-by: Tony Lindgren <tony at atomide.com>
> ---
> drivers/media/rc/Kconfig | 2 +-
> drivers/media/rc/ir-rx51.c | 99 +++++++++++++++++++++++++---------------------
> 2 files changed, 54 insertions(+), 47 deletions(-)
>
>
> Can you guys please test this still works? I've only been able
> to test that it compiles/loads/unloads as my n900 in in a rack.
>
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index bd4d685..370e16e 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -336,7 +336,7 @@ config IR_TTUSBIR
>
> config IR_RX51
> tristate "Nokia N900 IR transmitter diode"
> - depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
> + depends on OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS && LIRC
> ---help---
> Say Y or M here if you want to enable support for the IR
> transmitter diode built in the Nokia N900 (RX51) device.
> diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
> index 4e1711a..da839c3 100644
> --- a/drivers/media/rc/ir-rx51.c
> +++ b/drivers/media/rc/ir-rx51.c
> @@ -19,6 +19,7 @@
> *
> */
>
> +#include <linux/clk.h>
> #include <linux/module.h>
> #include <linux/interrupt.h>
> #include <linux/uaccess.h>
> @@ -26,11 +27,9 @@
> #include <linux/sched.h>
> #include <linux/wait.h>
>
> -#include <plat/dmtimer.h>
> -#include <plat/clock.h>
> -
> #include <media/lirc.h>
> #include <media/lirc_dev.h>
> +#include <linux/platform_data/pwm_omap_dmtimer.h>
> #include <linux/platform_data/media/ir-rx51.h>
>
> #define LIRC_RX51_DRIVER_FEATURES (LIRC_CAN_SET_SEND_DUTY_CYCLE | \
> @@ -44,8 +43,9 @@
> #define TIMER_MAX_VALUE 0xffffffff
>
> struct lirc_rx51 {
> - struct omap_dm_timer *pwm_timer;
> - struct omap_dm_timer *pulse_timer;
> + pwm_omap_dmtimer *pwm_timer;
> + pwm_omap_dmtimer *pulse_timer;
> + struct pwm_omap_dmtimer_pdata *dmtimer;
> struct device *dev;
> struct lirc_rx51_platform_data *pdata;
> wait_queue_head_t wqueue;
> @@ -63,14 +63,14 @@ struct lirc_rx51 {
>
> static void lirc_rx51_on(struct lirc_rx51 *lirc_rx51)
> {
> - omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1,
> - OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE);
> + lirc_rx51->dmtimer->set_pwm(lirc_rx51->pwm_timer, 0, 1,
> + PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE);
> }
>
> static void lirc_rx51_off(struct lirc_rx51 *lirc_rx51)
> {
> - omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1,
> - OMAP_TIMER_TRIGGER_NONE);
> + lirc_rx51->dmtimer->set_pwm(lirc_rx51->pwm_timer, 0, 1,
> + PWM_OMAP_DMTIMER_TRIGGER_NONE);
> }
>
> static int init_timing_params(struct lirc_rx51 *lirc_rx51)
> @@ -79,12 +79,12 @@ static int init_timing_params(struct lirc_rx51 *lirc_rx51)
>
> load = -(lirc_rx51->fclk_khz * 1000 / lirc_rx51->freq);
> match = -(lirc_rx51->duty_cycle * -load / 100);
> - omap_dm_timer_set_load(lirc_rx51->pwm_timer, 1, load);
> - omap_dm_timer_set_match(lirc_rx51->pwm_timer, 1, match);
> - omap_dm_timer_write_counter(lirc_rx51->pwm_timer, TIMER_MAX_VALUE - 2);
> - omap_dm_timer_start(lirc_rx51->pwm_timer);
> - omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0);
> - omap_dm_timer_start(lirc_rx51->pulse_timer);
> + lirc_rx51->dmtimer->set_load(lirc_rx51->pwm_timer, 1, load);
> + lirc_rx51->dmtimer->set_match(lirc_rx51->pwm_timer, 1, match);
> + lirc_rx51->dmtimer->write_counter(lirc_rx51->pwm_timer, TIMER_MAX_VALUE - 2);
> + lirc_rx51->dmtimer->start(lirc_rx51->pwm_timer);
> + lirc_rx51->dmtimer->set_int_enable(lirc_rx51->pulse_timer, 0);
> + lirc_rx51->dmtimer->start(lirc_rx51->pulse_timer);
>
> lirc_rx51->match = 0;
>
> @@ -100,15 +100,15 @@ static int pulse_timer_set_timeout(struct lirc_rx51 *lirc_rx51, int usec)
> BUG_ON(usec < 0);
>
> if (lirc_rx51->match == 0)
> - counter = omap_dm_timer_read_counter(lirc_rx51->pulse_timer);
> + counter = lirc_rx51->dmtimer->read_counter(lirc_rx51->pulse_timer);
> else
> counter = lirc_rx51->match;
>
> counter += (u32)(lirc_rx51->fclk_khz * usec / (1000));
> - omap_dm_timer_set_match(lirc_rx51->pulse_timer, 1, counter);
> - omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer,
> - OMAP_TIMER_INT_MATCH);
> - if (tics_after(omap_dm_timer_read_counter(lirc_rx51->pulse_timer),
> + lirc_rx51->dmtimer->set_match(lirc_rx51->pulse_timer, 1, counter);
> + lirc_rx51->dmtimer->set_int_enable(lirc_rx51->pulse_timer,
> + PWM_OMAP_DMTIMER_INT_MATCH);
> + if (tics_after(lirc_rx51->dmtimer->read_counter(lirc_rx51->pulse_timer),
> counter)) {
> return 1;
> }
> @@ -120,18 +120,18 @@ static irqreturn_t lirc_rx51_interrupt_handler(int irq, void *ptr)
> unsigned int retval;
> struct lirc_rx51 *lirc_rx51 = ptr;
>
> - retval = omap_dm_timer_read_status(lirc_rx51->pulse_timer);
> + retval = lirc_rx51->dmtimer->read_status(lirc_rx51->pulse_timer);
> if (!retval)
> return IRQ_NONE;
>
> - if (retval & ~OMAP_TIMER_INT_MATCH)
> + if (retval & ~PWM_OMAP_DMTIMER_INT_MATCH)
> dev_err_ratelimited(lirc_rx51->dev,
> ": Unexpected interrupt source: %x\n", retval);
>
> - omap_dm_timer_write_status(lirc_rx51->pulse_timer,
> - OMAP_TIMER_INT_MATCH |
> - OMAP_TIMER_INT_OVERFLOW |
> - OMAP_TIMER_INT_CAPTURE);
> + lirc_rx51->dmtimer->write_status(lirc_rx51->pulse_timer,
> + PWM_OMAP_DMTIMER_INT_MATCH |
> + PWM_OMAP_DMTIMER_INT_OVERFLOW |
> + PWM_OMAP_DMTIMER_INT_CAPTURE);
> if (lirc_rx51->wbuf_index < 0) {
> dev_err_ratelimited(lirc_rx51->dev,
> ": BUG wbuf_index has value of %i\n",
> @@ -165,9 +165,9 @@ end:
> /* Stop TX here */
> lirc_rx51_off(lirc_rx51);
> lirc_rx51->wbuf_index = -1;
> - omap_dm_timer_stop(lirc_rx51->pwm_timer);
> - omap_dm_timer_stop(lirc_rx51->pulse_timer);
> - omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0);
> + lirc_rx51->dmtimer->stop(lirc_rx51->pwm_timer);
> + lirc_rx51->dmtimer->stop(lirc_rx51->pulse_timer);
> + lirc_rx51->dmtimer->set_int_enable(lirc_rx51->pulse_timer, 0);
> wake_up_interruptible(&lirc_rx51->wqueue);
>
> return IRQ_HANDLED;
> @@ -178,28 +178,29 @@ static int lirc_rx51_init_port(struct lirc_rx51 *lirc_rx51)
> struct clk *clk_fclk;
> int retval, pwm_timer = lirc_rx51->pwm_timer_num;
>
> - lirc_rx51->pwm_timer = omap_dm_timer_request_specific(pwm_timer);
> + lirc_rx51->pwm_timer = lirc_rx51->dmtimer->request_specific(pwm_timer);
omap_dm_timer_request_specific always fails with message "Please use
omap_dm_timer_request_by_cap/node()" with DT boot.
I hacked the code to use
omap_dm_timer_request_by_cap(OMAP_TIMER_HAS_PWM) and it seems to use the
correct timer (IR LED blinks, checked with the camera of Samsung S4
mini), but it doesn't actually control either of the TV sets here. The
same SW(pierogi) controls them when device is booted to stock kernel.
However, this seems another problem not related to the patch.
> if (lirc_rx51->pwm_timer == NULL) {
> dev_err(lirc_rx51->dev, ": Error requesting GPT%d timer\n",
> pwm_timer);
> return -EBUSY;
> }
>
> - lirc_rx51->pulse_timer = omap_dm_timer_request();
> + lirc_rx51->pulse_timer = lirc_rx51->dmtimer->request();
> if (lirc_rx51->pulse_timer == NULL) {
> dev_err(lirc_rx51->dev, ": Error requesting pulse timer\n");
> retval = -EBUSY;
> goto err1;
> }
>
> - omap_dm_timer_set_source(lirc_rx51->pwm_timer, OMAP_TIMER_SRC_SYS_CLK);
> - omap_dm_timer_set_source(lirc_rx51->pulse_timer,
> - OMAP_TIMER_SRC_SYS_CLK);
> + lirc_rx51->dmtimer->set_source(lirc_rx51->pwm_timer,
> + PWM_OMAP_DMTIMER_SRC_SYS_CLK);
> + lirc_rx51->dmtimer->set_source(lirc_rx51->pulse_timer,
> + PWM_OMAP_DMTIMER_SRC_SYS_CLK);
>
> - omap_dm_timer_enable(lirc_rx51->pwm_timer);
> - omap_dm_timer_enable(lirc_rx51->pulse_timer);
> + lirc_rx51->dmtimer->enable(lirc_rx51->pwm_timer);
> + lirc_rx51->dmtimer->enable(lirc_rx51->pulse_timer);
>
> - lirc_rx51->irq_num = omap_dm_timer_get_irq(lirc_rx51->pulse_timer);
> + lirc_rx51->irq_num = lirc_rx51->dmtimer->get_irq(lirc_rx51->pulse_timer);
> retval = request_irq(lirc_rx51->irq_num, lirc_rx51_interrupt_handler,
> IRQF_SHARED, "lirc_pulse_timer", lirc_rx51);
> if (retval) {
> @@ -207,28 +208,28 @@ static int lirc_rx51_init_port(struct lirc_rx51 *lirc_rx51)
> goto err2;
> }
>
> - clk_fclk = omap_dm_timer_get_fclk(lirc_rx51->pwm_timer);
> - lirc_rx51->fclk_khz = clk_fclk->rate / 1000;
> + clk_fclk = lirc_rx51->dmtimer->get_fclk(lirc_rx51->pwm_timer);
> + lirc_rx51->fclk_khz = clk_get_rate(clk_fclk) / 1000;
>
> return 0;
>
> err2:
> - omap_dm_timer_free(lirc_rx51->pulse_timer);
> + lirc_rx51->dmtimer->free(lirc_rx51->pulse_timer);
> err1:
> - omap_dm_timer_free(lirc_rx51->pwm_timer);
> + lirc_rx51->dmtimer->free(lirc_rx51->pwm_timer);
>
> return retval;
> }
>
> static int lirc_rx51_free_port(struct lirc_rx51 *lirc_rx51)
> {
> - omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0);
> + lirc_rx51->dmtimer->set_int_enable(lirc_rx51->pulse_timer, 0);
> free_irq(lirc_rx51->irq_num, lirc_rx51);
> lirc_rx51_off(lirc_rx51);
> - omap_dm_timer_disable(lirc_rx51->pwm_timer);
> - omap_dm_timer_disable(lirc_rx51->pulse_timer);
> - omap_dm_timer_free(lirc_rx51->pwm_timer);
> - omap_dm_timer_free(lirc_rx51->pulse_timer);
> + lirc_rx51->dmtimer->disable(lirc_rx51->pwm_timer);
> + lirc_rx51->dmtimer->disable(lirc_rx51->pulse_timer);
> + lirc_rx51->dmtimer->free(lirc_rx51->pwm_timer);
> + lirc_rx51->dmtimer->free(lirc_rx51->pulse_timer);
> lirc_rx51->wbuf_index = -1;
>
> return 0;
> @@ -446,7 +447,13 @@ static int lirc_rx51_probe(struct platform_device *dev)
> {
> lirc_rx51_driver.features = LIRC_RX51_DRIVER_FEATURES;
> lirc_rx51.pdata = dev->dev.platform_data;
> + if (!lirc_rx51.pdata->dmtimer) {
> + dev_err(&dev->dev, "no dmtimer?\n");
> + return -ENODEV;
> + }
> +
> lirc_rx51.pwm_timer_num = lirc_rx51.pdata->pwm_timer;
> + lirc_rx51.dmtimer = lirc_rx51.pdata->dmtimer;
> lirc_rx51.dev = &dev->dev;
> lirc_rx51_driver.dev = &dev->dev;
> lirc_rx51_driver.minor = lirc_register_driver(&lirc_rx51_driver);
>
Thanks,
Ivo
More information about the linux-arm-kernel
mailing list