[PATCH v2 27/54] KVM: arm/arm64: vgic-new: Add PRIORITY registers handlers
Andre Przywara
andre.przywara at arm.com
Thu Apr 28 09:45:46 PDT 2016
The priority register handlers are shared between the v2 and v3
emulation, so their implementation goes into vgic-mmio.c, to be
easily referenced from the v3 emulation as well later.
There is a corner case when we change the priority of a pending
interrupt which we don't handle at the moment.
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
Changelog v1 .. v2:
- adapt to new MMIO framework
virt/kvm/arm/vgic/vgic-mmio-v2.c | 2 +-
virt/kvm/arm/vgic/vgic-mmio.c | 39 +++++++++++++++++++++++++++++++++++++++
virt/kvm/arm/vgic/vgic-mmio.h | 7 +++++++
3 files changed, 47 insertions(+), 1 deletion(-)
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v2.c b/virt/kvm/arm/vgic/vgic-mmio-v2.c
index 6b58455..78ed2ac 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v2.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v2.c
@@ -84,7 +84,7 @@ static const struct vgic_register_region vgic_v2_dist_registers[] = {
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_CLEAR,
vgic_mmio_read_active, vgic_mmio_write_cactive, 1),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PRI,
- vgic_mmio_read_raz, vgic_mmio_write_wi, 8),
+ vgic_mmio_read_priority, vgic_mmio_write_priority, 8),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_TARGET,
vgic_mmio_read_raz, vgic_mmio_write_wi, 8),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_CONFIG,
diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c
index 74c76e5..ac13115 100644
--- a/virt/kvm/arm/vgic/vgic-mmio.c
+++ b/virt/kvm/arm/vgic/vgic-mmio.c
@@ -282,6 +282,45 @@ retry:
}
}
+unsigned long vgic_mmio_read_priority(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len)
+{
+ u32 intid = addr & 0x3ff;
+ int i;
+ u64 val = 0;
+
+ for (i = 0; i < len; i++) {
+ struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+ val |= (u64)irq->priority << (i * 8);
+ }
+
+ return val;
+}
+
+/*
+ * We currently don't handle changing the priority of an interrupt that
+ * is already pending on a VCPU. If there is a need for this, we would
+ * need to make this VCPU exit and re-evaluate the priorities, potentially
+ * leading to this interrupt getting presented now to the guest (if it has
+ * been masked by the priority mask before).
+ */
+void vgic_mmio_write_priority(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len,
+ unsigned long val)
+{
+ u32 intid = addr & 0x3ff;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+ spin_lock(&irq->irq_lock);
+ irq->priority = (val >> (i * 8)) & 0xff;
+ spin_unlock(&irq->irq_lock);
+ }
+}
+
static int match_region(const void *key, const void *elt)
{
const unsigned int offset = (unsigned long)key;
diff --git a/virt/kvm/arm/vgic/vgic-mmio.h b/virt/kvm/arm/vgic/vgic-mmio.h
index fa875dc..cd04ac5 100644
--- a/virt/kvm/arm/vgic/vgic-mmio.h
+++ b/virt/kvm/arm/vgic/vgic-mmio.h
@@ -107,6 +107,13 @@ void vgic_mmio_write_sactive(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len,
unsigned long val);
+unsigned long vgic_mmio_read_priority(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len);
+
+void vgic_mmio_write_priority(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len,
+ unsigned long val);
+
unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev);
#endif
--
2.7.3
More information about the linux-arm-kernel
mailing list