[PATCH V6 02/13] pci, acpi: Provide generic way to assign bus domain number.
Lorenzo Pieralisi
lorenzo.pieralisi at arm.com
Wed Apr 27 10:31:29 PDT 2016
On Wed, Apr 27, 2016 at 11:44:53AM -0500, Bjorn Helgaas wrote:
> On Wed, Apr 27, 2016 at 12:17:58PM +0100, Lorenzo Pieralisi wrote:
> > On Tue, Apr 26, 2016 at 09:26:49PM -0500, Bjorn Helgaas wrote:
> > > On Fri, Apr 15, 2016 at 07:06:37PM +0200, Tomasz Nowicki wrote:
> > > > As we now have valid PCI host bridge device reference we can
> > > > introduce code that is going to find its bus domain number using
> > > > ACPI _SEG method.
> > > >
> > > > Note that _SEG method is optional, therefore _SEG absence means
> > > > that all PCI buses belong to domain 0.
> > > >
> > > > While at it, for the sake of code clarity we put ACPI and DT domain
> > > > assign methods into the corresponding helpers.
> > > >
> > > > Signed-off-by: Tomasz Nowicki <tn at semihalf.com>
> > > > Reviewed-by: Liviu Dudau <Liviu.Dudau at arm.com>
> > > > Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
> > > > Tested-by: Jeremy Linton <jeremy.linton at arm.com>
> > > > Tested-by: Duc Dang <dhdang at apm.com>
> > > > Tested-by: Dongdong Liu <liudongdong3 at huawei.com>
> > > > Tested-by: Hanjun Guo <hanjun.guo at linaro.org>
> > > > Tested-by: Graeme Gregory <graeme.gregory at linaro.org>
> > > > Tested-by: Sinan Kaya <okaya at codeaurora.org>
> > > > ---
> > > > drivers/acpi/pci_root.c | 18 ++++++++++++++++++
> > > > drivers/pci/pci.c | 11 +++++++++--
> > > > include/linux/pci-acpi.h | 2 ++
> > > > 3 files changed, 29 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> > > > index 4581e0e..d9a70c4 100644
> > > > --- a/drivers/acpi/pci_root.c
> > > > +++ b/drivers/acpi/pci_root.c
> > > > @@ -419,6 +419,24 @@ out:
> > > > }
> > > > EXPORT_SYMBOL(acpi_pci_osc_control_set);
> > > >
> > > > +int acpi_pci_bus_domain_nr(struct device *parent)
>
> It looks like acpi_pci_bus_domain_nr() could be under #ifdef
> CONFIG_PCI_DOMAINS_GENERIC, right?
Yes it should.
> > > > +{
> > > > + struct acpi_device *acpi_dev = to_acpi_device(parent);
> > > > + unsigned long long segment = 0;
> > > > + acpi_status status;
> > > > +
> > > > + /*
> > > > + * If _SEG method does not exist, following ACPI spec (6.5.6)
> > > > + * all PCI buses belong to domain 0.
> > > > + */
> > > > + status = acpi_evaluate_integer(acpi_dev->handle, METHOD_NAME__SEG, NULL,
> > > > + &segment);
> > >
> > > We already have code in acpi_pci_root_add() to evaluate _SEG. We
> > > don't want to evaluate it *twice*, do we?
> > >
> > > I was sort of expecting that if you added it here, we'd remove the
> > > existing call, but it looks like you're keeping both?
> >
> > We can't remove the existing call, since it is used on X86 and IA64
> > to store the segment number that, in the process, is used in their
> > pci_domain_nr() arch specific callback to retrieve the domain nr.
> >
> > On ARM64, that selects PCI_DOMAINS_GENERIC, we have to find a way
> > to retrieve the domain number that is not arch dependent, since
> > this is generic code, we can't rely on any bus->sysdata format (unless
> > we do something like JC did below), therefore the only way is to call
> > the _SEG method *again* here, which also forced Tomasz to go through
> > the ACPI_COMPANION setting song and dance and pass the parent pointer
> > to pci_create_root_bus() (see patch 1), which BTW is a source of
> > trouble on its own as you noticed.
> >
> > JC solved it differently, via sysdata and pseudo-generic code:
> >
> > http://www.spinics.net/lists/arm-kernel/msg478167.html
>
> The thing I don't like about this is the special case of checking
> parent and parent->of_node to figure out whether we should use the
> segment from ACPI and the fragility of depending on the fact that the
> companion hasn't been set yet.
>
> > http://www.spinics.net/lists/arm-kernel/msg478169.html
> >
> > I like neither, we need the lesser of two evils though.
>
> Today we call pci_bus_assign_domain_nr() from the PCI core (from
> pci_create_root_bus()). This is only implemented for
> PCI_DOMAINS_GENERIC, but even so, it fiddles around to figure out
> whether to get the domain from DT or to assign a new one.
>
> That seems backwards to me. The host bridge drivers already know
> where the domain should come from (ACPI _SEG, DT, etc.) and in the
> long term, I think they should be responsible for looking up or
> assigning a domain number *before* they call pci_create_root_bus().
Yes, the question still is how pci_create_root_bus() can get that
value (I am pretty certain this was heavily debated in the past, which
does not mean we can't give it another try).
> > > > + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
> > > > + dev_err(&acpi_dev->dev, "can't evaluate _SEG\n");
> > > > +
> > > > + return segment;
> > > > +}
> > > > +
> > > > static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm)
> > > > {
> > > > u32 support, control, requested;
> > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > > index 25e0327..1a74e87 100644
> > > > --- a/drivers/pci/pci.c
> > > > +++ b/drivers/pci/pci.c
> > > > @@ -19,6 +19,7 @@
> > > > #include <linux/spinlock.h>
> > > > #include <linux/string.h>
> > > > #include <linux/log2.h>
> > > > +#include <linux/pci-acpi.h>
> > > > #include <linux/pci-aspm.h>
> > > > #include <linux/pm_wakeup.h>
> > > > #include <linux/interrupt.h>
> > > > @@ -4779,7 +4780,7 @@ int pci_get_new_domain_nr(void)
> > > > }
> > > >
> > > > #ifdef CONFIG_PCI_DOMAINS_GENERIC
> > > > -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
> > > > +static int of_pci_bus_domain_nr(struct device *parent)
> > > > {
> > > > static int use_dt_domains = -1;
> > > > int domain = -1;
> > > > @@ -4823,7 +4824,13 @@ void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
> > > > domain = -1;
> > > > }
> > > >
> > > > - bus->domain_nr = domain;
> > > > + return domain;
> > > > +}
> > > > +
> > > > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
> > > > +{
> > > > + bus->domain_nr = acpi_disabled ? of_pci_bus_domain_nr(parent) :
> > > > + acpi_pci_bus_domain_nr(parent);
>
> We have the pci_bus * here, so to_pci_host_bridge(bus->bridge) gives
> us the struct pci_host_bridge. I can't remember why we put domain_nr
> in the struct pci_bus instead of in the struct pci_host_bridge. It
> seems like pci_host_bridge is the more logical place for it, because
> every bus below the host bridge must have the same domain by
> definition.
>
> Would it be feasible to either (a) move domain_nr to the
> pci_host_bridge, or (b) change acpi_pci_bus_domain_nr() so it uses the
> struct pci_bus * or the struct device * to find the struct
> acpi_pci_root where segment has already been stored by
> acpi_pci_root_add()?
(b) is what JC implemented even though it works differently for
different hosts since it all depends on what's in bus->sysdata.
It can certainly be done in a generic way (that works on X86 and IA64
too), let's give it more thought.
> Another wrinkle is the quirk added by 1f09b09b4de0 ("x86/PCI: Ignore
> _SEG on HP xw9300"). x86 doesn't use PCI_DOMAINS_GENERIC yet, so this
> patch wouldn't break it, but I hope x86 can use PCI_DOMAINS_GENERIC in
> the future, and then it will be a problem if we evaluate _SEG again.
Yes, I share your concern here and I thought about that, if that's the
end goal let's find a solution that works across arches (or we temporarily
use JC's code and we then generalize it).
Thanks,
Lorenzo
>
> > > > }
> > > > #endif
> > > > #endif
> > > > diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
> > > > index 89ab057..a72e22d 100644
> > > > --- a/include/linux/pci-acpi.h
> > > > +++ b/include/linux/pci-acpi.h
> > > > @@ -22,6 +22,7 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
> > > > {
> > > > return acpi_remove_pm_notifier(dev);
> > > > }
> > > > +extern int acpi_pci_bus_domain_nr(struct device *parent);
> > > > extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
> > > >
> > > > static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
> > > > @@ -109,6 +110,7 @@ extern const u8 pci_acpi_dsm_uuid[];
> > > > #else /* CONFIG_ACPI */
> > > > static inline void acpi_pci_add_bus(struct pci_bus *bus) { }
> > > > static inline void acpi_pci_remove_bus(struct pci_bus *bus) { }
> > > > +static inline int acpi_pci_bus_domain_nr(struct device *parent) { return -1; }
> > > > #endif /* CONFIG_ACPI */
> > > >
> > > > #ifdef CONFIG_ACPI_APEI
> > > > --
> > > > 1.9.1
> > > >
> > > > --
> > > > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> > > > the body of a message to majordomo at vger.kernel.org
> > > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > >
>
More information about the linux-arm-kernel
mailing list