[PATCH v2] ARM: dts: imx28-m28: Remove unneeded partition nodes

[Marek Vasut]

On 04/27/2016 05:27 PM, Fabio Estevam wrote:
> mtdparts is passed from command line, so there is no need to have a
> default partitioning in device-tree.
> 
> Suggested-by: Marek Vasut <marex at denx.de>
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Acked-by: Marek Vasut <marex at denx.de>

Thanks for doing this :)

> ---
> Changes since v1:
> - Remove all partition nodes
> 
>  arch/arm/boot/dts/imx28-m28.dtsi | 26 --------------------------
>  1 file changed, 26 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
> index 759cc56..6cebaa6 100644
> --- a/arch/arm/boot/dts/imx28-m28.dtsi
> +++ b/arch/arm/boot/dts/imx28-m28.dtsi
> @@ -27,32 +27,6 @@
>  				pinctrl-names = "default";
>  				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
>  				status = "okay";
> -
> -				partition at 0 {
> -					label = "bootloader";
> -					reg = <0x00000000 0x00300000>;
> -					read-only;
> -				};
> -
> -				partition at 1 {
> -					label = "environment";
> -					reg = <0x00300000 0x00080000>;
> -				};
> -
> -				partition at 2 {
> -					label = "redundant-environment";
> -					reg = <0x00380000 0x00080000>;
> -				};
> -
> -				partition at 3 {
> -					label = "kernel";
> -					reg = <0x00400000 0x00400000>;
> -				};
> -
> -				partition at 4 {
> -					label = "filesystem";
> -					reg = <0x00800000 0x0f800000>;
> -				};
>  			};
>  		};
>  
> 


-- 
Best regards,
Marek Vasut