[PATCH 1/2] clk: imx: do not sleep if IRQ's are still disabled

[Dong Aisheng]

On Tue, Apr 26, 2016 at 7:16 PM, Dong Aisheng <dongas86 at gmail.com> wrote:
> On Tue, Apr 26, 2016 at 5:31 PM, Lucas Stach <l.stach at pengutronix.de> wrote:
>> Am Dienstag, den 26.04.2016, 13:51 +0800 schrieb Dong Aisheng:
>>> Hi Shawn,
>>>
>>> On Tue, Apr 26, 2016 at 9:23 AM, Shawn Guo <shawnguo at kernel.org> wrote:
>>> > On Thu, Apr 21, 2016 at 11:45:20AM +0800, Dong Aisheng wrote:
>>> >> On Fri, Jan 29, 2016 at 02:49:23PM -0800, Stefan Agner wrote:
>>> >> > If a clock gets enabled early during boot time, it can lead to a PLL
>>> >> > startup. The wait_lock function makes sure that the PLL is really
>>> >> > stareted up before it gets used. However, the function sleeps which
>>> >> > leads to scheduling and an error:
>>> >> > bad: scheduling from the idle thread!
>>> >> > ...
>>> >> >
>>> >> > Use udelay in case IRQ's are still disabled.
>>> >> >
>>> >> > Signed-off-by: Stefan Agner <stefan at agner.ch>
>>> >> > ---
>>> >> >  drivers/clk/imx/clk-pllv3.c | 5 ++++-
>>> >> >  1 file changed, 4 insertions(+), 1 deletion(-)
>>> >> >
>>> >> > diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
>>> >> > index c05c43d..b5ff561 100644
>>> >> > --- a/drivers/clk/imx/clk-pllv3.c
>>> >> > +++ b/drivers/clk/imx/clk-pllv3.c
>>> >> > @@ -63,7 +63,10 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
>>> >> >                     break;
>>> >> >             if (time_after(jiffies, timeout))
>>> >> >                     break;
>>> >> > -           usleep_range(50, 500);
>>> >> > +           if (unlikely(irqs_disabled()))
>>> >>
>>> >> This causes a bit confusion that clk_pllv3_prepare is sleepable.
>>> >> But this line indicates it's possible to be called in irq context.
>>> >> Although it's only happened during kernel boot phase where irq is
>>> >> still not enabled.
>>> >> It seems schedule_debug() somehow did not catch it during early boot
>>> >> phase. Maybe schedule guys can help explain.
>>> >>
>>> >> My question is if it's really worthy to introduce this confusion
>>> >> to fix the issue since the delay is minor?
>>> >
>>> > I do not understand why it's confusing.  The code already obviously
>>> > indicates this is a special handling for cases where irq is still not
>>> > enabled, rather than for irq context.
>>> >
>>>
>>> The code itself has nothing telling it's a special handling for the
>>> case where irq is
>>> still not enabled.
>>> Even it tells, it may still cause confusing by adding complexity in
>>> clk_pllv3_prepare()
>>> which actually should be called in non-atomic context as it could sleep.
>>>
>>> > The patch is to fix the "bad: scheduling from the idle thread!" warning
>>> > rather than minimize the delay.  Do you have an opinion on how to fix
>>> > the warning?
>>> >
>>>
>>> I just wonder maybe we could simply just using udelay(50) instead of
>>> usleep_range(50, 500) to eliminate the confusing since it's minor cast.
>>> What do you think of it?
>>
>> Why should we needless burn CPU time in the likely case of
>> clk_pllv3_prepare() being called in sleepable context?
>>
>
> I think because the delay time is not big.
> And pll clks are system basic clocks and less likely to be frequently
> enabled/disabled.
>
>> Using udelay() in a sleepable context is even more confusing than having
>> the special case for clk_prepare() being called in atomic context IMHO.
>>
>
> I can't agree having special case by checking
> unlikely(irqs_disabled()) is better
> which is obviously more confusing IMHO.
> I'd more like to hide it from users.
>
> I see other platforms like samsung&tegra also implements pll using udelay.
> But difference is that they implement it in .enable(I) clalback not prepare.
>
> How about simply remove usleep_range to poll instead of using udelay?
> Cause most PLL enable may be more faster than 50ns.
>
> And according to kernel doc, for delay time less than 10ns,
> udelay or polling is recommended.
>

Shawn,
What's your suggestion?

Regards
Dong Aisheng

>> Regards,
>> Lucas
>>
>
> Regards
> Dong Aisheng