[PATCH 1/8] mfd: stmpe: Add STMPE_IDX_SYS_CTRL/2 enum
Lee Jones
lee.jones at linaro.org
Tue Apr 26 01:19:15 PDT 2016
On Tue, 19 Apr 2016, patrice.chotard at st.com wrote:
> From: Patrice Chotard <patrice.chotard at st.com>
>
> As STMPE1801/1601/24xx has a SYS_CTRL register and
> STMPE1601/2403 has even a SYS_CTRL2 register, add
> STMPE_IDX_SYS_CTRL/2 and update driver code accordingly
>
> This update prepares the ground for not yet supported STMPE1600
> which share similar REG_SYS_CTRL register.
>
> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
> ---
> drivers/mfd/stmpe.c | 21 ++++++++++++++-------
> drivers/mfd/stmpe.h | 2 ++
> include/linux/mfd/stmpe.h | 2 ++
> 3 files changed, 18 insertions(+), 7 deletions(-)
When you fix and resubmit, please add my:
Acked-by: Lee Jones <lee.jones at linaro.org>
... for my own personal reference.
> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index fb8f9e8..c553b73 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -448,6 +448,8 @@ static const struct mfd_cell stmpe_ts_cell = {
>
> static const u8 stmpe811_regs[] = {
> [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
> + [STMPE_IDX_SYS_CTRL] = STMPE811_REG_SYS_CTRL,
> + [STMPE_IDX_SYS_CTRL2] = STMPE811_REG_SYS_CTRL2,
> [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
> [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
> [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
> @@ -490,7 +492,7 @@ static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
> if (blocks & STMPE_BLOCK_TOUCHSCREEN)
> mask |= STMPE811_SYS_CTRL2_TSC_OFF;
>
> - return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask,
> + return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], mask,
> enable ? 0 : mask);
> }
>
> @@ -535,6 +537,8 @@ static struct stmpe_variant_info stmpe610 = {
>
> static const u8 stmpe1601_regs[] = {
> [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
> + [STMPE_IDX_SYS_CTRL] = STMPE1601_REG_SYS_CTRL,
> + [STMPE_IDX_SYS_CTRL2] = STMPE1601_REG_SYS_CTRL2,
> [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
> [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
> [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
> @@ -619,13 +623,13 @@ static int stmpe1601_autosleep(struct stmpe *stmpe,
> return timeout;
> }
>
> - ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
> + ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
> STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
> timeout);
> if (ret < 0)
> return ret;
>
> - return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
> + return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
> STPME1601_AUTOSLEEP_ENABLE,
> STPME1601_AUTOSLEEP_ENABLE);
> }
> @@ -650,7 +654,7 @@ static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
> else
> mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
>
> - return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
> + return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
> enable ? mask : 0);
> }
>
> @@ -689,6 +693,7 @@ static struct stmpe_variant_info stmpe1601 = {
> */
> static const u8 stmpe1801_regs[] = {
> [STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID,
> + [STMPE_IDX_SYS_CTRL] = STMPE1801_REG_SYS_CTRL,
> [STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW,
> [STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW,
> [STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW,
> @@ -735,14 +740,14 @@ static int stmpe1801_reset(struct stmpe *stmpe)
> unsigned long timeout;
> int ret = 0;
>
> - ret = __stmpe_set_bits(stmpe, STMPE1801_REG_SYS_CTRL,
> + ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL],
> STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
> if (ret < 0)
> return ret;
>
> timeout = jiffies + msecs_to_jiffies(100);
> while (time_before(jiffies, timeout)) {
> - ret = __stmpe_reg_read(stmpe, STMPE1801_REG_SYS_CTRL);
> + ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);
> if (ret < 0)
> return ret;
> if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
> @@ -773,6 +778,8 @@ static struct stmpe_variant_info stmpe1801 = {
>
> static const u8 stmpe24xx_regs[] = {
> [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
> + [STMPE_IDX_SYS_CTRL] = STMPE24XX_REG_SYS_CTRL,
> + [STMPE_IDX_SYS_CTRL2] = STMPE24XX_REG_SYS_CTRL2,
> [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
> [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
> [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
> @@ -819,7 +826,7 @@ static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
> if (blocks & STMPE_BLOCK_KEYPAD)
> mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
>
> - return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask,
> + return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
> enable ? mask : 0);
> }
>
> diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
> index 84adb46..406f9f2 100644
> --- a/drivers/mfd/stmpe.h
> +++ b/drivers/mfd/stmpe.h
> @@ -138,6 +138,7 @@ int stmpe_remove(struct stmpe *stmpe);
> #define STMPE811_NR_INTERNAL_IRQS 8
>
> #define STMPE811_REG_CHIP_ID 0x00
> +#define STMPE811_REG_SYS_CTRL 0x03
> #define STMPE811_REG_SYS_CTRL2 0x04
> #define STMPE811_REG_SPI_CFG 0x08
> #define STMPE811_REG_INT_CTRL 0x09
> @@ -264,6 +265,7 @@ int stmpe_remove(struct stmpe *stmpe);
> #define STMPE24XX_NR_INTERNAL_IRQS 9
>
> #define STMPE24XX_REG_SYS_CTRL 0x02
> +#define STMPE24XX_REG_SYS_CTRL2 0x03
> #define STMPE24XX_REG_ICR_LSB 0x11
> #define STMPE24XX_REG_IER_LSB 0x13
> #define STMPE24XX_REG_ISR_MSB 0x14
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index cb83883..6c6690f 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -39,6 +39,8 @@ enum stmpe_partnum {
> */
> enum {
> STMPE_IDX_CHIP_ID,
> + STMPE_IDX_SYS_CTRL,
> + STMPE_IDX_SYS_CTRL2,
> STMPE_IDX_ICR_LSB,
> STMPE_IDX_IER_LSB,
> STMPE_IDX_ISR_LSB,
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the linux-arm-kernel
mailing list