[PATCH 2/2] ARM: dts: imx6ul-pico-hobbit: Add initial support

Shawn Guo shawnguo at kernel.org
Mon Apr 25 18:49:38 PDT 2016 

On Mon, Apr 18, 2016 at 10:12:18AM -0300, Fabio Estevam wrote:
> Add initial support for imx6ul pico hobbit board.
> 
> For information about this board, please visit:
> http://www.wandboard.org/images/hobbit/hobbitboard-imx6ul-reva1.pdf
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> ---
>  arch/arm/boot/dts/Makefile               |   1 +
>  arch/arm/boot/dts/imx6ul-pico-hobbit.dts | 568 +++++++++++++++++++++++++++++++
>  2 files changed, 569 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6ul-pico-hobbit.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 972c85b..a99db30 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -387,6 +387,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
>  	imx6sx-sdb.dtb
>  dtb-$(CONFIG_SOC_IMX6UL) += \
>  	imx6ul-14x14-evk.dtb \
> +	imx6ul-pico-hobbit.dtb \
>  	imx6ul-tx6ul-0010.dtb \
>  	imx6ul-tx6ul-0011.dtb \
>  	imx6ul-tx6ul-mainboard.dtb
> diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
> new file mode 100644
> index 0000000..bfe1349
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
> @@ -0,0 +1,568 @@
> +/*
> + * Copyright 2015 Technexion Ltd.
> + *
> + * Author: Wig Cheng  <wig.cheng at technexion.com>
> + *	   Richard Hu <richard.hu at technexion.com>
> + *	   Tapani Utriainen <tapani at technexion.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License
> + *     version 2 as published by the Free Software Foundation.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6ul.dtsi"
> +
> +/ {
> +	model = "Technexion Pico i.MX6UL Board";
> +	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
> +
> +	memory {
> +		reg = <0x80000000 0x10000000>;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart6;
> +	};
> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm3 0 5000000>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +		status = "okay";
> +	};
> +
> +	reg_sd1_vmmc: reg-sd1-vmmc {

regulator-xxx for node name please.

> +		compatible = "regulator-fixed";
> +		regulator-name = "VSD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_2p5v: reg-2p5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "2P5V";
> +		regulator-min-microvolt = <2500000>;
> +		regulator-max-microvolt = <2500000>;
> +	};
> +
> +	reg_3p3v: reg-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3P3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_usb_otg_vbus: reg-usb-otg-vbus {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_usb_otg1>;
> +		regulator-name = "usb_otg_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio1 6 0>;
> +	};
> +
> +	sound {
> +		compatible = "fsl,imx-audio-sgtl5000";
> +		model = "imx6ul-sgtl5000";
> +		audio-cpu = <&sai1>;
> +		audio-codec = <&codec>;
> +		audio-routing =
> +			"LINE_IN", "Line In Jack",
> +			"MIC_IN", "Mic Jack",
> +			"Mic Jack", "Mic Bias",
> +			"Headphone Jack", "HP_OUT";
> +	};
> +
> +	clocks {
> +		sys_mclk: clock {

Put it directly under root node with node name like clock-xxx.

> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <24576000>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";

Have a newline between properties and sub-node.

> +		hobbitled {
> +			label = "hobbitled";
> +			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	status = "okay";
> +};
> +
> +&can2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	status = "okay";
> +};
> +
> +&clks {
> +	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
> +	assigned-clock-rates = <786432000>;
> +};
> +
> +&fec2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet2>;
> +	phy-mode = "rmii";
> +	phy-handle = <&ethphy1>;
> +	status = "okay";
> +	phy-reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
> +	phy-reset-duration = <11>;
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy1: ethernet-phy at 1 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			reg = <1>;
> +			max-speed = <100>;
> +			interrupt-parent = <&gpio5>;
> +			interrupts = <6 IRQ_TYPE_LEVEL_LOW 0>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	pmic: pfuze3000 at 08 {
> +		compatible = "fsl,pfuze3000";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1a {
> +				regulator-min-microvolt = <700000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			/* VDD_ARM_SOC_IN*/
> +			sw1b_reg: sw1b {
> +				regulator-min-microvolt = <700000>;
> +				regulator-max-microvolt = <1475000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <2500000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			/* DRAM */
> +			sw3a_reg: sw3 {
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <1650000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			/* DRAM */
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vldo1 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen2_reg: vldo2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen3_reg: vccsd {
> +				regulator-min-microvolt = <2850000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen4_reg: v33 {
> +				regulator-min-microvolt = <2850000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vldo3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vldo4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c2 {
> +	clock_frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	codec: sgtl5000 at 0a {
> +		reg = <0x0a>;
> +		compatible = "fsl,sgtl5000";
> +		clocks = <&sys_mclk>;
> +		VDDA-supply = <&reg_2p5v>;
> +		VDDIO-supply = <&reg_3p3v>;
> +	};
> +};
> +
> +&i2c3 {
> +	clock_frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	status = "okay";
> +};
> +
> +&lcdif {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
> +	display = <&display0>;
> +	status = "okay";
> +
> +	display0: display0 {
> +		bits-per-pixel = <32>;
> +		bus-width = <24>;
> +
> +		display-timings {
> +			native-mode = <&timing0>;

Have a new line between properties and sub-node.

> +			timing0: timing0 {
> +			clock-frequency = <33200000>;

One more level of indentation is needed.

> +			hactive = <800>;
> +			vactive = <480>;
> +			hfront-porch = <210>;
> +			hback-porch = <46>;
> +			hsync-len = <1>;
> +			vback-porch = <22>;
> +			vfront-porch = <23>;
> +			vsync-len = <1>;
> +

Drop this newline.

> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +			de-active = <1>;
> +			pixelclk-active = <0>;
> +			};
> +		};
> +	};
> +};
> +
> +&pwm3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm3>;
> +	status = "okay";
> +};
> +
> +&pwm7 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm7>;
> +	status = "okay";
> +};
> +
> +&pwm8 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm8>;
> +	status = "okay";
> +};
> +
> +&sai1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai1>;
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&uart6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart6>;
> +	status = "okay";
> +};
> +
> +&usbotg1 {
> +	vbus-supply = <&reg_usb_otg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usb_otg1_id>;
> +	dr_mode = "otg";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	dr_mode = "host";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	bus-width = <8>;
> +	no-1-8-v;
> +	non-removable;
> +	keep-power-in-suspend;
> +	status = "okay";
> +};
> +
> +&usdhc2 {  /* Wifi SDIO */
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	no-1-8-v;
> +	keep-power-in-suspend;
> +	enable-sdio-wakeup;

The property is deprecated.  See bindings/power/wakeup-source.txt for
details.

> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_uart5: uart5grp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x1b0b1
> +			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x1b0b1
> +			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
> +			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_uart6: uart6grp {
> +		fsl,pins = <
> +			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
> +			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
> +			MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B	0x03029
> +			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
> +			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
> +			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
> +			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {

Sort the pinctrl entries alphabetically in label names.

Shawn

> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO02__I2C1_SCL		0x4001b8b0
> +			MX6UL_PAD_GPIO1_IO03__I2C1_SDA		0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
> +			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART1_TX_DATA__I2C3_SCL	0x4001b8b0
> +			MX6UL_PAD_UART1_RX_DATA__I2C3_SDA	0x4001b8b0
> +			>;
> +	};
> +
> +	pinctrl_lcdif_dat: lcdifdatgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
> +			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
> +			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
> +			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
> +			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
> +			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
> +			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
> +			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
> +			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
> +			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
> +			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
> +			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
> +			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
> +			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
> +			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
> +			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
> +			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
> +			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
> +			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
> +			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
> +			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
> +			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
> +			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
> +			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
> +		>;
> +	};
> +
> +	pinctrl_lcdif_ctrl: lcdifctrlgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
> +			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
> +			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
> +			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
> +			/* LCD reset */
> +			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
> +		>;
> +	};
> +
> +	pinctrl_enet2: enet2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_EN__ENET2_MDC	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
> +			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x800
> +			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x79
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
> +			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
> +			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
> +			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
> +			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
> +			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
> +		>;
> +	};
> +
> +	pinctrl_sai1: sai1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b0
> +			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b0
> +			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
> +			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
> +		>;
> +	};
> +
> +	pinctrl_flexcan1: flexcan1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
> +			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
> +		>;
> +	};
> +
> +	pinctrl_flexcan2: flexcan2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
> +			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
> +		>;
> +	};
> +
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b0
> +			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b0
> +			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b0
> +			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_pwm3: pwm3grp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x110b0
> +		>;
> +	};
> +
> +	pinctrl_usb_otg1_id: usbotg1idgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
> +		>;
> +	};
> +
> +	pinctrl_usb_otg1: usbotg1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x10b0
> +			>;
> +		};
> +
> +	pinctrl_pwm7: pwm7grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x110b0
> +		>;
> +	};
> +
> +	pinctrl_pwm8: pwm8grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
> +		>;
> +	};
> +};
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>

More information about the linux-arm-kernel mailing list