[GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.7
Simon Horman
horms+renesas at verge.net.au
Sun Apr 24 21:27:31 PDT 2016
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT updates for v4.7.
This pull request is based on "[GIT PULL] Renesas ARM Based SoC Cleanup for
v4.7", tagged as renesas-cleanup-for-v4.7, which you have previously pulled.
The reason for that base is to avoid conflicts.
The differences between v1 of this pull request are:
* Dropped changes to reference both DMA controllers pending further
discussion
* Added:
- Configire NMI key as wakeup source in DT of kzm9g board
- Add SDHI support to DT of gose board
- Add support of UHS-I SDR-50 for SDHI to DT of r8a7790 SoC
The following changes since commit 000025cfbb9e8bafd0a1fa84d8d83526d24bde42:
ARM: dts: sh73a0: Remove unnecessary clock-output-names properties (2016-03-28 08:56:11 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.7
for you to fetch changes up to 6f92cb2f454c26d9bdada902e22af4bc361a5202:
ARM: dts: gose: Enable SDHI controllers (2016-04-25 14:10:11 +1000)
----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v4.7
* Configure NMI key as wakeup source in DT of kzm9g board
* Add SDHI support to DT of gose board
* Add support of UHS-I SDR-50 for SDHI to DT of r8a7790 SoC
* Correct interrupt type for ARM TWD in DT of r8a7779 and sh73a0 SoCs
* Add IIC support to DT of r8a7794 SoC
* Add CAN support to DT of r8a7793 and r8a7794 SoCs
* Add SCIF2 support to r8a7790 device tree
* Use CAN, JPU and USB3.0 fallback compatibility string
in DT of r8a7791 and r8a7790 SoCs
----------------------------------------------------------------
Ben Hutchings (1):
ARM: dts: r8a7790: Set maximum frequencies for SDHI clocks
Geert Uytterhoeven (5):
ARM: dts: r8a7790: Add SCIF2 clock
ARM: dts: r8a7790: Add SCIF2 device node
ARM: dts: sh73a0: Correct interrupt type for ARM TWD
ARM: dts: r8a7779: Correct interrupt type for ARM TWD
ARM: dts: kzm9g: Configure NMI key as wake-up source
Simon Horman (12):
ARM: dts: r8a7790: use fallback jpu compatibility string
ARM: dts: r8a7791: use fallback jpu compatibility string
ARM: dts: r8a7791: use fallback can compatibility string
ARM: dts: r8a7790: use fallback can compatibility string
ARM: dts: r8a7794: add CAN clocks to device tree
ARM: dts: r8a7794: add CAN nodes to device tree
ARM: dts: r8a7793: add CAN clocks to device tree
ARM: dts: r8a7793: add CAN nodes to device tree
ARM: dts: r8a7794: add IIC clocks
ARM: dts: r8a7794: Add IIC nodes
ARM: dts: r8a7790: Use USB3.0 fallback compatibility string
ARM: dts: r8a7791: Use USB3.0 fallback compatibility string
Ulrich Hecht (2):
ARM: dts: r8a7793: Add SDHI controllers
ARM: dts: gose: Enable SDHI controllers
Wolfram Sang (2):
ARM: dts: r8a7790: lager: Enable UHS-I SDR-50
ARM: dts: r8a7790: fix max-frequency for SDHI
arch/arm/boot/dts/r8a7779.dtsi | 2 +-
arch/arm/boot/dts/r8a7790-lager.dts | 22 +++++-
arch/arm/boot/dts/r8a7790.dtsi | 32 ++++++--
arch/arm/boot/dts/r8a7791.dtsi | 8 +-
arch/arm/boot/dts/r8a7793-gose.dts | 119 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/r8a7793.dtsi | 82 +++++++++++++++++++-
arch/arm/boot/dts/r8a7794.dtsi | 92 ++++++++++++++++++++---
arch/arm/boot/dts/sh73a0-kzm9g.dts | 7 ++
arch/arm/boot/dts/sh73a0.dtsi | 2 +-
include/dt-bindings/clock/r8a7790-clock.h | 1 +
include/dt-bindings/clock/r8a7794-clock.h | 5 ++
11 files changed, 343 insertions(+), 29 deletions(-)
More information about the linux-arm-kernel
mailing list