[GIT PULL 1/4] Broadcom devicetree changes for 4.7
Florian Fainelli
f.fainelli at gmail.com
Sat Apr 23 12:58:57 PDT 2016
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.7/devicetree
for you to fetch changes up to 3db62afd11738f896ef83132022a40be74961860:
Merge tag 'bcm2835-dt-next-2016-04-20' into devicetree/next (2016-04-22 12:22:04 -0700)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoC Device Tree changes:
- Rafal adds proper VCC GPIO to be fed to the USB host controllers for known
BCM5301x devices needing that, he also enables earlycon, and enables the
SPI-NOR flashes on relevant devices
- Eric adds the VideoCore 4 Device Tree nodes to the BCM283x Device Tree and
provides a DRM patch to kick out the simplefb framebuffer to avoid conflicts
- Stephan adds proper CPU nodes for the ARM processor on the BCM2835 SoC Device
Tree
- Martin provides a binding fix for the DMA channel interrupt numbers and
description
----------------------------------------------------------------
Eric Anholt (2):
drm/vc4: Kick out the simplefb framebuffer before we set up KMS.
ARM: bcm2835: Add VC4 to the device tree.
Florian Fainelli (1):
Merge tag 'bcm2835-dt-next-2016-04-20' into devicetree/next
Martin Sperl (1):
dt/bindings: bcm2835: correct description for DMA-int
Rafał Miłecki (3):
ARM: BCM5301X: Set vcc-gpio for USB controllers of few devices
ARM: BCM5301X: Enable earlycon on tested devices
ARM: BCM5301X: Add DT entry for SPI controller and NOR flash
Stefan Wahren (1):
ARM: bcm2835: add CPU node for ARM core
.../brcm,bcm2835-armctrl-ic.txt | 4 +-
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 4 ++
arch/arm/boot/dts/bcm2835-rpi-a.dts | 4 ++
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 4 ++
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 4 ++
arch/arm/boot/dts/bcm2835-rpi-b.dts | 4 ++
arch/arm/boot/dts/bcm2835-rpi.dtsi | 9 +++++
arch/arm/boot/dts/bcm2835.dtsi | 11 +++++
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 4 ++
arch/arm/boot/dts/bcm283x.dtsi | 47 ++++++++++++++++++++++
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 10 ++++-
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 6 ++-
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 17 +++-----
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 ++-
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 5 +++
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 8 ++++
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 ++-
arch/arm/boot/dts/bcm5301x.dtsi | 32 +++++++++++++++
drivers/gpu/drm/vc4/vc4_drv.c | 20 +++++++++
20 files changed, 188 insertions(+), 19 deletions(-)
More information about the linux-arm-kernel
mailing list