[PATCH v2 net-next 12/13] Documentation: Bindings: add port-idx-in-ae for enet node
Yisen Zhuang
Yisen.Zhuang at huawei.com
Sat Apr 23 02:05:16 PDT 2016
This patch adds description for port-idx-in-ae attribute.
Signed-off-by: Yisen Zhuang <yisen.zhuang at huawei.com>
---
.../devicetree/bindings/net/hisilicon-hns-nic.txt | 30 +++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
index e6a9d1c..b9ff4ba 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
@@ -36,6 +36,34 @@ Required properties:
| | | | | |
external port
+ This attribute is remained for compatible purpose. It is not recommended to
+ use it in new code.
+
+- port-idx-in-ae: is the index of port provided by AE.
+ In NIC mode of DSAF, all 6 PHYs of service DSAF are taken as ethernet ports
+ to the CPU. The port-idx-in-ae can be 0 to 5. Here is the diagram:
+ +-----+---------------+
+ | CPU |
+ +-+-+-+---+-+-+-+-+-+-+
+ | | | | | | | |
+ debug debug service
+ port port port
+ (0) (0) (0-5)
+
+ In Switch mode of DSAF, all 6 PHYs of service DSAF are taken as physical
+ ports connected to a LAN Switch while the CPU side assume itself have one
+ single NIC connected to this switch. In this case, the port-idx-in-ae
+ will be 0 only.
+ +-----+-----+------+------+
+ | CPU |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | | service| port(0)
+ debug debug +------------+
+ port port | switch |
+ (0) (0) +-+-+-+-+-+-++
+ | | | | | |
+ external port
+
- local-mac-address: mac addr of the ethernet interface
Example:
@@ -43,6 +71,6 @@ Example:
ethernet at 0{
compatible = "hisilicon,hns-nic-v1";
ae-handle = <&dsaf0>;
- port-id = <0>;
+ port-idx-in-ae = <0>;
local-mac-address = [a2 14 e4 4b 56 76];
};
--
1.9.1
More information about the linux-arm-kernel
mailing list