[PATCH v2 net-next 10/13] net: hns: add attribute port-mode-offset for dsaf port node
Yisen Zhuang
Yisen.Zhuang at huawei.com
Sat Apr 23 02:05:14 PDT 2016
Port mode offset for each dsaf port is different. The current code is not
so readability. This patch adds configuration named port-mode-offset to
make the code simple and more readability. If port-mode-offset isn't
exists, default value 0 will be used.
Signed-off-by: Daode Huang <huangdaode at hisilicon.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang at huawei.com>
---
change log:
PATCH v2:
- put DT bindings in separate patches.
PATCH v1:
- first submit
---
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 10 +++++
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h | 1 +
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 44 ++++++++++------------
3 files changed, 30 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 52d757d..1c8fdd3 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -665,6 +665,7 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb)
mac_cb->max_frm = MAC_DEFAULT_MTU;
mac_cb->tx_pause_frm_time = MAC_DEFAULT_PAUSE_TIME;
mac_cb->port_rst_off = mac_cb->mac_id;
+ mac_cb->port_mode_off = 0;
/* if the dsaf node doesn't contain a port subnode, get phy-handle
* from dsaf node
@@ -703,6 +704,15 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb)
mac_cb->mac_id);
}
+ ret = fwnode_property_read_u32(mac_cb->fw_port,
+ "port-mode-offset",
+ &mac_cb->port_mode_off);
+ if (ret) {
+ dev_dbg(mac_cb->dev,
+ "mac%d port-mode-offset not found, use default value.\n",
+ mac_cb->mac_id);
+ }
+
syscon = syscon_node_to_regmap(
of_parse_phandle(to_of_node(mac_cb->fw_port),
"cpld-syscon", 0));
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
index 7be7104..97ce9a7 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
@@ -319,6 +319,7 @@ struct hns_mac_cb {
struct regmap *cpld_ctrl;
u32 cpld_ctrl_reg;
u32 port_rst_off;
+ u32 port_mode_off;
struct mac_entry_idx addr_entry_idx[DSAF_MAX_VM_NUM];
u8 sfp_prsnt;
u8 cpld_led_value;
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
index e549a11..a837bb9 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
@@ -265,37 +265,31 @@ phy_interface_t hns_mac_get_phy_if(struct hns_mac_cb *mac_cb)
{
u32 mode;
u32 reg;
- u32 shift;
- u32 phy_offset;
bool is_ver1 = AE_IS_VER1(mac_cb->dsaf_dev->dsaf_ver);
int mac_id = mac_cb->mac_id;
- phy_interface_t phy_if = PHY_INTERFACE_MODE_NA;
+ phy_interface_t phy_if;
- if (is_ver1 && HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) {
- phy_if = PHY_INTERFACE_MODE_SGMII;
- } else if (mac_id >= 0 && mac_id <= 3 &&
- !HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) {
- reg = is_ver1 ? HNS_MAC_HILINK4_REG : HNS_MAC_HILINK4V2_REG;
- mode = dsaf_read_sub(mac_cb->dsaf_dev, reg);
- /* mac_id 0, 1, 2, 3 ---> hilink4 lane 0, 1, 2, 3 */
- shift = is_ver1 ? 0 : mac_id;
- if (dsaf_get_bit(mode, shift))
- phy_if = PHY_INTERFACE_MODE_XGMII;
+ if (is_ver1) {
+ if (HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev))
+ return PHY_INTERFACE_MODE_SGMII;
+
+ if (mac_id >= 0 && mac_id <= 3)
+ reg = HNS_MAC_HILINK4_REG;
else
- phy_if = PHY_INTERFACE_MODE_SGMII;
- } else {
- reg = is_ver1 ? HNS_MAC_HILINK3_REG : HNS_MAC_HILINK3V2_REG;
- mode = dsaf_read_sub(mac_cb->dsaf_dev, reg);
- /* mac_id 4, 5,---> hilink3 lane 2, 3
- * debug port 0(6), 1(7) ---> hilink3 lane 0, 1
- */
- phy_offset = mac_cb->dsaf_dev->reset_offset - 1;
- shift = is_ver1 ? 0 : mac_id >= 4 ? mac_id - 2 : phy_offset;
- if (dsaf_get_bit(mode, shift))
- phy_if = PHY_INTERFACE_MODE_XGMII;
+ reg = HNS_MAC_HILINK3_REG;
+ } else{
+ if (!HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev) && mac_id <= 3)
+ reg = HNS_MAC_HILINK4V2_REG;
else
- phy_if = PHY_INTERFACE_MODE_SGMII;
+ reg = HNS_MAC_HILINK3V2_REG;
}
+
+ mode = dsaf_read_sub(mac_cb->dsaf_dev, reg);
+ if (dsaf_get_bit(mode, mac_cb->port_mode_off))
+ phy_if = PHY_INTERFACE_MODE_XGMII;
+ else
+ phy_if = PHY_INTERFACE_MODE_SGMII;
+
return phy_if;
}
--
1.9.1
More information about the linux-arm-kernel
mailing list