[PATCH 10/11] arm64: tegra: Add clock properties on cpu0 for Tegra210

[Jon Hunter]

Hi Penny,

On 22/04/16 11:31, Penny Chiu wrote:
> Add clocks, clock-names, and clock-latency into cpu0 node.
> These properties will be used by cpufreq driver.
> 
> Signed-off-by: Penny Chiu <pchiu at nvidia.com>
> ---
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> index 204d9cd..1a85857 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> @@ -782,6 +782,12 @@
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a57";
>  			reg = <0>;
> +			clocks = <&tegra_car TEGRA210_CLK_CCLK_G>,
> +				 <&tegra_car TEGRA210_CLK_PLL_X>,
> +				 <&tegra_car TEGRA210_CLK_PLL_P_OUT4>,
> +				 <&dfll>;
> +			clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
> +			clock-latency = <300000>;
>  		};
>  
>  		cpu at 1 {
> 

Can you include a patch with this series to update the binding
documentation for the nvidia,tegra124-cpufreq.txt? I think that although
there is no specific nvidia,tegra210-cpufreq compatible string the
documentation should state that both tegra124 and tegra210 are supported
so it is clear.

Also I see the above binding no longer includes the "cpu_lp" for
tegra210 which I understand we don't use here. However, the binding
documentation should reflect this. Having said that, looking at the
driver it appears the "cpu_lp" clock is not even used for tegra124. I
wonder if we should drop this from the binding documentation and the
tegra124.dtsi altogether?

What about the "vdd-cpu-supply" property? Don't we need this?

Cheers
Jon