[PATCH] ARM64: dts: rockchip: add core dtsi file for RK3399 SoCs

Huang, Tao huangtao at rock-chips.com
Thu Apr 21 03:47:20 PDT 2016


Hi, Mark:
On 2016年04月21日 18:19, Mark Rutland wrote:
> On Thu, Apr 21, 2016 at 11:58:12AM +0800, Jianqun Xu wrote:
>> +		cpu_l0: cpu at 0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53", "arm,armv8";
>> +			reg = <0x0 0x0>;
>> +			enable-method = "psci";
>> +			#cooling-cells = <2>; /* min followed by max */
>> +			clocks = <&cru ARMCLKL>;
>> +		};
>> +		cpu_b0: cpu at 100 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a72", "arm,armv8";
>> +			reg = <0x0 0x100>;
>> +			enable-method = "psci";
>> +			#cooling-cells = <2>; /* min followed by max */
>> +			clocks = <&cru ARMCLKB>;
>> +		};
>> +
>> +	arm-pmu {
>> +		compatible = "arm,armv8-pmuv3";
>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>> +	};
> This is wrong, and must go. There should be a separate node for the PMU
> of each microarchitecture, with the appropriate compatible string to
> represent that (see the juno dts).
You are right. The first version we wrote is:
    pmu_a53 {
        compatible = "arm,cortex-a53-pmu";
        interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
        interrupt-affinity = <&cpu_l0>,
                     <&cpu_l1>,
                     <&cpu_l2>,
                     <&cpu_l3>;
    };

    pmu_a72 {
        compatible = "arm,cortex-a72-pmu";
        interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
        interrupt-affinity = <&cpu_b0>,
                     <&cpu_b1>;
    };
but unfortunately, the arm pmu driver do not support PPI in two cluster
well,
so we have to replace with this implementation.
> In this case things are messier as the same PPI number is being used
> across clusters. Marc (Cc'd) has been working on PPI partitions, which
> should allow us to support that.
Great! So what we can do right now? Wait this feature, and delete
arm-pmu node?

Thanks,
Huang, Tao




More information about the linux-arm-kernel mailing list