[PATCH v2 3/3] i2c: s3c2410: Cleanup indentation and comment style
Krzysztof Kozlowski
k.kozlowski at samsung.com
Thu Apr 21 00:04:51 PDT 2016
Improve the readability by:
- fixing indentation,
- switching to proper block comments,
- removing spurious blank lines,
- checkpatch: void function return statements are not generally useful,
- checkpatch: braces {} are not necessary for any arm of this
statement,
- checkpatch: missing a blank line after declarations.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Reviewed-by: Javier Martinez Canillas <javier at osg.samsung.com>
---
Changes since v1:
1. Add Javier's reviewed-by.
---
drivers/i2c/busses/i2c-s3c2410.c | 113 ++++++++++++++++++++-------------------
1 file changed, 57 insertions(+), 56 deletions(-)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index fd3695a921f1..70a9f0c1ebca 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -170,6 +170,7 @@ static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *p
{
if (pdev->dev.of_node) {
const struct of_device_id *match;
+
match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node);
return (kernel_ulong_t)match->data;
}
@@ -277,9 +278,10 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
writeb(addr, i2c->regs + S3C2410_IICDS);
- /* delay here to ensure the data byte has gotten onto the bus
- * before the transaction is started */
-
+ /*
+ * delay here to ensure the data byte has gotten onto the bus
+ * before the transaction is started
+ */
ndelay(i2c->tx_setup);
dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
@@ -354,8 +356,10 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
s3c24xx_i2c_disable_irq(i2c);
}
-/* helper functions to determine the current state in the set of
- * messages we are sending */
+/*
+ * helper functions to determine the current state in the set of
+ * messages we are sending
+ */
/*
* returns TRUE if the current message is the last in the set
@@ -370,9 +374,11 @@ static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
*/
static inline int is_msglast(struct s3c24xx_i2c *i2c)
{
- /* msg->len is always 1 for the first byte of smbus block read.
+ /*
+ * msg->len is always 1 for the first byte of smbus block read.
* Actual length will be read from slave. More bytes will be
- * read according to the length then. */
+ * read according to the length then.
+ */
if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
return 0;
@@ -408,14 +414,13 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
goto out_ack;
case STATE_START:
- /* last thing we did was send a start condition on the
+ /*
+ * last thing we did was send a start condition on the
* bus, or started a new i2c message
*/
-
if (iicstat & S3C2410_IICSTAT_LASTBIT &&
!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
/* ack was not received... */
-
dev_dbg(i2c->dev, "ack was not received\n");
s3c24xx_i2c_stop(i2c, -ENXIO);
goto out_ack;
@@ -426,9 +431,10 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
else
i2c->state = STATE_WRITE;
- /* terminate the transfer if there is nothing to do
- * as this is used by the i2c probe to find devices. */
-
+ /*
+ * Terminate the transfer if there is nothing to do
+ * as this is used by the i2c probe to find devices.
+ */
if (is_lastmsg(i2c) && i2c->msg->len == 0) {
s3c24xx_i2c_stop(i2c, 0);
goto out_ack;
@@ -437,14 +443,16 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
if (i2c->state == STATE_READ)
goto prepare_read;
- /* fall through to the write state, as we will need to
- * send a byte as well */
+ /*
+ * fall through to the write state, as we will need to
+ * send a byte as well
+ */
case STATE_WRITE:
- /* we are writing data to the device... check for the
+ /*
+ * we are writing data to the device... check for the
* end of the message, and if so, work out what to do
*/
-
if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
if (iicstat & S3C2410_IICSTAT_LASTBIT) {
dev_dbg(i2c->dev, "WRITE: No Ack\n");
@@ -460,12 +468,13 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
byte = i2c->msg->buf[i2c->msg_ptr++];
writeb(byte, i2c->regs + S3C2410_IICDS);
- /* delay after writing the byte to allow the
+ /*
+ * delay after writing the byte to allow the
* data setup time on the bus, as writing the
* data to the register causes the first bit
* to appear on SDA, and SCL will change as
- * soon as the interrupt is acknowledged */
-
+ * soon as the interrupt is acknowledged
+ */
ndelay(i2c->tx_setup);
} else if (!is_lastmsg(i2c)) {
@@ -481,10 +490,11 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
if (i2c->msg->flags & I2C_M_NOSTART) {
if (i2c->msg->flags & I2C_M_RD) {
- /* cannot do this, the controller
+ /*
+ * cannot do this, the controller
* forces us to send a new START
- * when we change direction */
-
+ * when we change direction
+ */
s3c24xx_i2c_stop(i2c, -EINVAL);
}
@@ -497,17 +507,16 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
} else {
/* send stop */
-
s3c24xx_i2c_stop(i2c, 0);
}
break;
case STATE_READ:
- /* we have a byte of data in the data register, do
+ /*
+ * we have a byte of data in the data register, do
* something with it, and then work out whether we are
* going to do any more read/write
*/
-
byte = readb(i2c->regs + S3C2410_IICDS);
i2c->msg->buf[i2c->msg_ptr++] = byte;
@@ -522,9 +531,10 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
s3c24xx_i2c_disable_ack(i2c);
} else if (is_msgend(i2c)) {
- /* ok, we've read the entire buffer, see if there
- * is anything else we need to do */
-
+ /*
+ * ok, we've read the entire buffer, see if there
+ * is anything else we need to do
+ */
if (is_lastmsg(i2c)) {
/* last message, send stop and complete */
dev_dbg(i2c->dev, "READ: Send Stop\n");
@@ -578,9 +588,10 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
goto out;
}
- /* pretty much this leaves us with the fact that we've
- * transmitted or received whatever byte we last sent */
-
+ /*
+ * pretty much this leaves us with the fact that we've
+ * transmitted or received whatever byte we last sent
+ */
i2c_s3c_irq_nextbyte(i2c, status);
out:
@@ -726,9 +737,10 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
ret = i2c->msg_idx;
- /* having these next two as dev_err() makes life very
- * noisy when doing an i2cdetect */
-
+ /*
+ * Having these next two as dev_err() makes life very
+ * noisy when doing an i2cdetect
+ */
if (timeout == 0)
dev_dbg(i2c->dev, "timeout\n");
else if (ret != num)
@@ -1071,10 +1083,7 @@ s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
}
#else
static void
-s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
-{
- return;
-}
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) { }
#endif
static int s3c24xx_i2c_probe(struct platform_device *pdev)
@@ -1117,7 +1126,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
init_waitqueue_head(&i2c->wait);
/* find the clock and enable it */
-
i2c->dev = &pdev->dev;
i2c->clk = devm_clk_get(&pdev->dev, "i2c");
if (IS_ERR(i2c->clk)) {
@@ -1127,9 +1135,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
-
/* map the registers */
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->regs = devm_ioremap_resource(&pdev->dev, res);
@@ -1140,22 +1146,17 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
i2c->regs, res);
/* setup info block for the i2c core */
-
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &pdev->dev;
-
i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
/* inititalise the i2c gpio lines */
-
- if (i2c->pdata->cfg_gpio) {
+ if (i2c->pdata->cfg_gpio)
i2c->pdata->cfg_gpio(to_platform_device(i2c->dev));
- } else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) {
+ else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c))
return -EINVAL;
- }
/* initialise the i2c controller */
-
clk_prepare_enable(i2c->clk);
ret = s3c24xx_i2c_init(i2c);
clk_disable(i2c->clk);
@@ -1164,10 +1165,11 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
clk_unprepare(i2c->clk);
return ret;
}
- /* find the IRQ for this unit (note, this relies on the init call to
+
+ /*
+ * find the IRQ for this unit (note, this relies on the init call to
* ensure no current IRQs pending
*/
-
if (!(i2c->quirks & QUIRK_POLL)) {
i2c->irq = ret = platform_get_irq(pdev, 0);
if (ret <= 0) {
@@ -1176,9 +1178,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
return ret;
}
- ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq, 0,
- dev_name(&pdev->dev), i2c);
-
+ ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq,
+ 0, dev_name(&pdev->dev), i2c);
if (ret != 0) {
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
clk_unprepare(i2c->clk);
@@ -1193,12 +1194,12 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
return ret;
}
- /* Note, previous versions of the driver used i2c_add_adapter()
+ /*
+ * Note, previous versions of the driver used i2c_add_adapter()
* to add the bus at any number. We now pass the bus number via
* the platform data, so if unset it will now default to always
* being bus 0.
*/
-
i2c->adap.nr = i2c->pdata->bus_num;
i2c->adap.dev.of_node = pdev->dev.of_node;
--
1.9.1
More information about the linux-arm-kernel
mailing list