[PATCH v4 1/5] ACPI / processor_idle: introduce ARCH_SUPPORTS_ACPI_PROCESSOR_CSTATE

Vikas Sajjan sajjan.linux at gmail.com
Wed Apr 20 02:56:48 PDT 2016


Hi Sudeep,

On Tue, Apr 19, 2016 at 6:00 PM, Sudeep Holla <sudeep.holla at arm.com> wrote:
> ACPI 6.0 adds a new method to specify the CPU idle states(C-states)
> called Low Power Idle(LPI) states. Since new architectures like ARM64
> use only LPIs, introduce ARCH_SUPPORTS_ACPI_PROCESSOR_CSTATE to
> encapsulate all the code supporting the old style C-states(_CST)
>
> This patch will help to extend the processor_idle module to support
> LPI.
>
> Cc: x86 at kernel.org
> Cc: linux-ia64 at vger.kernel.org
> Cc: "Rafael J. Wysocki" <rjw at rjwysocki.net>
> Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
> ---
>  arch/ia64/Kconfig             |  1 +
>  arch/x86/Kconfig              |  1 +
>  drivers/acpi/Kconfig          |  3 ++
>  drivers/acpi/processor_idle.c | 74 +++++++++++++++++++++++++++++--------------
>  include/acpi/processor.h      |  3 +-
>  5 files changed, 57 insertions(+), 25 deletions(-)
>
> diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
> index b534ebab36ea..717de2a146e2 100644
> --- a/arch/ia64/Kconfig
> +++ b/arch/ia64/Kconfig
> @@ -16,6 +16,7 @@ config IA64
>         select PCI if (!IA64_HP_SIM)
>         select ACPI if (!IA64_HP_SIM)
>         select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
> +       select ARCH_SUPPORTS_ACPI_PROCESSOR_CSTATE if ACPI
>         select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
>         select HAVE_UNSTABLE_SCHED_CLOCK
>         select HAVE_IDE
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 2dc18605831f..eb03fd0d63b9 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -37,6 +37,7 @@ config X86
>         select ARCH_MIGHT_HAVE_ACPI_PDC         if ACPI
>         select ARCH_MIGHT_HAVE_PC_PARPORT
>         select ARCH_MIGHT_HAVE_PC_SERIO
> +       select ARCH_SUPPORTS_ACPI_PROCESSOR_CSTATE if ACPI
>         select ARCH_SUPPORTS_ATOMIC_RMW
>         select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
>         select ARCH_SUPPORTS_INT128             if X86_64
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 82b96ee8624c..ec289078667c 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -48,6 +48,9 @@ config ACPI_LEGACY_TABLES_LOOKUP
>  config ARCH_MIGHT_HAVE_ACPI_PDC
>         bool
>
> +config ARCH_SUPPORTS_ACPI_PROCESSOR_CSTATE
> +       bool
> +
>  config ACPI_GENERIC_GSI
>         bool
>
> diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
> index 444e3745c8b3..1f3fe54194b5 100644
> --- a/drivers/acpi/processor_idle.c
> +++ b/drivers/acpi/processor_idle.c
> @@ -59,6 +59,12 @@ module_param(latency_factor, uint, 0644);
>
>  static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
>
> +struct cpuidle_driver acpi_idle_driver = {
> +       .name =         "acpi_idle",
> +       .owner =        THIS_MODULE,
> +};
> +
> +#ifdef CONFIG_ARCH_SUPPORTS_ACPI_PROCESSOR_CSTATE
>  static
>  DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], acpi_cstate);
>
> @@ -804,11 +810,6 @@ static void acpi_idle_enter_freeze(struct cpuidle_device *dev,
>         acpi_idle_do_entry(cx);
>  }
>
> -struct cpuidle_driver acpi_idle_driver = {
> -       .name =         "acpi_idle",
> -       .owner =        THIS_MODULE,
> -};
> -
>  /**
>   * acpi_processor_setup_cpuidle_cx - prepares and configures CPUIDLE
>   * device i.e. per-cpu data
> @@ -925,6 +926,49 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
>         return 0;
>  }
>
> +static inline void acpi_processor_cstate_first_run_checks(void)
> +{
> +       static int first_run;
> +
> +       if (first_run)
> +               return;
> +       dmi_check_system(processor_power_dmi_table);
> +       max_cstate = acpi_processor_cstate_check(max_cstate);
> +       if (max_cstate < ACPI_C_STATES_MAX)
> +               pr_notice("ACPI: processor limited to max C-state %d\n",
> +                         max_cstate);
> +       first_run++;
> +
> +       if (acpi_gbl_FADT.cst_control && !nocst) {
> +               status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
> +                                           acpi_gbl_FADT.cst_control, 8);
> +               if (ACPI_FAILURE(status))
> +                       ACPI_EXCEPTION((AE_INFO, status,
> +                                       "Notifying BIOS of _CST ability failed"));
> +       }
> +}
> +#else
> +
> +static inline int disabled_by_idle_boot_param(void) { return 0; }
> +static inline void acpi_processor_cstate_first_run_checks(void) { }
> +static int acpi_processor_get_power_info(struct acpi_processor *pr)
> +{
> +       return -ENODEV;
> +}
> +
> +static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
> +                                          struct cpuidle_device *dev)
> +{
> +       return -EINVAL;
> +}
> +
> +static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
> +{
> +       return -EINVAL;
> +}
> +
> +#endif
> +
>  int acpi_processor_hotplug(struct acpi_processor *pr)
>  {
>         int ret = 0;
> @@ -1018,29 +1062,11 @@ int acpi_processor_power_init(struct acpi_processor *pr)
>         acpi_status status;
>         int retval;
>         struct cpuidle_device *dev;
> -       static int first_run;
>
>         if (disabled_by_idle_boot_param())
>                 return 0;
>
> -       if (!first_run) {
> -               dmi_check_system(processor_power_dmi_table);
> -               max_cstate = acpi_processor_cstate_check(max_cstate);
> -               if (max_cstate < ACPI_C_STATES_MAX)
> -                       printk(KERN_NOTICE
> -                              "ACPI: processor limited to max C-state %d\n",
> -                              max_cstate);
> -               first_run++;
> -       }
> -
> -       if (acpi_gbl_FADT.cst_control && !nocst) {
> -               status =
> -                   acpi_os_write_port(acpi_gbl_FADT.smi_command, acpi_gbl_FADT.cst_control, 8);
> -               if (ACPI_FAILURE(status)) {
> -                       ACPI_EXCEPTION((AE_INFO, status,
> -                                       "Notifying BIOS of _CST ability failed"));
> -               }
> -       }
> +       acpi_processor_cstate_first_run_checks();
>
>         acpi_processor_get_power_info(pr);
>         pr->flags.power_setup_done = 1;

Not related to your change,
The acpi_processor_get_power_info() function can return failure, so i
thought it makes sense to check for the return value
and then set the  flag pr->flags.power_setup_done appropriately.


> diff --git a/include/acpi/processor.h b/include/acpi/processor.h
> index 6f1805dd5d3c..50f2423d31fa 100644
> --- a/include/acpi/processor.h
> +++ b/include/acpi/processor.h
> @@ -242,7 +242,8 @@ extern int acpi_processor_get_performance_info(struct acpi_processor *pr);
>  DECLARE_PER_CPU(struct acpi_processor *, processors);
>  extern struct acpi_processor_errata errata;
>
> -#ifdef ARCH_HAS_POWER_INIT
> +#if defined(ARCH_HAS_POWER_INIT) && \
> +       defined(CONFIG_ARCH_SUPPORTS_ACPI_PROCESSOR_CSTATE)
>  void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
>                                         unsigned int cpu);
>  int acpi_processor_ffh_cstate_probe(unsigned int cpu,
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



More information about the linux-arm-kernel mailing list