[PATCH v6 3/4] soc: mediatek: Add MT2701 power dt-bindings

[James Liao]

Hi Yingjoe,

On Fri, 2016-04-15 at 22:42 +0800, Yingjoe Chen wrote:
> On Fri, 2016-04-15 at 10:02 +0800, James Liao wrote:
> > On Thu, 2016-04-14 at 18:56 +0800, Yingjoe Chen wrote:
> > > On Thu, 2016-04-14 at 16:16 +0800, James Liao wrote:
> > > > From: Shunli Wang <shunli.wang at mediatek.com>
> > > > 
> > > > Add power dt-bindings for MT2701.
> > > > 
> > > > Signed-off-by: Shunli Wang <shunli.wang at mediatek.com>
> > > > Signed-off-by: James Liao <jamesjj.liao at mediatek.com>
> > > > Acked-by: Rob Herring <robh at kernel.org>
> > > > Reviewed-by: Kevin Hilman <khilman at baylibre.com>
> > > > ---
> > > >  .../devicetree/bindings/soc/mediatek/scpsys.txt    | 12 ++++++----
> > > >  include/dt-bindings/power/mt2701-power.h           | 27 ++++++++++++++++++++++
> > > >  2 files changed, 34 insertions(+), 5 deletions(-)
> > > >  create mode 100644 include/dt-bindings/power/mt2701-power.h
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
> > > > index e8f15e3..ebb3144 100644
> > > > --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
> > > > +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
> > > > @@ -9,17 +9,19 @@ domain control.
> > > >  
> > > >  The driver implements the Generic PM domain bindings described in
> > > >  power/power_domain.txt. It provides the power domains defined in
> > > > -include/dt-bindings/power/mt8173-power.h.
> > > > +include/dt-bindings/power/mt8173-power.h and mt2701-power.h.
> > > >  
> > > >  Required properties:
> > > > -- compatible: Must be "mediatek,mt8173-scpsys"
> > > > +- compatible: Should be one of:
> > > > +	- "mediatek,mt2701-scpsys"
> > > > +	- "mediatek,mt8173-scpsys"
> > > >  - #power-domain-cells: Must be 1
> > > >  - reg: Address range of the SCPSYS unit
> > > >  - infracfg: must contain a phandle to the infracfg controller
> > > >  - clock, clock-names: clocks according to the common clock binding.
> > > > -                      The clocks needed "mm", "mfg", "venc" and "venc_lt".
> > > > -		      These are the clocks which hardware needs to be enabled
> > > > -		      before enabling certain power domains.
> > > > +                      The clocks needed "mm", "mfg", "venc", "venc_lt" and
> > > > +                      "ethif". These are the clocks which hardware needs to be
> > > > +                      enabled before enabling certain power domains.
> > > 
> > > 
> > > Clock ethif only exist on mt2701 so it is not required on mt8173.
> > 
> > You are right. Each SoC needs different clock for each power domain.
> > Here list all subsystems of available SoCs.
> 
> Binding should list required clocks for each specific platform. How
> about this:
> 
> - clock, clock-names: clocks according to the common clock binding.
> 		      These are the clocks which hardware needs to be
>                       enabled before enabling certain power domains.
>   	Required clocks for mt2701: "mm", "mfg", "ethif"
> 	Required clocks for mt8173: "mm", "mfg", "venc", "venc_lt"

OK. I'll follow your suggestion in next patch.


Best regards,

James