[PATCH v1] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode

[Ivaylo Dimitrov]

Without that, regulators are left in the mode last set by the bootloader or
by the kernel the device was rebooted from. This leads to various problems,
like non-working peripherals.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75 at gmail.com>
---
 arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b3c26a9..d9e2d9c 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -329,6 +329,7 @@
 	regulator-name = "V28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on; /* due to battery cover sensor */
 };
 
@@ -336,30 +337,35 @@
 	regulator-name = "VCSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux3 {
 	regulator-name = "VMMC2_30";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux4 {
 	regulator-name = "VCAM_ANA_28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc1 {
 	regulator-name = "VMMC1";
 	regulator-min-microvolt = <1850000>;
 	regulator-max-microvolt = <3150000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc2 {
 	regulator-name = "V28_A";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on; /* due VIO leak to AIC34 VDDs */
 };
 
@@ -367,6 +373,7 @@
 	regulator-name = "VPLL";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on;
 };
 
@@ -374,6 +381,7 @@
 	regulator-name = "VSDI_CSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on;
 };
 
@@ -381,6 +389,7 @@
 	regulator-name = "VMMC2_IO_18";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vio {
-- 
1.9.1