[PATCH v2 5/5] iio: gyro: bmg160: use regmap to retrieve struct device

Jonathan Cameron jic23 at kernel.org
Sat Apr 16 12:24:07 PDT 2016


On 10/04/16 20:08, Alison Schofield wrote:
> Driver includes struct regmap and struct device in its global data.
> Remove the struct device and use regmap API to retrieve device info.
> 
> Patch created using Coccinelle plus manual edits.
> 
> Signed-off-by: Alison Schofield <amsfield22 at gmail.com>
Cc'd Srinivas

Actually I'm curious as to why linux-arm-kernel and linux-samsung-soc are cc'd?
Not terribly relevant lists...
> ---
>  drivers/iio/gyro/bmg160_core.c | 86 +++++++++++++++++++++---------------------
>  1 file changed, 44 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
> index 2493bb1..b2b1071 100644
> --- a/drivers/iio/gyro/bmg160_core.c
> +++ b/drivers/iio/gyro/bmg160_core.c
> @@ -95,7 +95,6 @@
>  #define BMG160_AUTO_SUSPEND_DELAY_MS	2000
>  
>  struct bmg160_data {
> -	struct device *dev;
>  	struct regmap *regmap;
>  	struct iio_trigger *dready_trig;
>  	struct iio_trigger *motion_trig;
> @@ -137,11 +136,12 @@ static const struct {
>  
>  static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
>  {
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  
>  	ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error writing reg_pmu_lpw\n");
> +		dev_err(dev, "Error writing reg_pmu_lpw\n");
>  		return ret;
>  	}
>  
> @@ -162,6 +162,7 @@ static int bmg160_convert_freq_to_bit(int val)
>  
>  static int bmg160_set_bw(struct bmg160_data *data, int val)
>  {
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  	int bw_bits;
>  
> @@ -171,7 +172,7 @@ static int bmg160_set_bw(struct bmg160_data *data, int val)
>  
>  	ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error writing reg_pmu_bw\n");
> +		dev_err(dev, "Error writing reg_pmu_bw\n");
>  		return ret;
>  	}
>  
> @@ -182,18 +183,19 @@ static int bmg160_set_bw(struct bmg160_data *data, int val)
>  
>  static int bmg160_chip_init(struct bmg160_data *data)
>  {
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  	unsigned int val;
>  
>  	ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error reading reg_chip_id\n");
> +		dev_err(dev, "Error reading reg_chip_id\n");
>  		return ret;
>  	}
>  
> -	dev_dbg(data->dev, "Chip Id %x\n", val);
> +	dev_dbg(dev, "Chip Id %x\n", val);
>  	if (val != BMG160_CHIP_ID_VAL) {
> -		dev_err(data->dev, "invalid chip %x\n", val);
> +		dev_err(dev, "invalid chip %x\n", val);
>  		return -ENODEV;
>  	}
>  
> @@ -212,14 +214,14 @@ static int bmg160_chip_init(struct bmg160_data *data)
>  	/* Set Default Range */
>  	ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error writing reg_range\n");
> +		dev_err(dev, "Error writing reg_range\n");
>  		return ret;
>  	}
>  	data->dps_range = BMG160_RANGE_500DPS;
>  
>  	ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error reading reg_slope_thres\n");
> +		dev_err(dev, "Error reading reg_slope_thres\n");
>  		return ret;
>  	}
>  	data->slope_thres = val;
> @@ -228,7 +230,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
>  	ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1,
>  				 BMG160_INT1_BIT_OD, 0);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error updating bits in reg_int_en_1\n");
> +		dev_err(dev, "Error updating bits in reg_int_en_1\n");
>  		return ret;
>  	}
>  
> @@ -236,7 +238,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
>  			   BMG160_INT_MODE_LATCH_INT |
>  			   BMG160_INT_MODE_LATCH_RESET);
>  	if (ret < 0) {
> -		dev_err(data->dev,
> +		dev_err(dev,
>  			"Error writing reg_motion_intr\n");
>  		return ret;
>  	}
> @@ -247,20 +249,21 @@ static int bmg160_chip_init(struct bmg160_data *data)
>  static int bmg160_set_power_state(struct bmg160_data *data, bool on)
>  {
>  #ifdef CONFIG_PM
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  
>  	if (on)
> -		ret = pm_runtime_get_sync(data->dev);
> +		ret = pm_runtime_get_sync(dev);
>  	else {
> -		pm_runtime_mark_last_busy(data->dev);
> -		ret = pm_runtime_put_autosuspend(data->dev);
> +		pm_runtime_mark_last_busy(dev);
> +		ret = pm_runtime_put_autosuspend(dev);
>  	}
>  
>  	if (ret < 0) {
> -		dev_err(data->dev,
> -			"Failed: bmg160_set_power_state for %d\n", on);
> +		dev_err(dev, "Failed: bmg160_set_power_state for %d\n", on);
> +
>  		if (on)
> -			pm_runtime_put_noidle(data->dev);
> +			pm_runtime_put_noidle(dev);
>  
>  		return ret;
>  	}
> @@ -272,6 +275,7 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on)
>  static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
>  					     bool status)
>  {
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  
>  	/* Enable/Disable INT_MAP0 mapping */
> @@ -279,7 +283,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
>  				 BMG160_INT_MAP_0_BIT_ANY,
>  				 (status ? BMG160_INT_MAP_0_BIT_ANY : 0));
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error updating bits reg_int_map0\n");
> +		dev_err(dev, "Error updating bits reg_int_map0\n");
>  		return ret;
>  	}
>  
> @@ -289,8 +293,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
>  		ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES,
>  				   data->slope_thres);
>  		if (ret < 0) {
> -			dev_err(data->dev,
> -				"Error writing reg_slope_thres\n");
> +			dev_err(dev, "Error writing reg_slope_thres\n");
>  			return ret;
>  		}
>  
> @@ -298,8 +301,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
>  				   BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y |
>  				   BMG160_INT_MOTION_Z);
>  		if (ret < 0) {
> -			dev_err(data->dev,
> -				"Error writing reg_motion_intr\n");
> +			dev_err(dev, "Error writing reg_motion_intr\n");
>  			return ret;
>  		}
>  
> @@ -314,8 +316,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
>  					   BMG160_INT_MODE_LATCH_INT |
>  					   BMG160_INT_MODE_LATCH_RESET);
>  			if (ret < 0) {
> -				dev_err(data->dev,
> -					"Error writing reg_rst_latch\n");
> +				dev_err(dev, "Error writing reg_rst_latch\n");
>  				return ret;
>  			}
>  		}
> @@ -328,7 +329,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
>  	}
>  
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error writing reg_int_en0\n");
> +		dev_err(dev, "Error writing reg_int_en0\n");
>  		return ret;
>  	}
>  
> @@ -338,6 +339,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
>  static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
>  					   bool status)
>  {
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  
>  	/* Enable/Disable INT_MAP1 mapping */
> @@ -345,7 +347,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
>  				 BMG160_INT_MAP_1_BIT_NEW_DATA,
>  				 (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error updating bits in reg_int_map1\n");
> +		dev_err(dev, "Error updating bits in reg_int_map1\n");
>  		return ret;
>  	}
>  
> @@ -354,9 +356,8 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
>  				   BMG160_INT_MODE_NON_LATCH_INT |
>  				   BMG160_INT_MODE_LATCH_RESET);
>  		if (ret < 0) {
> -			dev_err(data->dev,
> -				"Error writing reg_rst_latch\n");
> -				return ret;
> +			dev_err(dev, "Error writing reg_rst_latch\n");
> +			return ret;
>  		}
>  
>  		ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
> @@ -368,16 +369,15 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
>  				   BMG160_INT_MODE_LATCH_INT |
>  				   BMG160_INT_MODE_LATCH_RESET);
>  		if (ret < 0) {
> -			dev_err(data->dev,
> -				"Error writing reg_rst_latch\n");
> -				return ret;
> +			dev_err(dev, "Error writing reg_rst_latch\n");
> +			return ret;
>  		}
>  
>  		ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
>  	}
>  
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error writing reg_int_en0\n");
> +		dev_err(dev, "Error writing reg_int_en0\n");
>  		return ret;
>  	}
>  
> @@ -400,6 +400,7 @@ static int bmg160_get_bw(struct bmg160_data *data, int *val)
>  
>  static int bmg160_set_scale(struct bmg160_data *data, int val)
>  {
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret, i;
>  
>  	for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
> @@ -407,8 +408,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val)
>  			ret = regmap_write(data->regmap, BMG160_REG_RANGE,
>  					   bmg160_scale_table[i].dps_range);
>  			if (ret < 0) {
> -				dev_err(data->dev,
> -					"Error writing reg_range\n");
> +				dev_err(dev, "Error writing reg_range\n");
>  				return ret;
>  			}
>  			data->dps_range = bmg160_scale_table[i].dps_range;
> @@ -421,6 +421,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val)
>  
>  static int bmg160_get_temp(struct bmg160_data *data, int *val)
>  {
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  	unsigned int raw_val;
>  
> @@ -433,7 +434,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
>  
>  	ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error reading reg_temp\n");
> +		dev_err(dev, "Error reading reg_temp\n");
>  		bmg160_set_power_state(data, false);
>  		mutex_unlock(&data->mutex);
>  		return ret;
> @@ -450,6 +451,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
>  
>  static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
>  {
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  	unsigned int raw_val;
>  
> @@ -463,7 +465,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
>  	ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
>  			       2);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error reading axis %d\n", axis);
> +		dev_err(dev, "Error reading axis %d\n", axis);
>  		bmg160_set_power_state(data, false);
>  		mutex_unlock(&data->mutex);
>  		return ret;
> @@ -793,6 +795,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig)
>  {
>  	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
>  	struct bmg160_data *data = iio_priv(indio_dev);
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  
>  	/* new data interrupts don't need ack */
> @@ -804,7 +807,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig)
>  			   BMG160_INT_MODE_LATCH_INT |
>  			   BMG160_INT_MODE_LATCH_RESET);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error writing reg_rst_latch\n");
> +		dev_err(dev, "Error writing reg_rst_latch\n");
>  		return ret;
>  	}
>  
> @@ -864,13 +867,14 @@ static irqreturn_t bmg160_event_handler(int irq, void *private)
>  {
>  	struct iio_dev *indio_dev = private;
>  	struct bmg160_data *data = iio_priv(indio_dev);
> +	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
>  	int dir;
>  	unsigned int val;
>  
>  	ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val);
>  	if (ret < 0) {
> -		dev_err(data->dev, "Error reading reg_int_status2\n");
> +		dev_err(dev, "Error reading reg_int_status2\n");
>  		goto ack_intr_status;
>  	}
>  
> @@ -907,8 +911,7 @@ ack_intr_status:
>  				   BMG160_INT_MODE_LATCH_INT |
>  				   BMG160_INT_MODE_LATCH_RESET);
>  		if (ret < 0)
> -			dev_err(data->dev,
> -				"Error writing reg_rst_latch\n");
> +			dev_err(dev, "Error writing reg_rst_latch\n");
>  	}
>  
>  	return IRQ_HANDLED;
> @@ -976,7 +979,6 @@ int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
>  
>  	data = iio_priv(indio_dev);
>  	dev_set_drvdata(dev, indio_dev);
> -	data->dev = dev;
>  	data->irq = irq;
>  	data->regmap = regmap;
>  
> @@ -1139,7 +1141,7 @@ static int bmg160_runtime_suspend(struct device *dev)
>  
>  	ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
>  	if (ret < 0) {
> -		dev_err(data->dev, "set mode failed\n");
> +		dev_err(dev, "set mode failed\n");
>  		return -EAGAIN;
>  	}
>  
> 




More information about the linux-arm-kernel mailing list