[PATCH 2/2] clk: sunxi: add prediv table for a31 ahb1 clock
Vishnu Patekar
vishnupatekar0510 at gmail.com
Sat Apr 16 11:55:06 PDT 2016
For ahb1 clock, move mshift and mwidth to parent specific width and shift.
getter differentiates parents with prediv, with non-zero prediv width.
Also, removed unused ahb1 recalc function, it's now handled in generic
factors recalc.
Signed-off-by: Vishnu Patekar <vishnupatekar0510 at gmail.com>
---
drivers/clk/sunxi/clk-sunxi.c | 31 +++++++++----------------------
1 file changed, 9 insertions(+), 22 deletions(-)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 91de0a0..5a5f26b 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -282,8 +282,6 @@ static void sun5i_a13_get_ahb_factors(struct factors_request *req)
req->p = div;
}
-#define SUN6I_AHB1_PARENT_PLL6 3
-
/**
* sun6i_a31_get_ahb_factors() - calculates m, p factors for AHB
* AHB rate is calculated as follows
@@ -307,7 +305,7 @@ static void sun6i_get_ahb1_factors(struct factors_request *req)
div = DIV_ROUND_UP(req->parent_rate, req->rate);
/* calculate pre-divider if parent is pll6 */
- if (req->parent_index == SUN6I_AHB1_PARENT_PLL6) {
+ if (req->prediv_width) {
if (div < 4)
calcp = 0;
else if (div / 2 < 4)
@@ -329,22 +327,6 @@ static void sun6i_get_ahb1_factors(struct factors_request *req)
}
/**
- * sun6i_ahb1_recalc() - calculates AHB clock rate from m, p factors and
- * parent index
- */
-static void sun6i_ahb1_recalc(struct factors_request *req)
-{
- req->rate = req->parent_rate;
-
- /* apply pre-divider first if parent is pll6 */
- if (req->parent_index == SUN6I_AHB1_PARENT_PLL6)
- req->rate /= req->m + 1;
-
- /* clk divider */
- req->rate >>= req->p;
-}
-
-/**
* sun4i_get_apb1_factors() - calculates m, p factors for APB1
* APB1 rate is calculated as follows
* rate = (parent_rate >> p) / (m + 1);
@@ -474,12 +456,17 @@ static const struct clk_factors_config sun5i_a13_ahb_config = {
};
static const struct clk_factors_config sun6i_ahb1_config = {
- .mshift = 6,
- .mwidth = 2,
.pshift = 4,
.pwidth = 2,
};
+static const struct clk_factors_prediv sun6i_ahb1_prediv[] = {
+ {.parent_index = 0, .shift = 0, .width = 0 }, /* LOSC */
+ {.parent_index = 1, .shift = 0, .width = 0 }, /* OSC24MHz */
+ {.parent_index = 2, .shift = 0, .width = 0 }, /* AXI */
+ {.parent_index = 3, .shift = 6, .width = 2 } /* PLL6/Pre_div */
+};
+
static const struct clk_factors_config sun4i_apb1_config = {
.mshift = 0,
.mwidth = 5,
@@ -551,8 +538,8 @@ static const struct factors_data sun6i_ahb1_data __initconst = {
.mux = 12,
.muxmask = BIT(1) | BIT(0),
.table = &sun6i_ahb1_config,
+ .prediv_table = sun6i_ahb1_prediv,
.getter = sun6i_get_ahb1_factors,
- .recalc = sun6i_ahb1_recalc,
};
static const struct factors_data sun4i_apb1_data __initconst = {
--
1.9.1
More information about the linux-arm-kernel
mailing list