[PATCH] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode

Ivaylo Dimitrov ivo.g.dimitrov.75 at gmail.com
Fri Apr 15 23:37:23 PDT 2016


Without that, regulators are left in the mode last set by the bootloader or
by the kernel the device was rebooted from. This leads to various problems
like non-working peripherals.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75 at gmail.com>
---
 arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b3c26a9..1bb36e2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -329,6 +329,7 @@
 	regulator-name = "V28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>;
 	regulator-always-on; /* due to battery cover sensor */
 };
 
@@ -336,30 +337,35 @@
 	regulator-name = "VCSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>;
 };
 
 &vaux3 {
 	regulator-name = "VMMC2_30";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>;
 };
 
 &vaux4 {
 	regulator-name = "VCAM_ANA_28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>;
 };
 
 &vmmc1 {
 	regulator-name = "VMMC1";
 	regulator-min-microvolt = <1850000>;
 	regulator-max-microvolt = <3150000>;
+	regulator-initial-mode = <0x0e>;
 };
 
 &vmmc2 {
 	regulator-name = "V28_A";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>;
 	regulator-always-on; /* due VIO leak to AIC34 VDDs */
 };
 
@@ -367,6 +373,7 @@
 	regulator-name = "VPLL";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>;
 	regulator-always-on;
 };
 
@@ -374,6 +381,7 @@
 	regulator-name = "VSDI_CSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>;
 	regulator-always-on;
 };
 
@@ -381,6 +389,7 @@
 	regulator-name = "VMMC2_IO_18";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>;
 };
 
 &vio {
-- 
1.9.1




More information about the linux-arm-kernel mailing list