[PATCH v3 1/2] mfd: mt6397: irq domain should initialize before mfd_add_devices()
Henry Chen
henryc.chen at mediatek.com
Fri Apr 15 01:30:29 PDT 2016
Some sub driver like RTC module need irq domain from parent to create
irq mapping when driver initialize. so move mt6397_irq_init() before
mfd_add_devices().
Acked-by: John Crispin <blogic at openwrt.org>
Signed-off-by: Henry Chen <henryc.chen at mediatek.com>
---
This series fixed the below warning based on "Linux kernel v4.6-rc1"
WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471
irq_create_mapping+0xc4/0xd0
Changes in V2: Add two patch for error handle checking.
Changes in V3: Add interrupt as required properties to dt-bindings doc
---
drivers/mfd/mt6397-core.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 8e8d932..b2faf56 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -267,15 +267,23 @@ static int mt6397_probe(struct platform_device *pdev)
ret = regmap_read(pmic->regmap, MT6397_CID, &id);
if (ret) {
dev_err(pmic->dev, "Failed to read chip id: %d\n", ret);
- goto fail_irq;
+ return ret;
}
+ pmic->irq = platform_get_irq(pdev, 0);
+ if (pmic->irq <= 0)
+ return pmic->irq;
+
switch (id & 0xff) {
case MT6323_CID_CODE:
pmic->int_con[0] = MT6323_INT_CON0;
pmic->int_con[1] = MT6323_INT_CON1;
pmic->int_status[0] = MT6323_INT_STATUS0;
pmic->int_status[1] = MT6323_INT_STATUS1;
+ ret = mt6397_irq_init(pmic);
+ if (ret)
+ return ret;
+
ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs,
ARRAY_SIZE(mt6323_devs), NULL, 0, NULL);
break;
@@ -286,6 +294,10 @@ static int mt6397_probe(struct platform_device *pdev)
pmic->int_con[1] = MT6397_INT_CON1;
pmic->int_status[0] = MT6397_INT_STATUS0;
pmic->int_status[1] = MT6397_INT_STATUS1;
+ ret = mt6397_irq_init(pmic);
+ if (ret)
+ return ret;
+
ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs,
ARRAY_SIZE(mt6397_devs), NULL, 0, NULL);
break;
@@ -296,14 +308,6 @@ static int mt6397_probe(struct platform_device *pdev)
break;
}
- pmic->irq = platform_get_irq(pdev, 0);
- if (pmic->irq > 0) {
- ret = mt6397_irq_init(pmic);
- if (ret)
- return ret;
- }
-
-fail_irq:
if (ret) {
irq_domain_remove(pmic->irq_domain);
dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);
--
1.8.1.1.dirty
More information about the linux-arm-kernel
mailing list