[PATCH v5 05/24] input: misc: max77693: use pwm_get_args() where appropriate
Boris Brezillon
boris.brezillon at free-electrons.com
Thu Apr 14 12:17:25 PDT 2016
The PWM framework has clarified the concept of reference PWM config
(the platform dependent config retrieved from the DT or the PWM
lookup table) and real PWM state.
Use pwm_get_args() when the PWM user wants to retrieve this reference
config and not the current state.
This is part of the rework allowing the PWM framework to support
hardware readout and expose real PWM state even when the PWM has
just been requested (before the user calls pwm_config/enable/disable()).
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
drivers/input/misc/max77693-haptic.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c
index 6d96bff..29ddeb7 100644
--- a/drivers/input/misc/max77693-haptic.c
+++ b/drivers/input/misc/max77693-haptic.c
@@ -70,10 +70,13 @@ struct max77693_haptic {
static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic)
{
- int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2;
+ struct pwm_args pargs;
+ int delta;
int error;
- error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period);
+ pwm_get_args(haptic->pwm_dev, &pargs);
+ delta = (pargs.period + haptic->pwm_duty) / 2;
+ error = pwm_config(haptic->pwm_dev, delta, pargs.period);
if (error) {
dev_err(haptic->dev, "failed to configure pwm: %d\n", error);
return error;
@@ -234,6 +237,7 @@ static int max77693_haptic_play_effect(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
struct max77693_haptic *haptic = input_get_drvdata(dev);
+ struct pwm_args pargs;
u64 period_mag_multi;
haptic->magnitude = effect->u.rumble.strong_magnitude;
@@ -245,7 +249,8 @@ static int max77693_haptic_play_effect(struct input_dev *dev, void *data,
* The formula to convert magnitude to pwm_duty as follows:
* - pwm_duty = (magnitude * pwm_period) / MAX_MAGNITUDE(0xFFFF)
*/
- period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude;
+ pwm_get_args(haptic->pwm_dev, &pargs);
+ period_mag_multi = (u64)pargs.period * haptic->magnitude;
haptic->pwm_duty = (unsigned int)(period_mag_multi >>
MAX_MAGNITUDE_SHIFT);
@@ -329,6 +334,12 @@ static int max77693_haptic_probe(struct platform_device *pdev)
return PTR_ERR(haptic->pwm_dev);
}
+ /*
+ * FIXME: pwm_apply_args() should be removed when switching to the
+ * atomic PWM API.
+ */
+ pwm_apply_args(haptic->pwm_dev);
+
haptic->motor_reg = devm_regulator_get(&pdev->dev, "haptic");
if (IS_ERR(haptic->motor_reg)) {
dev_err(&pdev->dev, "failed to get regulator\n");
--
2.5.0
More information about the linux-arm-kernel
mailing list