[PATCH] i2c: designware-platdrv: implement bus recovery
Jisheng Zhang
jszhang at marvell.com
Thu Apr 14 07:04:56 PDT 2016
Implement bus recovery methods for i2c designware so we can recover
from situations where SCL/SDA are stuck low.
The recovery method is similar as i2c-imx: "config the i2c pinctrl to
gpio mode by calling pinctrl sleep set function, and then use GPIO to
emulate the i2c protocol to send nine dummy clock to recover i2c
device. After recovery, set i2c pinctrl to default group setting.
Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
---
depends on runtime pm patches
http://lists.infradead.org/pipermail/linux-arm-kernel/2016-April/422202.html
.../devicetree/bindings/i2c/i2c-designware.txt | 12 ++++++
drivers/i2c/busses/i2c-designware-core.c | 6 ++-
drivers/i2c/busses/i2c-designware-core.h | 4 ++
drivers/i2c/busses/i2c-designware-platdrv.c | 50 ++++++++++++++++++++++
4 files changed, 71 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index fee26dc..51a55c6 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -20,6 +20,13 @@ Optional properties :
- i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
This value which is by default 300ns is used to compute the tHIGH period.
+ - scl-gpios: specify the gpio related to SCL pin
+
+ - sda-gpios: specify the gpio related to SDA pin
+
+ - pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+ bus recovery, call it "gpio" state
+
Example :
i2c at f0000 {
@@ -42,4 +49,9 @@ Example :
i2c-sda-hold-time-ns = <300>;
i2c-sda-falling-time-ns = <300>;
i2c-scl-falling-time-ns = <300>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&porta 26 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&porta 27 GPIO_ACTIVE_HIGH>;
};
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 4255eaa..be40de1 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -399,7 +399,10 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
if (timeout <= 0) {
dev_warn(dev->dev, "timeout waiting for bus ready\n");
- return -ETIMEDOUT;
+ i2c_recover_bus(&dev->adapter);
+ if (dw_readl(dev, DW_IC_STATUS)
+ & DW_IC_STATUS_ACTIVITY)
+ return -ETIMEDOUT;
}
timeout--;
usleep_range(1000, 1100);
@@ -665,6 +668,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
/* wait for tx to complete */
if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) {
dev_err(dev->dev, "controller timed out\n");
+ i2c_recover_bus(&dev->adapter);
/* i2c_dw_init implicitly disables the adapter */
i2c_dw_init(dev);
ret = -ETIMEDOUT;
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index cd409e7..26c84ee 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -104,6 +104,10 @@ struct dw_i2c_dev {
u16 fs_lcnt;
int (*acquire_lock)(struct dw_i2c_dev *dev);
void (*release_lock)(struct dw_i2c_dev *dev);
+ struct i2c_bus_recovery_info rinfo;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pinctrl_pins_default;
+ struct pinctrl_state *pinctrl_pins_gpio;
bool pm_runtime_disabled;
};
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 1488cea..62bded9 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -33,6 +33,7 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
@@ -148,6 +149,49 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
return 0;
}
+static void i2c_dw_plat_prepare_recovery(struct i2c_adapter *adap)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
+}
+
+static void i2c_dw_plat_unprepare_recovery(struct i2c_adapter *adap)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
+}
+
+static void i2c_dw_plat_init_recovery_info(struct dw_i2c_dev *dev,
+ struct platform_device *pdev)
+{
+ struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
+
+ dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
+ "gpio");
+ rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0);
+ rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0);
+
+ if (!gpio_is_valid(rinfo->sda_gpio) ||
+ !gpio_is_valid(rinfo->scl_gpio) ||
+ IS_ERR(dev->pinctrl_pins_default) ||
+ IS_ERR(dev->pinctrl_pins_gpio)) {
+ dev_dbg(&pdev->dev, "recovery information incomplete\n");
+ return;
+ }
+
+ dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
+ rinfo->sda_gpio, rinfo->scl_gpio);
+
+ rinfo->prepare_recovery = i2c_dw_plat_prepare_recovery;
+ rinfo->unprepare_recovery = i2c_dw_plat_unprepare_recovery;
+ rinfo->recover_bus = i2c_generic_gpio_recovery;
+ dev->adapter.bus_recovery_info = rinfo;
+}
+
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -165,6 +209,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
if (!dev)
return -ENOMEM;
+ dev->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (IS_ERR(dev->pinctrl))
+ return PTR_ERR(dev->pinctrl);
+
+ i2c_dw_plat_init_recovery_info(dev, pdev);
+
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(dev->base))
--
2.8.0.rc3
More information about the linux-arm-kernel
mailing list