[PATCH 6/7] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC
Chanwoo Choi
cw00.choi at samsung.com
Wed Apr 13 16:16:47 PDT 2016
On 2016년 04월 12일 19:53, Krzysztof Kozlowski wrote:
> On 04/08/2016 07:00 AM, Chanwoo Choi wrote:
>> This patch adds the AMBA bus nodes using VDD_INT for Exynos542x SoC.
>> Exynos542x has the following AMBA buses to translate data between
>> DRAM and sub-blocks.
>>
>> Following list specifies the detailed correlation between sub-block and clock:
>> - CLK_DOUT_ACLK400_WCORE clock for WCORE's AXI
>> - CLK_DOUT_ACLK100_NOC for NoC (Network on Chip)'s AXI
>> - CLK_DOUT_PCLK200_FSYS for FSYS's APB
>> - CLK_DOUT_ACLK200_FSYS for FSYS's AXI
>> - CLK_DOUT_ACLK200_FSYS2 for FSYS2's AXI
>> - CLK_DOUT_ACLK333 for MFC's AXI
>> - CLK_DOUT_ACLK266 for GEN's AXI
>> - CLK_DOUT_ACLK66 for PERIC/PERIR's AXI
>> - CLK_DOUT_ACLK333_G2D for G2D's AXI
>> - CLK_DOUT_ACLK266_G2D for ACP's AXI
>> - CLK_DOUT_ACLK300_JPEG for JPEG's AXI
>> - CLK_DOUT_ACLK166 for JPEG's APB
>> - CLK_DOUT_ACLK300_DISP1 for FIMD's AXI
>> - CLK_DOUT_ACLK400_DISP1 for DISP1's AXI
>> - CLK_DOUT_ACLK300_GSCL for GSCL Scaler's AXI
>> - CLK_DOUT_ACLK400_MSCL for MSCL's AXI
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
>> ---
>> arch/arm/boot/dts/exynos5420.dtsi | 371 ++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 371 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
>> index d80f3b66f017..1340024fa882 100644
>> --- a/arch/arm/boot/dts/exynos5420.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420.dtsi
>> @@ -1224,6 +1224,377 @@
>> power-domains = <&disp_pd>;
>> #iommu-cells = <0>;
>> };
>> +
>> + bus_wcore: bus_wcore {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_wcore_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_noc: bus_noc {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK100_NOC>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_noc_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_fsys_apb: bus_fsys_apb {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_fsys_apb_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_fsys: bus_fsys {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_fsys_apb_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_fsys2: bus_fsys2 {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_fsys2_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_mfc: bus_mfc {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK333>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_mfc_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_gen: bus_gen {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK266>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_gen_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_peri: bus_peri {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK66>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_peri_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_g2d: bus_g2d {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK333_G2D>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_g2d_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_g2d_acp: bus_g2d_acp {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK266_G2D>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_g2d_acp_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_jpeg: bus_jpeg {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_jpeg_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_jpeg_apb: bus_jpeg_apb {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK166>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_jpeg_apb_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_disp1_fimd: bus_disp1_fimd {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_disp1_fimd_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_disp1: bus_disp1 {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_disp1_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_gscl_scaler: bus_gscl_scaler {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_gscl_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_mscl: bus_mscl {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_mscl_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_wcore_opp_table: opp_table2 {
>> + compatible = "operating-points-v2";
>> +
>> + opp00 {
>> + opp-hz = /bits/ 64 <84000000>;
>> + opp-microvolt = <925000>;
>> + };
>> + opp01 {
>> + opp-hz = /bits/ 64 <111000000>;
>> + opp-microvolt = <950000>;
>> + };
>> + opp02 {
>> + opp-hz = /bits/ 64 <222000000>;
>> + opp-microvolt = <950000>;
>> + };
>> + opp03 {
>> + opp-hz = /bits/ 64 <333000000>;
>> + opp-microvolt = <950000>;
>> + };
>> + opp04 {
>> + opp-hz = /bits/ 64 <400000000>;
>> + opp-microvolt = <987500>;
>> + };
>> + };
>> +
>> + bus_noc_opp_table: opp_table3 {
>> + compatible = "operating-points-v2";
>> +
>> + opp00 {
>> + opp-hz = /bits/ 64 <66000000>;
>
> 67000000 so it won't be round down?
I'll change it. 66000000 -> 67000000.
>
> Beside that looks good. I am assuming the same apply strategy - I can
> take the DTS changes the bindings got accepted.
>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Thanks for the review.
Best Regards,
Chanwoo Choi
More information about the linux-arm-kernel
mailing list