[PATCH V4 3/7] irqchip, GICv3, ITS: Refator ITS DT init code to prepare for ACPI.
Marc Zyngier
marc.zyngier at arm.com
Wed Apr 13 08:09:06 PDT 2016
On 04/04/16 09:52, Tomasz Nowicki wrote:
> No functional changes.
>
> In order to add ACPI support we need to isolate ACPI&DT common code and
> move DT logic to corresponding functions. To achieve this we are using
> firmware agnostic handle which can be unpacked to either DT or ACPI node.
>
> Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
> Signed-off-by: Tomasz Nowicki <tn at semihalf.com>
> ---
> drivers/irqchip/irq-gic-v3-its.c | 76 ++++++++++++++++++++++----------------
> drivers/irqchip/irq-gic-v3.c | 6 +--
> include/linux/irqchip/arm-gic-v3.h | 2 +-
> 3 files changed, 48 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
> index 065eac5..2dcc7b4 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -815,7 +815,7 @@ static void its_free_tables(struct its_node *its)
> }
> }
>
> -static int its_alloc_tables(const char *node_name, struct its_node *its)
> +static int its_alloc_tables(struct its_node *its)
> {
> int err;
> int i;
> @@ -869,8 +869,8 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
> order);
> if (order >= MAX_ORDER) {
> order = MAX_ORDER - 1;
> - pr_warn("%s: Device Table too large, reduce its page order to %u\n",
> - node_name, order);
> + pr_warn("ITS at 0x%lx: Device Table too large, reduce its page order to %u\n",
> + its->phys_base, order);
Start by making the phys_base field in struct its_node a phys_addr_t (as
it should have been from day-1), and use %pa in the format strings.
> }
> }
>
> @@ -879,8 +879,8 @@ retry_alloc_baser:
> if (alloc_pages > GITS_BASER_PAGES_MAX) {
> alloc_pages = GITS_BASER_PAGES_MAX;
> order = get_order(GITS_BASER_PAGES_MAX * psz);
> - pr_warn("%s: Device Table too large, reduce its page order to %u (%u pages)\n",
> - node_name, order, alloc_pages);
> + pr_warn("ITS at 0x%lx: Device Table too large, reduce its page order to %u (%u pages)\n",
> + its->phys_base, order, alloc_pages);
> }
>
> base = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
> @@ -953,8 +953,8 @@ retry_baser:
> }
>
> if (val != tmp) {
> - pr_err("ITS: %s: GITS_BASER%d doesn't stick: %lx %lx\n",
> - node_name, i,
> + pr_err("ITS at 0x%lx: GITS_BASER%d doesn't stick: %lx %lx\n",
> + its->phys_base, i,
> (unsigned long) val, (unsigned long) tmp);
> err = -ENXIO;
> goto out_free;
> @@ -1429,7 +1429,7 @@ static void its_enable_quirks(struct its_node *its)
> gic_enable_quirks(iidr, its_quirks, its);
> }
>
> -static int its_init_domain(struct device_node *node, struct its_node *its,
> +static int its_init_domain(struct fwnode_handle *handler, struct its_node *its,
> struct irq_domain *parent)
nit: s/handler/handle/g
> {
> struct irq_domain *inner_domain;
> @@ -1439,7 +1439,7 @@ static int its_init_domain(struct device_node *node, struct its_node *its,
> if (!info)
> return -ENOMEM;
>
> - inner_domain = irq_domain_add_tree(node, &its_domain_ops, its);
> + inner_domain = irq_domain_create_tree(handler, &its_domain_ops, its);
> if (!inner_domain) {
> kfree(info);
> return -ENOMEM;
> @@ -1454,43 +1454,39 @@ static int its_init_domain(struct device_node *node, struct its_node *its,
> return 0;
> }
>
> -static int __init its_probe(struct device_node *node,
> - struct irq_domain *parent)
> +static int __init its_probe_one(phys_addr_t phys_base, unsigned long size,
Why don't you pass a resource here? That's the right abstraction to
describe an IO range. Surely you can allocate a resource on the stack in
your ACPI code and pass that around, just like we do here.
> + struct irq_domain *parent,
> + struct fwnode_handle *handler)
> {
> - struct resource res;
> struct its_node *its;
> void __iomem *its_base;
> u32 val;
> u64 baser, tmp;
> int err;
>
> - err = of_address_to_resource(node, 0, &res);
> - if (err) {
> - pr_warn("%s: no regs?\n", node->full_name);
> - return -ENXIO;
> - }
> -
> - its_base = ioremap(res.start, resource_size(&res));
> + its_base = ioremap(phys_base, size);
> if (!its_base) {
> - pr_warn("%s: unable to map registers\n", node->full_name);
> + pr_warn("ITS at 0x%lx: Unable to map ITS registers\n",
> + (long)phys_base);
Same here. Use the right format, and lose the case everywhere.
> return -ENOMEM;
> }
>
> val = readl_relaxed(its_base + GITS_PIDR2) & GIC_PIDR2_ARCH_MASK;
> if (val != 0x30 && val != 0x40) {
> - pr_warn("%s: no ITS detected, giving up\n", node->full_name);
> + pr_warn("ITS at 0x%lx: No ITS detected, giving up\n",
> + (long)phys_base);
> err = -ENODEV;
> goto out_unmap;
> }
>
> err = its_force_quiescent(its_base);
> if (err) {
> - pr_warn("%s: failed to quiesce, giving up\n",
> - node->full_name);
> + pr_warn("ITS at 0x%lx: Failed to quiesce, giving up\n",
> + (long)phys_base);
> goto out_unmap;
> }
>
> - pr_info("ITS: %s\n", node->full_name);
> + pr_info("ITS at 0x%lx\n", (long)phys_base);
>
> its = kzalloc(sizeof(*its), GFP_KERNEL);
> if (!its) {
> @@ -1502,7 +1498,7 @@ static int __init its_probe(struct device_node *node,
> INIT_LIST_HEAD(&its->entry);
> INIT_LIST_HEAD(&its->its_device_list);
> its->base = its_base;
> - its->phys_base = res.start;
> + its->phys_base = phys_base;
> its->ite_size = ((readl_relaxed(its_base + GITS_TYPER) >> 4) & 0xf) + 1;
>
> its->cmd_base = kzalloc(ITS_CMD_QUEUE_SZ, GFP_KERNEL);
> @@ -1514,7 +1510,7 @@ static int __init its_probe(struct device_node *node,
>
> its_enable_quirks(its);
>
> - err = its_alloc_tables(node->full_name, its);
> + err = its_alloc_tables(its);
> if (err)
> goto out_free_cmd;
>
> @@ -1550,7 +1546,7 @@ static int __init its_probe(struct device_node *node,
> writeq_relaxed(0, its->base + GITS_CWRITER);
> writel_relaxed(GITS_CTLR_ENABLE, its->base + GITS_CTLR);
>
> - err = its_init_domain(node, its, parent);
> + err = its_init_domain(handler, its, parent);
> if (err)
> goto out_free_tables;
>
> @@ -1568,7 +1564,7 @@ out_free_its:
> kfree(its);
> out_unmap:
> iounmap(its_base);
> - pr_err("ITS: failed probing %s (%d)\n", node->full_name, err);
> + pr_err("ITS at 0x%lx: failed probing (%d)\n", (long)phys_base, err);
> return err;
> }
>
> @@ -1596,10 +1592,11 @@ static struct of_device_id its_device_id[] = {
> {},
> };
>
> -int __init its_init(struct device_node *node, struct rdists *rdists,
> - struct irq_domain *parent_domain)
> +static int __init
> +its_of_probe(struct device_node *node, struct irq_domain *parent)
> {
> struct device_node *np;
> + struct resource res;
>
> for (np = of_find_matching_node(node, its_device_id); np;
> np = of_find_matching_node(np, its_device_id)) {
> @@ -1609,8 +1606,25 @@ int __init its_init(struct device_node *node, struct rdists *rdists,
> continue;
> }
>
> - its_probe(np, parent_domain);
> + if (of_address_to_resource(np, 0, &res)) {
> + pr_warn("%s: no regs?\n", np->full_name);
> + continue;
> + }
> +
> + its_probe_one(res.start, resource_size(&res), parent,
> + &np->fwnode);
> }
> + return 0;
> +}
> +
> +int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
> + struct irq_domain *parent_domain)
> +{
> + struct device_node *of_node;
> +
> + of_node = to_of_node(handle);
> + if (of_node)
> + its_of_probe(of_node, parent_domain);
>
> if (list_empty(&its_nodes)) {
> pr_warn("ITS: No ITS available, not enabling LPIs\n");
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index dd16a60..995b7251 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -832,7 +832,6 @@ static int __init gic_init_bases(void __iomem *dist_base,
> u64 redist_stride,
> struct fwnode_handle *handle)
> {
> - struct device_node *node;
> u32 typer;
> int gic_irqs;
> int err;
> @@ -872,10 +871,9 @@ static int __init gic_init_bases(void __iomem *dist_base,
>
> set_handle_irq(gic_handle_irq);
>
> - node = to_of_node(handle);
> if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis() &&
> - node) /* Temp hack to prevent ITS init for ACPI */
> - its_init(node, &gic_data.rdists, gic_data.domain);
> + to_of_node(handle)) /* Temp hack to prevent ITS init for ACPI */
> + its_init(handle, &gic_data.rdists, gic_data.domain);
>
> gic_smp_init();
> gic_dist_init();
> diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
> index d5d798b..a40ed7d 100644
> --- a/include/linux/irqchip/arm-gic-v3.h
> +++ b/include/linux/irqchip/arm-gic-v3.h
> @@ -332,7 +332,7 @@ struct rdists {
> struct irq_domain;
> struct device_node;
> int its_cpu_init(void);
> -int its_init(struct device_node *node, struct rdists *rdists,
> +int its_init(struct fwnode_handle *handle, struct rdists *rdists,
> struct irq_domain *domain);
>
> static inline bool gic_enable_sre(void)
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
More information about the linux-arm-kernel
mailing list