[PATCH v4 14/16] arm64: dts: hikey: Add hi655x pmic dts node

Guodong Xu guodong.xu at linaro.org
Tue Apr 12 17:14:43 PDT 2016


On 13 April 2016 at 08:11, Rob Herring <robh+dt at kernel.org> wrote:
> On Tue, Apr 12, 2016 at 6:55 PM, Guodong Xu <guodong.xu at linaro.org> wrote:
>> From: Chen Feng <puck.chen at hisilicon.com>
>>
>> Add the mfd hi655x dts node and regulator support on hi6220 platform.
>>
>> Signed-off-by: Chen Feng <puck.chen at hisilicon.com>
>> Signed-off-by: Fei Wang <w.f at huawei.com>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei at hisilicon.com>
>> Signed-off-by: Guodong Xu <guodong.xu at linaro.org>
>> Reviewed-by: Haojian Zhuang <haojian.zhuang at linaro.org>
>> Reviewed-by: Rob Herring <robh at kernel.org>
>
> I did not provide a Reviewed-by. You cannot add people's Reviewed-by
> just because they provided a review. It is only when the review is
> finished that the reviewer will give it.

Got it.
:)

>
> That being said, it looks fine now and you can add it.

Thank you.

-Guodong

>
>> Acked-by: Lee Jones <lee.jones at linaro.org>
>> ---
>>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 +++++++++++++++++++++++++-
>>  1 file changed, 86 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> index b7c41f8..cc1148d 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> @@ -6,9 +6,9 @@
>>   */
>>
>>  /dts-v1/;
>> -
>>  #include "hi6220.dtsi"
>>  #include "hikey-pinctrl.dtsi"
>> +#include <dt-bindings/gpio/gpio.h>
>>
>>  / {
>>         model = "HiKey Development Board";
>> @@ -107,6 +107,91 @@
>>                         default-state = "off";
>>                 };
>>         };
>> +
>> +       pmic: pmic at f8000000 {
>> +               compatible = "hisilicon,hi655x-pmic";
>> +               reg = <0x0 0xf8000000 0x0 0x1000>;
>> +               interrupt-controller;
>> +               #interrupt-cells = <2>;
>> +               pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>> +
>> +               regulators {
>> +                       ldo2: LDO2 {
>> +                               regulator-name = "LDO2_2V8";
>> +                               regulator-min-microvolt = <2500000>;
>> +                               regulator-max-microvolt = <3200000>;
>> +                               regulator-enable-ramp-delay = <120>;
>> +                       };
>> +
>> +                       ldo7: LDO7 {
>> +                               regulator-name = "LDO7_SDIO";
>> +                               regulator-min-microvolt = <1800000>;
>> +                               regulator-max-microvolt = <3300000>;
>> +                               regulator-enable-ramp-delay = <120>;
>> +                       };
>> +
>> +                       ldo10: LDO10 {
>> +                               regulator-name = "LDO10_2V85";
>> +                               regulator-min-microvolt = <1800000>;
>> +                               regulator-max-microvolt = <3000000>;
>> +                               regulator-enable-ramp-delay = <360>;
>> +                       };
>> +
>> +                       ldo13: LDO13 {
>> +                               regulator-name = "LDO13_1V8";
>> +                               regulator-min-microvolt = <1600000>;
>> +                               regulator-max-microvolt = <1950000>;
>> +                               regulator-enable-ramp-delay = <120>;
>> +                       };
>> +
>> +                       ldo14: LDO14 {
>> +                               regulator-name = "LDO14_2V8";
>> +                               regulator-min-microvolt = <2500000>;
>> +                               regulator-max-microvolt = <3200000>;
>> +                               regulator-enable-ramp-delay = <120>;
>> +                       };
>> +
>> +                       ldo15: LDO15 {
>> +                               regulator-name = "LDO15_1V8";
>> +                               regulator-min-microvolt = <1600000>;
>> +                               regulator-max-microvolt = <1950000>;
>> +                               regulator-boot-on;
>> +                               regulator-always-on;
>> +                               regulator-enable-ramp-delay = <120>;
>> +                       };
>> +
>> +                       ldo17: LDO17 {
>> +                               regulator-name = "LDO17_2V5";
>> +                               regulator-min-microvolt = <2500000>;
>> +                               regulator-max-microvolt = <3200000>;
>> +                               regulator-enable-ramp-delay = <120>;
>> +                       };
>> +
>> +                       ldo19: LDO19 {
>> +                               regulator-name = "LDO19_3V0";
>> +                               regulator-min-microvolt = <1800000>;
>> +                               regulator-max-microvolt = <3000000>;
>> +                               regulator-enable-ramp-delay = <360>;
>> +                       };
>> +
>> +                       ldo21: LDO21 {
>> +                               regulator-name = "LDO21_1V8";
>> +                               regulator-min-microvolt = <1650000>;
>> +                               regulator-max-microvolt = <2000000>;
>> +                               regulator-always-on;
>> +                               regulator-enable-ramp-delay = <120>;
>> +                       };
>> +
>> +                       ldo22: LDO22 {
>> +                               regulator-name = "LDO22_1V2";
>> +                               regulator-min-microvolt = <900000>;
>> +                               regulator-max-microvolt = <1200000>;
>> +                               regulator-boot-on;
>> +                               regulator-always-on;
>> +                               regulator-enable-ramp-delay = <120>;
>> +                       };
>> +               };
>> +       };
>>  };
>>
>>  &uart2 {
>> --
>> 1.9.1
>>



More information about the linux-arm-kernel mailing list