[PATCH v2 14/16] arm64: dts: hikey: Add hi655x pmic dts node

[Guodong Xu]

On 4 April 2016 at 13:16, Rob Herring <robh at kernel.org> wrote:
> On Sat, Apr 02, 2016 at 05:29:41PM +0800, Guodong Xu wrote:
>> From: Chen Feng <puck.chen at hisilicon.com>
>>
>> Add the mfd hi655x dts node and regulator support on
>> hi6220 platform.
>>
>> Signed-off-by: Chen Feng <puck.chen at hisilicon.com>
>> Signed-off-by: Fei Wang <w.f at huawei.com>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei at hisilicon.com>
>> Reviewed-by: Haojian Zhuang <haojian.zhuang at linaro.org>
>> Reviewed-by: Guodong Xu <guodong.xu at linaro.org>
>> ---
>>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 ++++++++++++++++++++++++++
>>  1 file changed, 87 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> index 28bc646..a6dffa8 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> @@ -6,6 +6,7 @@
>>   */
>>
>>  /dts-v1/;
>> +#include <dt-bindings/gpio/gpio.h>
>>
>>  #include "hi6220.dtsi"
>>  #include "hikey-gpio.dtsi"
>> @@ -104,6 +105,92 @@
>>                       default-state = "off";
>>               };
>>       };
>> +
>> +     pmic: pmic at f8000000 {
>> +             compatible = "hisilicon,hi655x-pmic";
>> +             reg = <0x0 0xf8000000 0x0 0x1000>;
>> +             interrupt-controller;
>> +             #interrupt-cells = <2>;
>> +             pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>> +             status = "okay";
>> +
>> +             regulators {
>> +                     ldo2: LDO2 at a21 {
>
> @a21 is not a unit address. Please drop these.

Will change these to
 +                     ldo2: LDO2 {
...
 +                     ldo7: LDO7 {
...

Thanks for review, Rob.

-Guodong

>
>> +                             regulator-name = "LDO2_2V8";
>> +                             regulator-min-microvolt = <2500000>;
>> +                             regulator-max-microvolt = <3200000>;
>> +                             regulator-enable-ramp-delay = <120>;
>> +                     };
>> +
>> +                     ldo7: LDO7 at a26 {