[PATCH v5 2/2] ohci-platform: Add support for controllers with multiple reset lines
Hans de Goede
hdegoede at redhat.com
Sat Apr 9 07:15:15 PDT 2016
At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
reset lines, the controller will not initialize while the reset for
its companion is still asserted, which means we need to de-assert
2 resets for the controller to work.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
Changes in v2:
-New patch in v2 of this patch-set, to complement the identical patch for
the ehci-platform code
---
Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 +-
drivers/usb/host/ohci-platform.c | 43 ++++++++++++----------
2 files changed, 24 insertions(+), 21 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index 19233b7..9df4569 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -14,7 +14,7 @@ Optional properties:
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
-- resets : phandle + reset specifier pair
+- resets : a list of phandle + reset specifier pairs
Example:
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index ae1c988..898b740 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -33,11 +33,12 @@
#define DRIVER_DESC "OHCI generic platform driver"
#define OHCI_MAX_CLKS 3
+#define OHCI_MAX_RESETS 2
#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
struct ohci_platform_priv {
struct clk *clks[OHCI_MAX_CLKS];
- struct reset_control *rst;
+ struct reset_control *resets[OHCI_MAX_RESETS];
struct phy **phys;
int num_phys;
};
@@ -117,7 +118,7 @@ static int ohci_platform_probe(struct platform_device *dev)
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ohci_platform_priv *priv;
struct ohci_hcd *ohci;
- int err, irq, phy_num, clk = 0;
+ int err, irq, phy_num, clk = 0, rst = 0;
if (usb_disabled())
return -ENODEV;
@@ -195,19 +196,21 @@ static int ohci_platform_probe(struct platform_device *dev)
break;
}
}
-
- }
-
- priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
- if (IS_ERR(priv->rst)) {
- err = PTR_ERR(priv->rst);
- if (err == -EPROBE_DEFER)
- goto err_put_clks;
- priv->rst = NULL;
- } else {
- err = reset_control_deassert(priv->rst);
- if (err)
- goto err_put_clks;
+ for (rst = 0; rst < OHCI_MAX_RESETS; rst++) {
+ priv->resets[rst] =
+ devm_reset_control_get_shared_by_index(
+ &dev->dev, rst);
+ if (IS_ERR(priv->resets[rst])) {
+ err = PTR_ERR(priv->resets[rst]);
+ if (err == -EPROBE_DEFER)
+ goto err_reset;
+ priv->resets[rst] = NULL;
+ break;
+ }
+ err = reset_control_deassert(priv->resets[rst]);
+ if (err)
+ goto err_reset;
+ }
}
if (pdata->big_endian_desc)
@@ -265,8 +268,8 @@ err_power:
if (pdata->power_off)
pdata->power_off(dev);
err_reset:
- if (priv->rst)
- reset_control_assert(priv->rst);
+ while (--rst >= 0)
+ reset_control_assert(priv->resets[rst]);
err_put_clks:
while (--clk >= 0)
clk_put(priv->clks[clk]);
@@ -284,15 +287,15 @@ static int ohci_platform_remove(struct platform_device *dev)
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
- int clk;
+ int clk, rst;
usb_remove_hcd(hcd);
if (pdata->power_off)
pdata->power_off(dev);
- if (priv->rst)
- reset_control_assert(priv->rst);
+ for (rst = 0; rst < OHCI_MAX_RESETS && priv->resets[rst]; rst++)
+ reset_control_assert(priv->resets[rst]);
for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
clk_put(priv->clks[clk]);
--
2.7.3
More information about the linux-arm-kernel
mailing list