[PATCH net-next V3 00/16] net: fec: cleanup and fixes

[Troy Kisky]

On 4/6/2016 9:43 AM, Troy Kisky wrote:
> On 4/6/2016 1:51 AM, Fugang Duan wrote:
>> From: Troy Kisky <troy.kisky at boundarydevices.com> Sent: Wednesday, April 06, 2016 10:26 AM
>>> To: netdev at vger.kernel.org; davem at davemloft.net; Fugang Duan
>>> <fugang.duan at nxp.com>; lznuaa at gmail.com
>>> Cc: Fabio Estevam <fabio.estevam at nxp.com>; l.stach at pengutronix.de;
>>> andrew at lunn.ch; tremyfr at gmail.com; gerg at uclinux.org; linux-arm-
>>> kernel at lists.infradead.org; johannes at sipsolutions.net;
>>> stillcompiling at gmail.com; sergei.shtylyov at cogentembedded.com;
>>> arnd at arndb.de; Troy Kisky <troy.kisky at boundarydevices.com>
>>> Subject: [PATCH net-next V3 00/16] net: fec: cleanup and fixes
>>>
>>> V3 has
>>>
>>> 1 dropped patch "net: fec: print more debug info in fec_timeout"
>>> 2 new patches
>>> 0002-net-fec-remove-unused-interrupt-FEC_ENET_TS_TIMER.patch
>>> 0003-net-fec-return-IRQ_HANDLED-if-fec_ptp_check_pps_even.patch
>>>
>>> 1 combined patch
>>> 0004-net-fec-pass-rxq-txq-to-fec_enet_rx-tx_queue-instead.patch
>>>
>>> The changes are noted on individual patches
>>>
>>> My measured performance of this series is
>>>
>>> before patch set
>>> 365 Mbits/sec Tx/407 RX
>>>
>>> after patch set
>>> 374 Tx/427 Rx
>>>
>>
>> I doubt the performance data,  I validate it on i.MX6q sabresd board on the latest commit(4da46cebbd3b) in net tree.
> 
> 
> 
> I was doing UDP tests, as outlined in my V2 cover letter. Also, my cpu is 1G. Is yours 1.2G?
> 
> 
> 
> 
>> root at imx6qdlsolo:~# uname -a
>> Linux imx6qdlsolo 4.6.0-rc1-00318-g4da46ce #180 SMP Wed Apr 6 16:24:09 CST 2016 armv7l GNU/Linux
> 
> 
> This is the V2 patch that I dropped.


Sorry, your right. It is the current head, without this series.


> 
> I will force update my local net-next_master branch, to make testing this series easier.
> Note that my local net-next_master branch has about 19 patches on top of this series.
> so,
> 
> tkisky at office-server2:~/linux-imx6$ git reset --hard HEAD~19
> HEAD is now at a125da7 net: fec: don't set cbd_bufaddr unless no mapping error
> 
> 
>>
>> TCP RX performance is 602Mbps, TX is only 325Mbps,   TX path has some performance issue in net tree.
>> I will dig out it.
>>
>>
> 
> 
> More testing is always better. Thanks
> 
> 
>>>
>>> Troy Kisky (16):
>>>   net: fec: only check queue 0 if RXF_0/TXF_0 interrupt is set
>>>   net: fec: remove unused interrupt FEC_ENET_TS_TIMER
>>>   net: fec: return IRQ_HANDLED if fec_ptp_check_pps_event handled it
>>>   net: fec: pass rxq/txq to fec_enet_rx/tx_queue instead of queue_id
>>>   net: fec: reduce interrupts
>>>   net: fec: split off napi routine with 3 queues
>>>   net: fec: don't clear all rx queue bits when just one is being checked
>>>   net: fec: set cbd_sc without relying on previous value
>>>   net: fec: eliminate calls to fec_enet_get_prevdesc
>>>   net: fec: move restart test for efficiency
>>>   net: fec: clear cbd_sc after transmission to help with debugging
>>>   net: fec: dump all tx queues in fec_dump
>>>   net: fec: detect tx int lost
>>>   net: fec: create subroutine reset_tx_queue
>>>   net: fec: call dma_unmap_single on mapped tx buffers at restart
>>>   net: fec: don't set cbd_bufaddr unless no mapping error
>>>
>>>  drivers/net/ethernet/freescale/fec.h      |  10 +-
>>>  drivers/net/ethernet/freescale/fec_main.c | 410 ++++++++++++++++------------
>>> --
>>>  2 files changed, 218 insertions(+), 202 deletions(-)
>>>
>>> --
>>> 2.5.0
>>