[PATCH v2 06/11] ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250
Krzysztof Kozlowski
k.kozlowski at samsung.com
Tue Apr 5 19:00:45 PDT 2016
Fix following DTC warnings in all Exynos5250 boards:
Warning (unit_address_vs_reg): Node /dp-controller at 145B0000/display-timings/timing at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb at 12000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb at 12000000/dwc3 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /hdmi has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /mixer has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /video-phy at 10040720 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c at 12C70000/trackpad has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c at 12CD0000/lvds-bridge at 20/ports/port at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c at 12CD0000/lvds-bridge at 20/ports/port at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c at 0/embedded-controller has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c at 0/power-regulator has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c at 12CA0000/embedded-controller has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Reviewed-by: Javier Martinez Canillas <javier at osg.samsung.com>
---
Changes since v1:
1. Add Javier's tag.
---
arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 8 ++++----
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 12 ++++++------
arch/arm/boot/dts/exynos5250-spring.dts | 2 +-
arch/arm/boot/dts/exynos5250.dtsi | 10 +++++-----
5 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 8b2acc74aa76..1e25152dc0f6 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -133,7 +133,7 @@
display-timings {
native-mode = <&timing0>;
- timing0: timing at 0 {
+ timing0: timing {
/* 2560x1600 DP panel */
clock-frequency = <50000>;
hactive = <2560>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0f5dcd418af8..0e2eb3f6b590 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -29,7 +29,7 @@
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
- vdd: fixed-regulator at 0 {
+ vdd: fixed-regulator-vdd {
compatible = "regulator-fixed";
regulator-name = "vdd-supply";
regulator-min-microvolt = <1800000>;
@@ -37,7 +37,7 @@
regulator-always-on;
};
- dbvdd: fixed-regulator at 1 {
+ dbvdd: fixed-regulator-dbvdd {
compatible = "regulator-fixed";
regulator-name = "dbvdd-supply";
regulator-min-microvolt = <3300000>;
@@ -45,7 +45,7 @@
regulator-always-on;
};
- spkvdd: fixed-regulator at 2 {
+ spkvdd: fixed-regulator-spkvdd {
compatible = "regulator-fixed";
regulator-name = "spkvdd-supply";
regulator-min-microvolt = <5000000>;
@@ -93,7 +93,7 @@
display-timings {
native-mode = <&timing0>;
- timing0: timing at 0 {
+ timing0: timing {
/* 1280x800 */
clock-frequency = <50000>;
hactive = <1280>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 95210ef6a6b5..c9889b1f530a 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -84,7 +84,7 @@
sbs,poll-retry-count = <1>;
};
- cros_ec: embedded-controller {
+ cros_ec: embedded-controller at 1e {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
interrupts = <6 IRQ_TYPE_NONE>;
@@ -94,7 +94,7 @@
wakeup-source;
};
- power-regulator {
+ power-regulator at 48 {
compatible = "ti,tps65090";
reg = <0x48>;
@@ -244,7 +244,7 @@
samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
ports {
- port at 0 {
+ port0 {
dp_out: endpoint {
remote-endpoint = <&bridge_in>;
};
@@ -428,7 +428,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- trackpad {
+ trackpad at 67 {
reg = <0x67>;
compatible = "cypress,cyapa";
interrupts = <2 IRQ_TYPE_NONE>;
@@ -487,13 +487,13 @@
edid-emulation = <5>;
ports {
- port at 0 {
+ port0 {
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
- port at 1 {
+ port1 {
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 0f500cb1eb2d..273d66282ebc 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -383,7 +383,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- cros_ec: embedded-controller {
+ cros_ec: embedded-controller at 1e {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
interrupts = <6 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index e653ae04015a..c7158b2fb213 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -596,7 +596,7 @@
pinctrl-0 = <&i2s2_bus>;
};
- usb at 12000000 {
+ usb_dwc3 {
compatible = "samsung,exynos5250-dwusb3";
clocks = <&clock CLK_USB3>;
clock-names = "usbdrd30";
@@ -604,7 +604,7 @@
#size-cells = <1>;
ranges;
- usbdrd_dwc3: dwc3 {
+ usbdrd_dwc3: dwc3 at 12000000 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <0 72 0>;
@@ -763,7 +763,7 @@
iommu = <&sysmmu_gsc3>;
};
- hdmi: hdmi {
+ hdmi: hdmi at 14530000 {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
@@ -776,7 +776,7 @@
samsung,syscon-phandle = <&pmu_system_controller>;
};
- mixer {
+ mixer at 14450000 {
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
@@ -787,7 +787,7 @@
iommus = <&sysmmu_tv>;
};
- dp_phy: video-phy at 10040720 {
+ dp_phy: video-phy {
compatible = "samsung,exynos5250-dp-video-phy";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
--
2.5.0
More information about the linux-arm-kernel
mailing list