[PATCH v2 04/11] ARM: dts: exynos: Fix DTC unit name warnings in Trats2 board

[Krzysztof Kozlowski]

Fix following DTC warnings in Trats2 board:

Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693 at 66/regulators/ESAFEOUT1 at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693 at 66/regulators/ESAFEOUT2 at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693 at 66/regulators/CHARGER at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /thermistor-ap at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /thermistor-battery at 1 has a unit name, but no reg property

Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Reviewed-by: Javier Martinez Canillas <javier at osg.samsung.com>

---

Changes since v1:
1. Don't add unit name to memory.
2. Add Javier's tag.
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 2bf363c3bf62..27dbf1687754 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -146,13 +146,13 @@
 			reg = <0x66>;
 
 			regulators {
-				esafeout1_reg: ESAFEOUT1 at 1 {
+				esafeout1_reg: ESAFEOUT1 {
 					regulator-name = "ESAFEOUT1";
 				};
-				esafeout2_reg: ESAFEOUT2 at 2 {
+				esafeout2_reg: ESAFEOUT2 {
 					regulator-name = "ESAFEOUT2";
 				};
-				charger_reg: CHARGER at 0 {
+				charger_reg: CHARGER {
 					regulator-name = "CHARGER";
 					regulator-min-microamp = <60000>;
 					regulator-max-microamp = <2580000>;
@@ -251,7 +251,7 @@
 			"SPK", "SPKOUTRP";
 	};
 
-	thermistor-ap at 0 {
+	thermistor-ap {
 		compatible = "ntc,ncp15wb473";
 		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
 		pullup-ohm = <100000>;	 /* 100K */
@@ -259,7 +259,7 @@
 		io-channels = <&adc 1>;  /* AP temperature */
 	};
 
-	thermistor-battery at 1 {
+	thermistor-battery {
 		compatible = "ntc,ncp15wb473";
 		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
 		pullup-ohm = <100000>;	 /* 100K */
@@ -1276,7 +1276,7 @@
 	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	s5c73m3_spi: s5c73m3 {
+	s5c73m3_spi: s5c73m3 at 0 {
 		compatible = "samsung,s5c73m3";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
-- 
2.5.0