[PATCH v3 3/9] drm/fsl-dcu: disable clock on initialization failure and remove
Stefan Agner
stefan at agner.ch
Mon Apr 4 22:28:35 PDT 2016
Fix error handling during probe by reordering initialization and
adding a error path which disables clock again. Also disable the
clock on remove.
Signed-off-by: Stefan Agner <stefan at agner.ch>
---
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 44 +++++++++++++++----------------
1 file changed, 21 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index e8d9337..f2a9c1b 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -290,6 +290,11 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
if (!fsl_dev)
return -ENOMEM;
+ id = of_match_node(fsl_dcu_of_match, pdev->dev.of_node);
+ if (!id)
+ return -ENODEV;
+ fsl_dev->soc = id->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "could not get memory IO resource\n");
@@ -308,39 +313,29 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
return -ENXIO;
}
+ fsl_dev->regmap = devm_regmap_init_mmio(dev, base,
+ &fsl_dcu_regmap_config);
+ if (IS_ERR(fsl_dev->regmap)) {
+ dev_err(dev, "regmap init failed\n");
+ return PTR_ERR(fsl_dev->regmap);
+ }
+
fsl_dev->clk = devm_clk_get(dev, "dcu");
if (IS_ERR(fsl_dev->clk)) {
- ret = PTR_ERR(fsl_dev->clk);
dev_err(dev, "failed to get dcu clock\n");
- return ret;
- }
- ret = clk_prepare(fsl_dev->clk);
- if (ret < 0) {
- dev_err(dev, "failed to prepare dcu clk\n");
- return ret;
+ return PTR_ERR(fsl_dev->clk);
}
- ret = clk_enable(fsl_dev->clk);
+ ret = clk_prepare_enable(fsl_dev->clk);
if (ret < 0) {
dev_err(dev, "failed to enable dcu clk\n");
- clk_unprepare(fsl_dev->clk);
return ret;
}
- fsl_dev->regmap = devm_regmap_init_mmio(dev, base,
- &fsl_dcu_regmap_config);
- if (IS_ERR(fsl_dev->regmap)) {
- dev_err(dev, "regmap init failed\n");
- return PTR_ERR(fsl_dev->regmap);
- }
-
- id = of_match_node(fsl_dcu_of_match, pdev->dev.of_node);
- if (!id)
- return -ENODEV;
- fsl_dev->soc = id->data;
-
drm = drm_dev_alloc(driver, dev);
- if (!drm)
- return -ENOMEM;
+ if (!drm) {
+ ret = -ENOMEM;
+ goto disable_clk;
+ }
fsl_dev->dev = dev;
fsl_dev->drm = drm;
@@ -360,6 +355,8 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
unref:
drm_dev_unref(drm);
+disable_clk:
+ clk_disable_unprepare(fsl_dev->clk);
return ret;
}
@@ -367,6 +364,7 @@ static int fsl_dcu_drm_remove(struct platform_device *pdev)
{
struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev);
+ clk_disable_unprepare(fsl_dev->clk);
drm_put_dev(fsl_dev->drm);
return 0;
--
2.7.4
More information about the linux-arm-kernel
mailing list