[PATCH 4/8] ARM: dts: am33xx: fix clock node definitions to avoid build warnings
Tero Kristo
t-kristo at ti.com
Mon Apr 4 08:16:09 PDT 2016
Upcoming change to DT compiler is going to complain about nodes
which have a reg property, but have not defined the address in their
name. This patch fixes following type of warnings for AM33xx clock nodes:
Warning (unit_address_vs_reg): Node /ocp/cm at 48004000/clocks/dpll3_m2_ck
has a reg or ranges property, but no unit name
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
arch/arm/boot/dts/am33xx-clocks.dtsi | 90 +++++++++++++++++-----------------
1 file changed, 45 insertions(+), 45 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index afb4b3a..8d83195 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
&scm_clocks {
- sys_clkin_ck: sys_clkin_ck {
+ sys_clkin_ck: sys_clkin_ck at 40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
@@ -163,7 +163,7 @@
clock-frequency = <12000000>;
};
- dpll_core_ck: dpll_core_ck {
+ dpll_core_ck: dpll_core_ck at 490 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-core-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
@@ -176,7 +176,7 @@
clocks = <&dpll_core_ck>;
};
- dpll_core_m4_ck: dpll_core_m4_ck {
+ dpll_core_m4_ck: dpll_core_m4_ck at 480 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@@ -185,7 +185,7 @@
ti,index-starts-at-one;
};
- dpll_core_m5_ck: dpll_core_m5_ck {
+ dpll_core_m5_ck: dpll_core_m5_ck at 484 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@@ -194,7 +194,7 @@
ti,index-starts-at-one;
};
- dpll_core_m6_ck: dpll_core_m6_ck {
+ dpll_core_m6_ck: dpll_core_m6_ck at 4d8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@@ -203,14 +203,14 @@
ti,index-starts-at-one;
};
- dpll_mpu_ck: dpll_mpu_ck {
+ dpll_mpu_ck: dpll_mpu_ck at 488 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0488>, <0x0420>, <0x042c>;
};
- dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+ dpll_mpu_m2_ck: dpll_mpu_m2_ck at 4a8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_mpu_ck>;
@@ -219,14 +219,14 @@
ti,index-starts-at-one;
};
- dpll_ddr_ck: dpll_ddr_ck {
+ dpll_ddr_ck: dpll_ddr_ck at 494 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0494>, <0x0434>, <0x0440>;
};
- dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+ dpll_ddr_m2_ck: dpll_ddr_m2_ck at 4a0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_ddr_ck>;
@@ -243,14 +243,14 @@
clock-div = <2>;
};
- dpll_disp_ck: dpll_disp_ck {
+ dpll_disp_ck: dpll_disp_ck at 498 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0498>, <0x0448>, <0x0454>;
};
- dpll_disp_m2_ck: dpll_disp_m2_ck {
+ dpll_disp_m2_ck: dpll_disp_m2_ck at 4a4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_disp_ck>;
@@ -260,14 +260,14 @@
ti,set-rate-parent;
};
- dpll_per_ck: dpll_per_ck {
+ dpll_per_ck: dpll_per_ck at 48c {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-j-type-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x048c>, <0x0470>, <0x049c>;
};
- dpll_per_m2_ck: dpll_per_m2_ck {
+ dpll_per_m2_ck: dpll_per_m2_ck at 4ac {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_per_ck>;
@@ -292,7 +292,7 @@
clock-div = <4>;
};
- cefuse_fck: cefuse_fck {
+ cefuse_fck: cefuse_fck at a20 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_clkin_ck>;
@@ -316,7 +316,7 @@
clock-div = <732>;
};
- clkdiv32k_ick: clkdiv32k_ick {
+ clkdiv32k_ick: clkdiv32k_ick at 14c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ck>;
@@ -332,14 +332,14 @@
clock-div = <1>;
};
- pruss_ocp_gclk: pruss_ocp_gclk {
+ pruss_ocp_gclk: pruss_ocp_gclk at 530 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
reg = <0x0530>;
};
- mmu_fck: mmu_fck {
+ mmu_fck: mmu_fck at 914 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_core_m4_ck>;
@@ -347,56 +347,56 @@
reg = <0x0914>;
};
- timer1_fck: timer1_fck {
+ timer1_fck: timer1_fck at 528 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
reg = <0x0528>;
};
- timer2_fck: timer2_fck {
+ timer2_fck: timer2_fck at 508 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0508>;
};
- timer3_fck: timer3_fck {
+ timer3_fck: timer3_fck at 50c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x050c>;
};
- timer4_fck: timer4_fck {
+ timer4_fck: timer4_fck at 510 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0510>;
};
- timer5_fck: timer5_fck {
+ timer5_fck: timer5_fck at 518 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0518>;
};
- timer6_fck: timer6_fck {
+ timer6_fck: timer6_fck at 51c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x051c>;
};
- timer7_fck: timer7_fck {
+ timer7_fck: timer7_fck at 504 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0504>;
};
- usbotg_fck: usbotg_fck {
+ usbotg_fck: usbotg_fck at 47c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_ck>;
@@ -412,7 +412,7 @@
clock-div = <2>;
};
- ieee5000_fck: ieee5000_fck {
+ ieee5000_fck: ieee5000_fck at e4 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_core_m4_div2_ck>;
@@ -420,7 +420,7 @@
reg = <0x00e4>;
};
- wdt1_fck: wdt1_fck {
+ wdt1_fck: wdt1_fck at 538 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
@@ -483,21 +483,21 @@
clock-div = <2>;
};
- cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+ cpsw_cpts_rft_clk: cpsw_cpts_rft_clk at 520 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
reg = <0x0520>;
};
- gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+ gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck at 53c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
reg = <0x053c>;
};
- gpio0_dbclk: gpio0_dbclk {
+ gpio0_dbclk: gpio0_dbclk at 408 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&gpio0_dbclk_mux_ck>;
@@ -505,7 +505,7 @@
reg = <0x0408>;
};
- gpio1_dbclk: gpio1_dbclk {
+ gpio1_dbclk: gpio1_dbclk at ac {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@@ -513,7 +513,7 @@
reg = <0x00ac>;
};
- gpio2_dbclk: gpio2_dbclk {
+ gpio2_dbclk: gpio2_dbclk at b0 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@@ -521,7 +521,7 @@
reg = <0x00b0>;
};
- gpio3_dbclk: gpio3_dbclk {
+ gpio3_dbclk: gpio3_dbclk at b4 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@@ -529,7 +529,7 @@
reg = <0x00b4>;
};
- lcd_gclk: lcd_gclk {
+ lcd_gclk: lcd_gclk at 534 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
@@ -545,7 +545,7 @@
clock-div = <2>;
};
- gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+ gfx_fclk_clksel_ck: gfx_fclk_clksel_ck at 52c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
@@ -553,7 +553,7 @@
reg = <0x052c>;
};
- gfx_fck_div_ck: gfx_fck_div_ck {
+ gfx_fck_div_ck: gfx_fck_div_ck at 52c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&gfx_fclk_clksel_ck>;
@@ -561,14 +561,14 @@
ti,max-div = <2>;
};
- sysclkout_pre_ck: sysclkout_pre_ck {
+ sysclkout_pre_ck: sysclkout_pre_ck at 700 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
reg = <0x0700>;
};
- clkout2_div_ck: clkout2_div_ck {
+ clkout2_div_ck: clkout2_div_ck at 700 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sysclkout_pre_ck>;
@@ -577,7 +577,7 @@
reg = <0x0700>;
};
- dbg_sysclk_ck: dbg_sysclk_ck {
+ dbg_sysclk_ck: dbg_sysclk_ck at 414 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_clkin_ck>;
@@ -585,7 +585,7 @@
reg = <0x0414>;
};
- dbg_clka_ck: dbg_clka_ck {
+ dbg_clka_ck: dbg_clka_ck at 414 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_core_m4_ck>;
@@ -593,7 +593,7 @@
reg = <0x0414>;
};
- stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
+ stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck at 414 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
@@ -601,7 +601,7 @@
reg = <0x0414>;
};
- trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
+ trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck at 414 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
@@ -609,7 +609,7 @@
reg = <0x0414>;
};
- stm_clk_div_ck: stm_clk_div_ck {
+ stm_clk_div_ck: stm_clk_div_ck at 414 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&stm_pmd_clock_mux_ck>;
@@ -619,7 +619,7 @@
ti,index-power-of-two;
};
- trace_clk_div_ck: trace_clk_div_ck {
+ trace_clk_div_ck: trace_clk_div_ck at 414 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&trace_pmd_clk_mux_ck>;
@@ -629,7 +629,7 @@
ti,index-power-of-two;
};
- clkout2_ck: clkout2_ck {
+ clkout2_ck: clkout2_ck at 700 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkout2_div_ck>;
--
1.7.9.5
More information about the linux-arm-kernel
mailing list