[PATCH v5 2/4] Documentation: Bindings: Add STM32 DWMAC glue

[Alexandre Torgue]

Hi Rob,

2016-03-22 17:11 GMT+01:00 Alexandre Torgue <alexandre.torgue at gmail.com>:
> Hi guys,
>
> I will fix typo issues (s/vesrion/version and ethernet @).
>
> Concerning compatible string. For sure "snps,dwmac-3.50a" string is
> not used inside glue driver.
> I perfere to keep it for information but if you really want that I
> remove it I will not block ;)
>
> 2016-03-21 16:36 GMT+01:00 Joachim  Eastwood <manabian at gmail.com>:
>> On 21 March 2016 at 13:40, Rob Herring <robh at kernel.org> wrote:
>>> On Sat, Mar 19, 2016 at 12:00:22AM +0800, Chen-Yu Tsai wrote:
>>>> Hi,
>>>>
>>>> On Fri, Mar 18, 2016 at 11:37 PM, Alexandre TORGUE
>>>> <alexandre.torgue at gmail.com> wrote:
>>>> > +- clocks: Must contain a phandle for each entry in clock-names.
>>>> > +- clock-names: Should be "stmmaceth" for the host clock.
>>>
> We can remove host clock (stmmac eth) entry here and refer to
> stmmac.txt binding for common entry
>
>>> This doesn't sound like the clock input signal name...
>>>
>>>> > +              Should be "tx-clk" for the MAC TX clock.
>>>> > +              Should be "rx-clk" for the MAC RX clock.
>>>
>>> How can other DWMAC blocks not have these clocks? The glue can't really
>>> add these clocks. It could combine them into one or a new version of
>>> DWMAC could have a different number of clock inputs. So if there is
>>> variation here, then some of the bindings are probably wrong. I guess
>>> the only change I'm suggesting is possibly moving these into common
>>> binding doc.
>>
>> The LPC18xx implementation probably have these clocks as well but the
>> LPC1850 user manual only documents the main clock. Someone with access
>> to the IP block doc from Synopsys should be able to check which clocks
>> the MAC really needs.
>>
>> Rockchip bindings have two clocks named "mac_clk_rx" and "mac_clk_tx".
>> These are probably the same as stm32 needs so maybe use these names
>> and move them into the main doc and update the rockchip binding.
>>
> I think we can use same name. But I have a doubt on moving it in a
> common bindings (maybe I don't well understood). When you say "common
> binding file" is it "stmmac.txt" binding ? If yes does it mean that we
> have to control it inside stmmac driver (no more in glue) ? In this
> case those clocks will become "required" for stm32 and rockship but
> not for others chip. It could create confusion?

A gentle ping. Can you give me your feedback please ?
I will send next patchset version according to your answer.

Thanks in advance

Alex

>
> Best regards
>
> Alex
>
>>
>> regards,
>> Joachim Eastwood